Uploaded April 2026 | Updated September 2026, 1 week ago
In today's video I'm going to be rebuilding my All-SSD NAS into a much higher end case gaining tonnes more drive bays and an overall much nicer system! We'll talk about the case I went for, run through the hardware we'll be installing, run through the build process and then talk about a couple of issues I had along the way!
Support my Channel on Patreon & Buy Me a Coffee: camerongray.me/support
Case was purchased from: geni.us/apQVhK (eBay Affiliate) - I'd recommend watching the video first before purchasing as the case had a few issues.
camerongray.me
instagram.com/camerongray1515
https://bsky.app/profile/camerongray.me
Chapters:
00:00 - Introduction
01:31 - Tour of the New Case
08:24 - Tour of the Original Build
11:14 - Hardware We'll be Using
13:30 - Putting it all together
27:24 - Build Complete - Some Issues!
31:24 - 3D Printed Fan Shroud
35:00 - Drive Labelling
36:07 - Power Consumption
37:37 - Rack Rails
38:25 - Installing in the Rack
39:15 - Conclusion
*AFFILIATE LINKS NOTICE:*
Product links under this video marked “(Affiliate)” are affiliate links where I may receive a small commission on qualifying sales. Affiliate programs that I am a member of include, _but are not limited to:_ Amazon Associates, eBay Partner Network and AliExpress Affiliates.
As an Amazon Associate I earn from qualifying purchases.
Purchasing through these affiliate links will not cost you any more money, however the commission earned significantly helps fund the production of videos on my channel.
In today's video I'm going to be rebuilding my All-SSD NAS into a much higher end case gaining tonnes more drive bays and an overall much nicer system! We'll talk about the case I went for, run through the hardware we'll be installing, run through the build process and then talk about a couple of issues I had along the way!
Support my Channel on Patreon & Buy Me a Coffee: camerongray.me/support
Case was purchased from: geni.us/apQVhK (eBay Affiliate) - I'd recommend watching the video first before purchasing as the case had a few issues.
camerongray.me
instagram.com/camerongray1515
https://bsky.app/profile/camerongray.me
Chapters:
00:00 - Introduction
01:31 - Tour of the New Case
08:24 - Tour of the Original Build
11:14 - Hardware We'll be Using
13:30 - Putting it all together
27:24 - Build Complete - Some Issues!
31:24 - 3D Printed Fan Shroud
35:00 - Drive Labelling
36:07 - Power Consumption
37:37 - Rack Rails
38:25 - Installing in the Rack
39:15 - Conclusion
*AFFILIATE LINKS NOTICE:*
Product links under this video marked “(Affiliate)” are affiliate links where I may receive a small commission on qualifying sales. Affiliate programs that I am a member of include, _but are not limited to:_ Amazon Associates, eBay Partner Network and AliExpress Affiliates.
As an Amazon Associate I earn from qualifying purchases.
Purchasing through these affiliate links will not cost you any more money, however the commission earned significantly helps fund the production of videos on my channel.
