Ash Stag WoodworkingHas the lift system on your table saw stopped working? I had the same issue, and hereβs how I fixed it. After two years of intense use, my Makita MLT100 table saw developed a broken lift mechanism. The culprit? A worn-out gearbox. In this video, I show you exactly how I disassembled the saw, replaced the part, and got everything working again.
β Is your table saw stuck or refusing to raise/lower the blade? β Need to repair a broken table saw lift system yourself? β Looking for a fix for the Makita MLT100 or similar saws?
This guide will help you diagnose and fix your saw without replacing the whole unit.
π *CHAPTERS/TIMESTAMPS*
00:00 Intro 00:20 What part I will replace in this video 01:30 Disassembling 03:10 Replacing the broken part 03:38 Reassembling 04:54 Outro
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!
Makita table saw owners, this will break someday | lift system repairAsh Stag Woodworking2021-04-26 | Has the lift system on your table saw stopped working? I had the same issue, and hereβs how I fixed it. After two years of intense use, my Makita MLT100 table saw developed a broken lift mechanism. The culprit? A worn-out gearbox. In this video, I show you exactly how I disassembled the saw, replaced the part, and got everything working again.
β Is your table saw stuck or refusing to raise/lower the blade? β Need to repair a broken table saw lift system yourself? β Looking for a fix for the Makita MLT100 or similar saws?
This guide will help you diagnose and fix your saw without replacing the whole unit.
π *CHAPTERS/TIMESTAMPS*
00:00 Intro 00:20 What part I will replace in this video 01:30 Disassembling 03:10 Replacing the broken part 03:38 Reassembling 04:54 Outro
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!Track Saw 90 Degree Alignment CheckAsh Stag Woodworking2025-08-12 | Track saw 9090 degree alignment check made easy β Just cut, flip, and see if your edges match. Works on Festool (I used the Festool TS 55 in this video), Makita, DeWalt and more. No special tools, just your saw. π§
See my other video for how to fine-tune the blade angle.
π Subscribe for more woodworking tips & pro tool tweaks!
#FestoolTS55 #TrackSawTips #WoodworkingTools #90DegreeCut #DIYWoodworkingGenius DIY Dust Collection Connectors - FREE STL!Ash Stag Woodworking2025-07-20 | Dust collection just got smarter π¨ I designed and 3D printed these magnetic hose connectors to snap together fast: no screws needed. They stay perfectly tight thanks to built-in magnets.
The STL files for the tool side, hose side and the nozzle are free to download from my site. You can grab them for free, or choose to pay what you think they're worth. Thank you if you do, it helps support the time and effort I put into designing these!
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!Why I Love the Festool Centrotec system πAsh Stag Woodworking2025-07-16 | Festool Centrotec lets you swap from drill to driver in seconds. No chuck. No hassle. Just click out. Click in. Done. Tools: Festool 577619 Cordless Drill C 18 HPC 18V 4.0 Ah: amzn.to/4lZhES2 Festool 492135 Centrotec Chuck: amzn.to/44RULZE Festool 577396 Drill bit case: amzn.to/46KwMhu Festool 205097 Bit Holder: amzn.to/3UgE19y π‘Perfect for fast-paced workflows Subscribe for weekly woodworking hacks!
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!My Favorite Festool Accessory (BSTA HS D 3.5 CE)Ash Stag Woodworking2025-07-14 | Drill countersink bits like the Festool BSTA HS D 3.5 CE make a huge difference in wood finishing πͺ΅ No more tear-out, no more trial and error, just clean, flush screw heads every time. Works great with the Centrotec system from festool. Totally worth it.
π Get the bit here amzn.to/4699emo π Subscribe for more smart woodworking tips!
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!How to Cut Coves on a Table SawAsh Stag Woodworking2025-07-11 | Cutting coves on a table saw? Here's how to shape smooth curves with just a tilted jig and some patience.
