Uploaded October 2023 | Updated September 2026, 3 weeks ago

---

This looks like a set of troubleshooting and cleaning instructions for a washing machine's water inlet.
Here is the grammatically correct and polished English version:
Washing Machine Inlet Filter Cleaning Instructions
Preparation
Turn off the water supply to the washing machine.
Disconnect the L-shaped fitting (or elbow) for the water supply hose from the water inlet.
To prevent water from leaking out due to air pressure in the supply hose, cover the hose connection with a cloth.

First Water Inlet Filter
Gently pull out the mesh filter from the water supply inlet using pliers.
Rinse the mesh filter under running water until it is clean.
Second Water Inlet Filter
(This filter is usually) Integrated with the solenoid housing.
Clean it with a brush, or spray it with water.
Water Inlet Valve Troubleshooting
The water inlet valve opens to allow water to enter the washing machine.
If the water inlet valve is faulty, the laundry tub may fill slowly or not fill at all.
The water inlet valve requires sufficient water pressure to operate correctly.
First, check the water pressure to ensure it is adequate.
If the water pressure is sufficient, try cleaning the screens/filters located inside the water inlet valve's hose connection port.
If the washing machine still fills slowly, replace the water inlet valve.
Reassembly
Insert the mesh filter back into place.
Reattach the L-shaped fitting (or elbow) to the washing machine.