RDWorks Learning Lab 226 Can my Beam Collimator Work @SarbarMultimedia

Uploaded January 2022 | Updated September 2026, 1 week ago

After some crude experiments with lenses in the previous session, I settled on a promising configuration that seemed to allow me to control beam divergence. The main goal for me was to try and control the 7 mrad beam divergence on my RF machine. With a claimed beam diameter of 2mm and 30 watts of power, this machine could turn into a CUTTING monster if only I could keep that 2mm beam parallel and retain its Gaussian intensity profile.over the table area.
I modified a redundant X3 beam expander to perform proper evaluation of my test configuration.
My acquired knowledge of how laser beams have no respect for lens theory meant I was entering uncharted territory. Pre-testing established it was possible to control beam divergence but could I retain Gaussian intensity?

RDWorks Learning Lab 226 Can my Beam Collimator Work

RDWorks Learning Lab 207 The Importance of Beam Intensity

RDWorks Learning Lab 163 Lenses Part 2 Lets Focus

RDWorks Learning Lab 181 Redsail clone upgraded head

$RDWorks Learning Lab 210 Lets Focus on Focus AGAIN The dictionary describes a focal point as that place where parallel rays of light passing through a lens are refracted to converge on a single point. That may apply to visible light for cameras and telescopes where light sources are uniform and lenses are high precision and usually multiples, but in the world of Chinese lasers things are a long way from that dictionary definition. The use of a single lens and then a choice of just two forms, plano convex and meniscus, is the first disadvantage. The simple spherical geometry of these lens forms will never achieve that dictionary perfection. The longer the focal length of the lens, the greater the imperfection. The single feature that ALL lasers beams posses is a non-uniform intensity profile. The perfect laser beam will conform to a Gaussian intensity distribution. ( a bell shape graph) where the central light intensity is many times greater than the outer regions of the beam. Combine the focussing weakness of spherical lens geometry with the non uniform intensity within the laser beam and we no longer have that idealized model of focus that we are all taught. We set the focal point for a lens to that distance where we create the smallest burn spot or the thinnest drawn line. This is not setting the LIGHT focal point but that point where the the light INTENSITY is sufficient to damage the material we are marking/cutting . I clearly demonstrate that the traditional model of focus is of very limited value in our weird world of lasers.$