βοΈ Tools used: table saw
π‘ Learn more tricks by subscribing to my channel
#DIYWoodworking #TableSawTricks #WoodworkingTips #AshStagWoodworking #CoveCuttingTurn a Rough Plank Into Perfect LumberAsh Stag Woodworking2025-07-09 | Turning rough oak into clean, usable lumber in just a few steps. Just a planer, track saw, and table saw β¨ Clean edges. Perfect square. Ready to build.
#woodworkingtips #festoolts55 #diywoodprojects #roughlumber #ashstagwoodworkingFS Rapid Clamp: Festoolβs Smartest Rail AccessoryAsh Stag Woodworking2025-07-07 | The Festool FS Rapid clamp makes guide rail work faster, easier, and honestly more fun. π Lock. Release. Slide. Lock again: no threads, no knobs, just quick precision. If you use a track saw often, this clamp's a no-brainer. π Tool: Festool FS-Rapid Clamp. Buy here: amzn.to/3ZTFdD4 π¬ Like quick shop tips? Follow me for more
#FSRapid #Festool #woodworkingtips #tracksaw #DIYwoodshopTrack Saw Maintenance Tips You Should KnowAsh Stag Woodworking2025-07-05 | If you have a track saw, make this a habit: π§Ό Clean the blade π§ Check for track play check this video for more info: youtube.com/shorts/9totd3Q1b-Y π§΄ Wax the rail slot (no sprays!)
Itβs the weekly routine that I use to keep my Festool TS 55 track saw cutting smooth, straight, and safe.
β³οΈ Want more tips like this? Subscribe to my channel
#tracksaw #Festooltips #woodworkingroutine #toolmaintenance #DIYwoodworkingPerfect Track Saw Setup for Cutting Plywood Factory EdgesAsh Stag Woodworking2025-07-03 | Cutting off the factory edge of your plywood? If you're placing your track saw too close, you're making dust explode everywhere π€ Hereβs a Festool stop block trick that spaces your rail just right, and it makes all the difference.
#festooltracksaw #woodworkinghack #diywoodworking #ashstagwoodworking #tracksawtipsHow to Set #TS55 Track Saw Blade Depth CorrectlyAsh Stag Woodworking2025-07-01 | Never guess your track saw blade depth again! This quick tip helps you get cleaner and safer cuts with your Festool TS 55 (or any other track saw) by setting the blade correctly past the material. Perfect for sheet goods and furniture panels.
Before you use this trick, be sure to calibrate your track saw. Learn how to do this here: youtube.com/shorts/sPylAgK4yJc
#Festool #TrackSawTips #WoodworkingBasics #ToolTutorial #AshStagWoodworkingMost TS 55 Users Forget This #festool #festoolts55Ash Stag Woodworking2025-06-29 | Most Festool TS 55 users forget to flip this little window down. But doing it improves both dust collection and cut quality. It takes 1 second, and makes all the difference.
Want more of these pro tips? π Subscribe and follow me
#festooltips #tracksawmistake #woodworkingshorts #ts55 #ashstagwoodworkingNew Festool Clamp in Action FS EZ 150/2Ash Stag Woodworking2025-06-27 | Just got my hands on the new FS-EZ 150/2 one-hand clamp from Festool π₯ It locks into any Festool guide rail, MFT table or clamping slot, and it even spreads too! Minimal effort. Maximum flexibility. Perfect for fast one-handed clamping.
π οΈ Tool used: Festool FS-EZ 150/2 Clamp
#Festool #WoodworkingTools #MFTtable #ClampingSystem #AshStagWoodworkingHow to Calibrate TS55 Depth Stop Like a Pro #festoolAsh Stag Woodworking2025-06-25 | Stop guessing: calibrate your Festool TS55 like a pro. This micro-adjust trick gets you laser-accurate depth settings every time. π― For Festool users who want next-level precision
#woodworkingtip #festoolts55 #tracksawsetup #tooltutorial #diywoodworkingFix Rail Play on Your #festool TS55 in 30 Seconds!Ash Stag Woodworking2025-06-23 | Is your Festool TS 55 track saw sliding loosely on the rail? Hereβs a super quick tip to eliminate the slop and get perfect, accurate cuts every time. Just one small twist can make a big difference.
