Uploaded December 2021 | Updated September 2026, 20 hours ago

---

The Maximum Height setting of the Feed Dog is 3/64 inch or 0.046 inch or 1.19 mm. It is Part #125261. The screws are Part #208; vintagesingerparts.com/products/new-replacement-feed-dog-screws-fits-singer-models-15-201-206-221-222-237-239-301-306-319?_pos=9&_sid=c8a84bd51&_ss=r
How to remove, install, clean, and adjust the feed dog on Singer Model 15-91. How to remove the Needle Plate.

MUSIC: TRAVELLER by the126ers
00:00 INTRO
01:20 THE NAME
02:02 HOW IT WORKS
07:15 WHAT GOES WRONG
09:20 HOW TO DROP FEED
15:39 ABOUT HEIGHT
18:45 NORMAL CLEANING
20:45 REMOVE NEEDLE PLATE
22:15 DEEP DOG CLEANING
27:13 TEST TEETH
30:10 REMOVE DOG
35:20 INSTALL DOG
40:40 INSTALL NEEDLE PLATE
42:38 CHECK DOG HEIGHT
46:37 FACTORY HEIGHT
46:40 THE FEELER GAUGE
48:20 SCRAPE THE BLADES
49:50 BOTTOM OF TEETH BELOW PLATE
51:20 TAPE THE BLADES
53:13 SETTING THE HEIGHT
59:40 ADJUST LENGTHWISE