Reading Data Transmitted From Keyfobs At 433MHz With A Raspberry Pi @DevelopIT

Reading Data Transmitted From Keyfobs At 433MHz With A Raspberry Pi @DevelopIT

Uploaded July 2019 | Updated September 2026, 2 days ago

Using a Python script on a Raspberry Pi to read the data transmitted from a keyfob at 433MHz.

Source code can be found here:
github.com/BirchJD/RPi_433MHz

Patreon To Support The Content On This Channel:
patreon.com/_DevelopIT

GitHub Repository:
github.com/BirchJD

Web Site:
newsdownload.co.uk

Reading Data Transmitted From Keyfobs At 433MHz With A Raspberry Pi

Using ESP32 With LCD ILI9341, TOUCH XPT2046 & SPI SD Card

ColecoVision Compatible Resin Printed Cartridge Case

Emulating a Jupiter Ace Using Only ANSI C

ZX81 ROM on a ColecoVision Computer

ESP32 GUI Displaying Image Files On The ILI9341 LCD Display

Designing & 3D Printing a Coleco Vision Controller Case

Awesome ROM Replacement For The Sinclair ZX Spectrum

Power Rail Splitter - Virtual Ground Circuit

RPi Pico, Sharing RAM Between Cores Without Hanging

Arduino IDE Developing On A Raspberry Pi

Ethernet Crossover Cable Fast Direct Connection To A Raspberry Pi

Reading Data Transmitted From Keyfobs At 433MHz With A Raspberry Pi