π οΈ Fix: Tension knobs on the baseplate β Simple, effective, and takes 30 seconds
#festoolts55, #tracksawtips, #woodworkingshorts, #toolsetup, #precisioncuttingHow to Cut a Recessed Section with a Track Saw (#Festool TS55 #TrackSaw)Ash Stag Woodworking2025-06-19 | Need to cut out a clean recessed section in plywood? Hereβs how I use the Festool TS55 track saw to make accurate plunge cuts, quick, precise, and super clean.
#Woodworkingβ#FestoolTS55 #shorts #ashstagwoodworking #woodworkingtips#Festool TS55 #tracksaw Dust Collection Hack You Shouldnβt IgnoreAsh Stag Woodworking2025-06-18 | Even with a dust extractor attached, the Festool TS55 track saw leaks sawdust through the blade change access hole. In this short video, Iβll show you exactly where the dust escapes, and how a simple piece of tape completely solves it.
#Woodworkingβ#FestoolTS55β#DustCollectionβ#woodworkingtips #shorts #ashstagwoodworkingMost Woodworkers Do This Wrong β Changing #festool TS55 #sawbladeAsh Stag Woodworking2025-06-17 | Struggling to change the blade on your Festool TS 55? Hereβs the trick most people miss: raise the riving knife before removing the blade. A small step that makes a big difference.
π οΈ More tips? Subscribe for smarter woodworking, one step at a time.
#festoolts55 #woodworkingtips #ashstagwoodworking #shorts #woodworking #woodworkingshopI Use Threaded Inserts This Way (You Should Too)Ash Stag Woodworking2022-11-11 | Installing threaded inserts in wood seems simple, until it goes wrong. In this video, Iβll show you the exact method I use to install both threaded inserts and T-nuts cleanly, securely, and fast.
β No split wood β just solid, long-lasting threads β Pick the right insert, drill bit, and installation method β Works for hardwood, plywood, MDF and more
00:00 Why do you need to use threaded inserts 00:34 Threaded inserts vs T-nuts 00:51 How to install threaded inserts 01:57 How to install T-nuts 03:04 Ho to secure threaded inserts in place
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!Festool TS 55 Track Saw: I Canβt Believe I Waited So LongAsh Stag Woodworking2022-10-23 | Thinking about buying the Festool TS 55 track saw? Hereβs what you need to know before you spend your money. I recently got my hands on the *Festool TS 55 Fan Edition* (FEBQ), and in this honest, no-fluff review, Iβll show you exactly whatβs in the box, my first impressions, and whether this track saw lives up to the hype.
β Wondering if the TS 55 is worth the money? β Debating between the TS 55 and another plunge saw? β Curious about the Fan Edition and what makes it different?
This video will help you decide if the Festool TS 55 deserves a spot in your workshop.
- Why I switched to Festool for my woodworking setup β youtu.be/Rn5NGJhI55c - Mentioned in this video: @FestoolINT @pica-markergermany6645
π *CHAPTERS/TIMESTAMPS*
00:00 What I will show you in this video 00:23 Disclaimer 00:45 Festool TS 55 Unboxing 01:31 Festool TS 55 FEBQ Review 03:08 How to change the blade on a Festool TS 55 03:39 The tracks I bought & why 05:28 Testing the Festool TS 55 track saw 06:18 Bonus #1 06:53 Bonus #2 07:26 Is the Festool TS 55 worth the money?
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!Im switching to Festool, and heres why (5 reasons)Ash Stag Woodworking2022-10-09 | Thinking about switching to Festool for your woodworking shop? Hereβs what you need to know before making the leap. In this video, I reveal 5 personal reasons why I decided to leave budget tools behind and commit to the Festool system, and why it might be the smartest long-term move you can make.
