Uploaded July 2026 | Updated November 2026, 53 minutes ago
๐๐ซ๐จ๐ฃ๐๐๐ญ ๐๐ซ๐ข๐ฌ: drive.google.com/file/d/17nfYIucFv0qoUANXgkwxZuzuZASiRFX1/view?usp=sharing
๐๐ฎ๐ญ๐จ๐๐ฅ๐๐๐ฆ: drive.google.com/file/d/1oNwuRd9sm_NU8OYjbGDd9DoBsV9ZSsob/view?usp=sharing
๐๐.๐๐.๐๐: Updated the launch scripts to make extractor work with Weston 6 terminal
๐๐ผ๐ ๐๐ผ ๐๐ป๐๐๐ฎ๐น๐น
For Project Eris place the spaghettikart_1.0.0_SONYPSC-cfb0146.mod file in the usb:/project_eris/mods folder and it'll auto install next time you boot up.
For Autobleem extract the zip archive and place the spaghettikart folder in usb:/Apps
Place your Mario Kart 64 .z64 rom in the spaghettikart folder. Launch it and it'll extract the assets. Once extracted it'll start the game. You can delete the .z64 rom afterward.
=====================================================================
๐๐ข๐ญ๐ญ๐๐ซ ๐ ๐ข๐ฑ
I notice some jitteriness that occurs when playing on the Stock Weston compositor. For smoother playback, you can enable this updated Weston 6.0.0 compositor:
youtube.com/watch?v=Z-1lsMNMu-I
if you prefer playing it on the Stock Weston, enabling Vsync may improve the jitter at the cost of performance.
Messing with the settings can cause slowdown even when just navigating. Once you have your settings set, I suggest closing the App and restarting.
I was able to achieve a consistent 30fps throughout. The performance may drop at the end of a race during the results screen. If you experience severe slowdown, try deleting the spaghettify.cfg.json to restore the settings to default.
Don't expect too much, it's still a work in progress. I modified the startup behavior to have it preload some shaders to fix a audio hitch and improve performance. If you change the startup behavior option to something else it'll have those issues again.
source code: github.com/shoddydev/SpaghettiKart-PSC
๐๐ซ๐จ๐ฃ๐๐๐ญ ๐๐ซ๐ข๐ฌ: drive.google.com/file/d/17nfYIucFv0qoUANXgkwxZuzuZASiRFX1/view?usp=sharing
๐๐ฎ๐ญ๐จ๐๐ฅ๐๐๐ฆ: drive.google.com/file/d/1oNwuRd9sm_NU8OYjbGDd9DoBsV9ZSsob/view?usp=sharing
๐๐.๐๐.๐๐: Updated the launch scripts to make extractor work with Weston 6 terminal
๐๐ผ๐ ๐๐ผ ๐๐ป๐๐๐ฎ๐น๐น
For Project Eris place the spaghettikart_1.0.0_SONYPSC-cfb0146.mod file in the usb:/project_eris/mods folder and it'll auto install next time you boot up.
For Autobleem extract the zip archive and place the spaghettikart folder in usb:/Apps
Place your Mario Kart 64 .z64 rom in the spaghettikart folder. Launch it and it'll extract the assets. Once extracted it'll start the game. You can delete the .z64 rom afterward.
=====================================================================
๐๐ข๐ญ๐ญ๐๐ซ ๐ ๐ข๐ฑ
I notice some jitteriness that occurs when playing on the Stock Weston compositor. For smoother playback, you can enable this updated Weston 6.0.0 compositor:
youtube.com/watch?v=Z-1lsMNMu-I
if you prefer playing it on the Stock Weston, enabling Vsync may improve the jitter at the cost of performance.
Messing with the settings can cause slowdown even when just navigating. Once you have your settings set, I suggest closing the App and restarting.
I was able to achieve a consistent 30fps throughout. The performance may drop at the end of a race during the results screen. If you experience severe slowdown, try deleting the spaghettify.cfg.json to restore the settings to default.
Don't expect too much, it's still a work in progress. I modified the startup behavior to have it preload some shaders to fix a audio hitch and improve performance. If you change the startup behavior option to something else it'll have those issues again.
source code: github.com/shoddydev/SpaghettiKart-PSC

![[Guide] Restore any US/EU PlayStation Classic back to Stock without a Backup with Debian USB
Warning! Messing around with this can potentially brick your PSC. Make sure to follow the steps carefully. If youre nervous then I dont recommend doing this. But if you like to experiment or you have experience with Linux then it should be okay.
DebianUSB: https://drive.google.com/file/d/1uLT5NsGfvJ6wTHmKPTvoW2BYWR0Zc4WZ/view?usp=sharing
Etcher: https://etcher.balena.io/
(Rufus works too)
What Im using:
SanDisk 32GB Cruzer Blade USB 2.0: https://www.amazon.com/dp/B005FYNT3G?ref=ppx_yo2ov_dt_b_fed_asin_title
AuviPal 3-Port Micro USB OTG: https://www.amazon.com/dp/B083WML1XB
TP-Link USB WiFi (TL-WN725N): https://www.amazon.com/dp/B008IFXQFU
This guide is useful for those who may have purchased a used PSC that is already hacked and want to restore it back to stock without a backup. Or for those who may have lost their backup or just want to start over from scratch without figuring that stuff out.
