Uploaded June 2026 | Updated September 2026, 2 weeks ago
How to remove, clean and replace the Variable Valve Timing (VVT) solenoid on a 2006 to 2013 Toyota Yaris Mk2 with the 3 cylinder 1.0 litre 1KR-FE petrol engine. If this unit gets clogged up or stops working properly it can cause the following problems:
• Difficulty starting
• Rough Idle
• Poor engine acceleration
• Poor engine performance
• Excessive fuel consumption
• Check engine light
• Increased engine noise (especially when accelerating)
• Misfire when accelerating
You may also get a check engine light caused by a P0011 code. It’s worth cleaning this solenoid first, to see if it will fix the issue. It is recommended that you clean the valve using an EGR & Carb cleaner. Thanks for watching. Please comment, like and subscribe !.
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
©Youtube.com/Screwsnutsandbolts 2026
Read important information below:
Disclaimer:
My videos are a guide to making repairs and also to provide helpful information.
Do not attempt to make any repairs unless you’re sure you know what you’re doing. For more detailed information, if something is not clear to you, or you don't understand something, have the repair carried out by a qualified mechanic or at your local car dealer. Any repair you carry out on your car you do at your own risk.
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.
How to remove, clean and replace the Variable Valve Timing (VVT) solenoid on a 2006 to 2013 Toyota Yaris Mk2 with the 3 cylinder 1.0 litre 1KR-FE petrol engine. If this unit gets clogged up or stops working properly it can cause the following problems:
• Difficulty starting
• Rough Idle
• Poor engine acceleration
• Poor engine performance
• Excessive fuel consumption
• Check engine light
• Increased engine noise (especially when accelerating)
• Misfire when accelerating
You may also get a check engine light caused by a P0011 code. It’s worth cleaning this solenoid first, to see if it will fix the issue. It is recommended that you clean the valve using an EGR & Carb cleaner. Thanks for watching. Please comment, like and subscribe !.
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
©Youtube.com/Screwsnutsandbolts 2026
Read important information below:
Disclaimer:
My videos are a guide to making repairs and also to provide helpful information.
Do not attempt to make any repairs unless you’re sure you know what you’re doing. For more detailed information, if something is not clear to you, or you don't understand something, have the repair carried out by a qualified mechanic or at your local car dealer. Any repair you carry out on your car you do at your own risk.
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.