β Wondering if Festool is really worth the money? β Curious how Festool compares to Makita or other pro brands? β Thinking about upgrading your tools but donβt know where to start?
This video breaks it all down, with honest insights from my own experience.
β οΈ NOTE: I mistakenly mentioned a 10-year warranty in the video. The actual warranty is 3 years, but Festool guarantees spare parts for 10 years after discontinuation of any tool. Unfortunately, I can't update the video itself, so I'm correcting that here.
00:00 The problems I had with cheap tools 00:31 Why switching to Festool 01:33 Is Festool Worth the money? 01:56 Reason NΒ°1 02:20 Reason NΒ°2 02:47 Reason NΒ°3 03:15 Reason NΒ°4 03:39 Reason NΒ°5 04:00 Festool for my future workshop
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!I Use This Trick for Years Now! #SHORTSAsh Stag Woodworking2022-10-07 | With this lifehack, you can easily clamp miters thanks to this easy woodworking jig made from a piece of scrap wood. It is simple to make and take just a few minutes. I use this trick for years now, and it works every time.
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Email β christophe@ashstagwoodworking.com Feel free to email me about sponsorship, advertising, or endorsements.
π¬ *THANK YOU FOR WATCHING*
If you enjoyed this build: π Like the video π Subscribe to the channel π¬ Drop a comment β I read every one!
#ashstagwoodworking #shorts #woodworkingtips
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!NEVER Make a Cut Without This Hold-Down Stick (Seriously)Ash Stag Woodworking2022-09-26 | NEVER cut wood without this simple hold-down stick. Itβs the easiest way to boost your table saw safety and keep your hands far from danger.
In this video, I show you exactly how to build a DIY hold-down stick thatβs: β more stable than a push stick β easy to grip β designed for full control on the table saw and miter saw
The best part? You can build it with just a few wood scraps from your shop. No fancy tools or expensive materials required, just a smart design that works.
Watch this project and discover a simple yet effective upgrade for your workshop safety.
β οΈ *PLEASE NOTE: Free plans for this project are no longer available* due to data loss. Thank you for your understanding.β οΈ
00:00 Why I made this hold down stick / push stick 00:31 Why should you make this hold-down stick? 01:18 How to build a hold down stick 02:48 Making the curved handle 03:55 Free plans
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!The Jig That Makes Perfect Half-Lap Joints (Fast!)Ash Stag Woodworking2021-08-16 | Want perfect half-lap joints every time? Build this simple jig for your table saw. With just a few scrap pieces and a solid design, you can build a half-lap joint jig that delivers clean, consistent results, without measuring over and over again.
This jig works with your crosscut sled and helps you make: β Fast and accurate half-lap joints β Consistent depth and alignment β Clean cuts on any size stock
Perfect for furniture joinery, frames, or DIY woodworking builds where strength and precision matter.
β οΈ *PLEASE NOTE: Free plans for this project are no longer available* due to data loss. Thank you for your understanding.β οΈ
π *CHAPTERS/TIMESTAMPS*
00:00 What is a half lap joint? 00:29 What you will see in this video 00:48 Building the half-lap joint jig 02:04 Making the homemade knobs 02:43 Demonstration of the half lap joint jig
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!DIY Spirit Level from Baltic Birch (Surprisingly Precise!)Ash Stag Woodworking2021-07-19 | Can a homemade wooden spirit level really be accurate? Yes, and I built one to prove it. In this video, I show you how I made a DIY waterpas from Baltic birch plywood using just a few simple tools, a small vial, and a whole lot of curiosity.
Why buy a plastic one, when you can build something: β solid β repairable β and actually beautiful to look at?
Plus: I show you how to calibrate it for accuracy.