This project uses a modified version of donlucas PSClassic Debian and notv37s PlayStation_Classic_rootfs_Rebuilder.7z [Guide] Restore any US/EU PlayStation Classic back to Stock without a Backup with Debian USB](https://i.ytimg.com/vi/TblVeoXKcSM/mqdefault.jpg)







![[RELEASE] mkxp-z for PlayStation Classic (RPG Maker XP VX VX Ace Player)
Autobleem Ver: https://drive.google.com/file/d/1-7oEy9rirUG34g5pTYeHBfyLxxZCIojB/view?usp=sharing
Project Eris Ver: https://drive.google.com/file/d/1RW0_apVfnv3H0FILsZQZYUuTckgZSXc7/view?usp=sharing
For Autobleem copy the mkxp-z folder to /media/Apps
For Project Eris, copy the mkxp-z folder to /media/project_eris/etc/project_eris/SUP/launchers
Note: /media/ is your usb
*5.07.2024 update* https://www.youtube.com/post/UgkxVrCOw4Kpbl15nHWokeYUe4WaHnK5TykZ
How to use:
The basic idea is you navigate to where your rpg maker game is and type in mkxp-z.armv7l in the terminal and itโll launch the game. hopefully you know some basic linux commands. if not then here are some useful commands:
ls = list the contents of the directory
cd = change directory. for example, cd foldername
cd .. = goes up one directory
exit = exit terminal
When you first open the app itll launch a terminal, first thing you want to do is test out some samples. type cd sample to enter the sample folder, then type ls to list the contents. you should see the following folders:
KN_E, rmvx, rmvxace, and rmxp
Lets try KNIGHT-BLADE -HOWLING OF KERBEROS-
type cd KN_E to enter the folder
then type in mkxp-z.armv7l
(note you can just type mkx partially then press tab to autofill the rest)
and voila the game launches. to exit you can either exit from the game menu or press reset. If you have a keyboard you can press f12 to return to the game title screen.
The other sample games are demos i made for each engine. it was made more to use as a template to launch your own games. instead of launching these games through terminal, you can copy them all to /media/Apps and itll show up in the Autobleem Menu. For Eris users copy them to /media/project_eris/etc/project_eris/SUP/launchers
Now you can play them from the main menu like you would any standalone App. You can also replace them with your own game. For example, lets say you have a RPG Maker VX Ace game.
After you copy the rmvxace to /media/Apps, delete everything inside the folder except:
app.ini, icon.png, mkxp.json, run.sh
then copy your RPG Maker VX Ace game in. you can rename the rmvxace folder to any name you like, and you can change the icon.png or edit the app.ini to change the games title.
For Project eris users, delete everything except:
Game.png, launch.sh, launcher.cfg, and mkxp.json
Theres probably a lot to cover but its best to just try it out and learn on the fly. If you need help, hit me up. you can also watch some of my live streams and videos for clues.
If the Audio stop working, enter this command:
pulseaudio โstart
*note* if youre on a ext4 formated USB, you need to enter this command in terminal for pulseaudio to work
chown -R root:root /media/Apps/mkxp-z/home
mkxp is a open source implementation of the Ruby Game Scripting System (RGSS) by Ancurio. Used in the popular game creation software RPG Maker XP, RPG Maker VX and RPG Maker VX Ace
mkxp-z is a heavily modified fork of mkxp by Struma which adds more features and compatibility such as the ability to play Pokemon fan games. However only newer fan games made with Pokรฉmon Essentials v19 or higher work. Pokemon Desolation is a good game to try out. Note that for pokemon fan games, you should start the game without full screen, then in the in-game option set it to full screen there. Otherwise itโll play faster for some reason.
You can edit the mkxp.json file to disable full screen and tweak other settings. Ive included a mkxp.json configuration file optimized for pokemon fan games in the z.extra/mkxp.json_templates/pokemon folder. just copy the mkxp.json file in your pokemon game folder.
It also works with a wide range of RPG Maker VX, VXace and XP games. however I estimate only about 50% of existing games work out the box. The reason being is that RPG Maker was designed specifically for windows, and many games use custom scripts that rely heavily on win32api libraries. you know those .dll files. mkxp was designed more as a tool to allow devs to port games to other platforms such as linux and mac, but it also works pretty good as a player. Just dont expect all games to work. Typically games that dont use custom scripts, or scripts written in pure Ruby should work. A win32_wrap script provided by Splendide Imaginarius was added to increase compatibility for win32api games.
Shout out to the MapleShrine Team for this amazing engine:
https://github.com/mkxp-z/mkxp-z
Ill like to develop a PSC exclusive game with it someday. Mkxp-z uses Ruby 3.1 instead of 1.8 found in the original RPG maker software so that means theres a lot of advanced stuff we can do. like if you test out my rmvxace sample, I got it to where the main character teleports into the world of Final Fantasy 7 with new dialogue and art. Since the PSC comes bundled with 20 games, I can utilize those pre-loaded games and add new content into it via hacked save states [RELEASE] mkxp-z for PlayStation Classic (RPG Maker XP VX VX Ace Player)](https://i.ytimg.com/vi/XDlEZuSAQnE/mqdefault.jpg)