π *CHAPTERS/TIMESTAMPS*
00:00 What you will see in this video 00:37 Making the base of the spirit level 01:01 The bubble level vial holder 02:13 Finishing the base 03:09 Assembling 03:34 Installing the rubber caps 04:33 How to check your spirit level
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!This Self-Clamping Corner Clamp Locks Corners Instantly (And Its DIY!)Ash Stag Woodworking2021-07-05 | Tired of fiddling with big, clumsy corner clamps? Try this instead. I designed a self-clamping corner jig that holds your workpieces perfectly at 90Β° β with just one hand. No extra tools, no awkward setups. Just press and it locks in place.
Itβs fast, repeatable, and incredibly useful for: β boxes β frames β cabinets β¦ or any woodworking project that needs square corners.
Best part? You can build it from scrap plywood in under an hour.
β οΈ *PLEASE NOTE: Free plans for this project are no longer available* due to data loss. Thank you for your understanding.β οΈ
π *CHAPTERS/TIMESTAMPS*
00:00 Why you'll need this corner clamps too 00:14 What you will see in this video 00:28 How to build this corner clamp 03:14 More ideas for your workshop
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!Sharpen Drill Bits With This Jig (Works Every Time)Ash Stag Woodworking2021-06-29 | Want to Sharpen Drill Bits the easy way? In this video, I show you how to build a simple jig that brings dull twist bits back to life, accurately, consistently, and without expensive tools.
This DIY sharpening jig: β Helps you sharpen drill bits at the right angle β Works with standard twist bits β Is made from scrap plywood β Works on a basic bench grinder
So if you're tired of tossing dull bits, or wasting time with guessing, build this once, and sharpen them forever.
β οΈ *PLEASE NOTE: Free plans for this project are no longer available* due to data loss. Thank you for your understanding.β οΈ
π *CHAPTERS/TIMESTAMPS*
00:00 Intro 00:12 What you will see in this video 01:20 Building the drill bit sharpening jig 1 06:00 The mistake I made 06:57 Building the drill bit sharpening jig 2 09:00 Sharpening drill bits demonstration 09:37 Outro
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!The Ultimate Sanding Table β Dust Collection + Storage!Ash Stag Woodworking2021-04-19 | Tired of sanding dust and never finding the right sandpaper? This DIY downdraft table solves both. In this video, I show you how to build a DIY downdraft table with a clever twist: it includes built-in storage for three rolls of sandpaper, so your most-used grits are always within reach. No more digging through drawers or wasting time. Just sand, switch rolls, and keep working, all while the table pulls fine dust down and out of the way.
This build is: β Compatible with any shop vac or dust collector β Built from plywood and a few simple materials β Designed for clean, efficient sanding β Perfect for small or busy workshops
β οΈ *PLEASE NOTE: Free plans for this project are no longer available* due to data loss. Thank you for your understanding.β οΈ
π *CHAPTERS/TIMESTAMPS*
00:00 Intro 00:11 Building the downdraft table 01:45 Making the downdraft table airtight 02:00 Perforated top 02:35 Making the sandpaper storage 03:28 Assembling 03:50 Demonstration
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!I Built a Table Saw Mill to Turn Logs Into Lumber (It Works!)Ash Stag Woodworking2020-12-21 | Did you know you can mill your own lumber using just a table saw? In this video, I show you how I built a table saw mill, a simple jig that lets you cut small logs or rough wood into usable boards for your woodworking projects.
Perfect for: β Milling small logs or branches β Processing scrap wood into usable stock β Creating thin, flat boards from raw material β Small workshops without a bandsaw or jointer
This jig is built from plywood, designed for accuracy, and works great on compact table saws.
β οΈ *PLEASE NOTE*: *Free plans for this project are no longer available* due to data loss. Thank you for your understanding.β οΈ
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!Build This Hold Down Stick β Save Your FingersAsh Stag Woodworking2020-11-23 | Still guiding narrow cuts with your fingers? Stop. This DIY hold-down stick gives you safe, stable control at the table saw or miter saw β and itβs built entirely from scrap wood in under an hour.
β Keeps your hands far from the blade β Comfortable, grippy, and surprisingly precise β Designed for small shops and big peace of mind
β οΈ *PLEASE NOTE*: *Free plans for this project are no longer available* due to data loss. Thank you for your understanding.β οΈ
π *TIMESTAMPS*
00:00 what I will make in this video 00:12 What you need to make this hold down stick 00:21 Making the fingers 02:20 Making the handle 03:37 Tape for better grip 03:53 Assembling 04:03 Demonstration
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!How I mix epoxy glue #SHORTSAsh Stag Woodworking2020-11-20 | This is my first YouTube SHORTS video in which I made a B roll video of mixing epoxy glue. This was just a fun project and I hope you enjoy this too.
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Email β christophe@ashstagwoodworking.com Feel free to email me about sponsorship, advertising, or endorsements.
π¬ *THANK YOU FOR WATCHING*
If you enjoyed this build: π Like the video π Subscribe to the channel π¬ Drop a comment β I read every one!
#ashstagwoodworking #shorts #woodworkingtips
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!This Jig Makes Perfect Wooden Knobs (FAST)Ash Stag Woodworking2020-08-24 | Why keep buying wooden knobs when you can make better ones yourself? With this simple jig, you can quickly create custom wooden knobs for jigs, clamps, drawers, or tools β all without a lathe, and using only scrap wood.
β Fast, repeatable, and satisfying to make β Works for any size or shape β Saves money and adds a handmade touch to every build
β οΈ *PLEASE NOTE*: *Free plans for this project are no longer available* due to data loss. Thank you for your understanding.β οΈ
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!Stapler + Nailer in One? Stanley Bostitch SB 2-in-1 ReviewAsh Stag Woodworking2020-08-17 | πππ Link to buy this tool: amzn.to/4e7FzvF πππ
Confused about which nail gun to buy? In this video, I review the Stanley Bostitch SB 2-in-1, and explain why it might (or might not) be the right tool for your workshop. This 2-in-1 nailer and stapler is designed for small to medium woodworking projects. But how well does it really perform? And is it the right choice for you?
Youβll learn: β When to use brad nails vs. staples β What this tool is great at β and where it falls short β Whether a 2-in-1 makes sense for your shop β My honest opinion after real use
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Email β christophe@ashstagwoodworking.com Feel free to email me about sponsorship, advertising, or endorsements.
π¬ *THANK YOU FOR WATCHING*
If you enjoyed this build: π Like the video π Subscribe to the channel π¬ Drop a comment β I read every one!
#ashstagwoodworking #nailgun #woodworkingtools
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!Build This DIY Circular Saw Crosscut Jig (Straight Cuts Every Time)Ash Stag Woodworking2020-08-10 | Still struggling to get clean, square cuts with your circular saw? This DIY circular saw crosscut jig makes your cuts straighter, safer, and more repeatable, no more wobbly freehand lines or clamped guides that shift mid-cut.
β Works with any standard circular saw β Built from plywood and scrap materials β Ideal for beginners, small shops, and portable setups β Lets you cut with confidence, even without a table saw
β οΈ *PLEASE NOTE*: *Free plans for this project are no longer available* due to data loss. Thank you for your understanding.β οΈ
π *TIMESTAMPS*
00:00 What I will make in this video 00:33 Preparations 02:05 Making the base of the crosscut jig 03:24 Assembling the circular saw crosscut 04:02 Making the adjustable fence 04:45 Homemade wooden knob 05:03 Metal guide bars 06:13 Making a reference cut 06:32 Finishing the crosscut jig 07:04 Demonstration of the DIY circular saw crosscut jig
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!Makita HR2470FT Review β My Honest Take After Real UseAsh Stag Woodworking2020-06-22 | π Link to buy this tool: Amazon alternative: amzn.to/4n7N8GV
Is the Makita HR2470FT still worth buying today? In this hands-on review, I put this rotary hammer through real tests, drilling concrete, driving anchors, and comparing it to other tools in its class. No hype. Just what worksβ¦ and what doesnβt.
β Powerful 2-in-1 rotary hammer + chisel function β Ideal for concrete, brick, stone and heavy-duty anchors β Pros, cons, and real jobsite results β My honest verdict after real use
π *TIMESTAMPS*
00:00 Intro 00:19 Unboxing the Makita HR2470FT Rotary hammer 00:34 Parts overview 00:57 Review of the rotary hammer 02:13 Demonstration 03:24 Pros 03:36 Cons 03:43 Outro
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!DIY 3-Roll Outfeed Stand β Perfect for Small WorkshopsAsh Stag Woodworking2020-06-01 | Struggling to support long boards or heavy panels? This fully adjustable 3-roll outfeed stand makes cutting, planing, or feeding materials safer and smoother β without needing a commercial roller stand.
β Adjustable to match any machine height β 3 smooth steel rollers for easy material flow β Foldable, sturdy, and space-saving β Works with table saws, planers, and more
β οΈ *PLEASE NOTE*: *Free plans for this project are no longer available* due to data loss. Thank you for your understanding.β οΈ
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!5 Must-Have Woodworking Jigs You Can Build EasilyAsh Stag Woodworking2020-05-11 | Want to upgrade your woodworking, without buying expensive tools? These 5 simple woodworking jigs are made from scrap wood, but theyβll help you cut straighter, build faster, and work safer every day in your shop.
β Built entirely from leftover wood β Beginner-friendly and workshop-tested β Ideal for accurate cuts, safer work, and repeatable results
If youβre not using these yet, youβre missing out.
β οΈ *PLEASE NOTE*: *Free plans for this project are no longer available* due to data loss. Thank you for your understanding.β οΈ
π *TIMESTAMPS*
00:00 Overview β The 5 jigs I will make in this video 00:23 Jig #1 02:36 Jig #2 05:05 Jig #3 06:50 Jig #4 08:28 Jig #5
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!Dead simple THIN STRIP JIG for the TABLE SAW | Precise and repeatableAsh Stag Woodworking2020-02-24 | Need perfect, repeatable thin strips from your table saw? This simple DIY jig makes it safe, easy, and insanely consistent, no math, no measuring between cuts, just slide, cut, repeat.
β Built from scrap wood in under an hour β Works on any standard table saw β Perfect for edge banding, fine inlays, and model parts β No recalibration between cuts
π *TIMESTAMPS*
00:00 Thin strips made with this jig 00:12 Making the thin strip jig for the table saw 02:58 Demonstration how to cut thin strips
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!Frustrated about slipping workpieces? DIY bench dog clampsAsh Stag Woodworking2020-02-03 | Tired of workpieces sliding around your bench? These DIY bench dog clamps hold your projects rock-solid, without vises, expensive track clamps, or complicated setups. If youβve got 20mm or ΒΎ" dog holes, this solution is for you.
β Strong, adjustable, and easy to build β Perfect for sanding, planing, routing and more β Works on MFT benches or homemade tops β Made entirely from scrap wood + basic hardware
No more chasing your workpiece. Just clamp and go.
β οΈ *PLEASE NOTE: Free plans for this project are no longer available* due to data loss. Thank you for your understanding.β οΈ
π *TIMESTAMPS*
00:00 Why you'll need to make this clamps 00:15 Homemade round wood 02:00 Making the base of the bench dogs 02:34 Assembling the bench dogs 03:00 Making the clamps 04:29 Finish 05:10 Demonstration
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!Makita MLT100 Fence Upgrade: Better Accuracy, Stronger BuildAsh Stag Woodworking2019-12-30 | Frustrated with your table sawβs wobbly fence? I was too, especially on my Makita MLT100, until I built this solid, adjustable upgrade. No more guesswork, misalignment, or unreliable locks. Just straight, confident cuts every time.
β Rock-solid locking and smooth adjustments β Built with simple tools and hardware β Works on the Makita MLT100 and other budget saws β Bonus: includes push stick and feather board upgrades
β οΈ *PLEASE NOTE: Free plans for this project are no longer available* due to data loss. Thank you for your understanding.β οΈ
π *TIMESTAMPS*
00:00 The table saw fence upgrades made in this video 00:19 Installing t-Tracks 02:02 Making a better clamping system 03:23 Push stick organizer 05:22 Feather board update
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!How I Move Full Plywood Sheets Alone (Simple Jig!)Ash Stag Woodworking2019-12-16 | Struggling to lift full plywood sheets on your own? This DIY jig makes solo sheet handling safe, simple, and surprisingly smooth. Whether you're cutting on the table saw or just moving panels around, it takes the strain off your back β and your patience.
β Built from scrap wood β Works for lifting, guiding, and loading β Compact, sturdy, and easy to store β Ideal for solo builders and small shops
β οΈ *PLEASE NOTE: Free plans for this project are no longer available* due to data loss. Thank you for your understanding.β οΈ
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!3 Miter saw improvements I should have done beforeAsh Stag Woodworking2019-11-18 | Frustrated with your miter sawβs accuracy? I was too, until I made these 3 upgrades. They're fast, cheap, and they turned my basic saw into a tool I actually enjoy using.
β Better cuts, every time β Safer and more consistent setup β Works with any entry-level miter saw β Perfect for tight spaces or mobile setups
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!How to Make a Fingerboard for Your Table SawAsh Stag Woodworking2019-05-13 | Want cleaner cuts and safer rips on your table saw? This simple DIY featherboard might be the smartest jig you havenβt built yet.
β Keeps wood tight to the fence β Cuts down on kickback β Easy to build from scrap β Works with most fences and miter slots
Itβs the kind of jig that makes you wonder why you didnβt build it sooner.
β οΈ *PLEASE NOTE: Free plans for this project are no longer available* due to data loss. Thank you for your understanding.β οΈ
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!How I Upgraded My Makita MLT100 Fence for Better AccuracyAsh Stag Woodworking2019-04-22 | Tired of fighting with your MLT100βs flimsy fence? Youβre not the only one, but you can fix it.
In this video, I show you how I upgraded the stock Makita MLT100 fence to make it accurate, solid, and actually pleasant to use.
β No more flex or misalignment β Simple, budget-friendly build β A real confidence boost for safer cuts
If your saw deserves better, this might be your answer.
β οΈ *PLEASE NOTE: Free plans for this project are no longer available* due to data loss. Thank you for your understanding.β οΈ
π *TIMESTAMPS*
00:00 Why you should make this fence too 00:59 Preparations 01:40 Assembling the fence upgrade 02:25 Making a clamping system 03:00 Demonstration
ποΈ *BUILD YOUR WORKSHOP WITH ME*
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!Should You Buy the Makita MLT100? Full Review + Bonus BuildAsh Stag Woodworking2019-04-08 | π This saw is no longer for sale, but hereβs the one Iβd buy today (and actually prefer): amzn.to/3SYAs7m
The Makita MLT100 may no longer be available, but hereβs what really matters: does it still work? Iβve used mine for years, in this honest, no-spons video I share what still shines and what still falters.
β Real-world performance after long-term use β Clear pros & cons β no marketing fluff β Bonus: a mobile cart upgrade perfect for small shops
If youβre shopping for a compact table saw, donβt click blindly, start here.
Ash Stag Woodworking is all about helping you build a dream workshop in any space. Follow my full journey and build yours step by step. π Start here: ashstagwoodworking.com/set-up-a-woodworking-shop
π *JOIN ASH STAG+*
Become a member and get: β 50% off paid plans β Exclusive video previews β Members-only blog content β Free eBooks and behind-the-scenes perks π Explore Ash Stag+: ashstagwoodworking.com/membership
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesnβt cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!