RCD Testing Rig Overview - Pulsed DC on Type AC RCD Fails to Trip @jwflame
RCD Testing Rig Overview - Pulsed DC on Type AC RCD Fails to Trip  @jwflame
Uploaded July 2019 | Updated November 2026, 2 hours ago
Overview of a testing arrangement and some quick tests to demonstrate the effect of pulsed DC on a type AC RCD.
The black box is used to create a fault to earth, equivalent to the insulation in the heater being defective. Fault current shown on the multimeter in mA.
This test places a single diode in series with the heater, effectively running it on half power on pulses of DC at 50Hz. This arrangement was commonly used in heaters to provide a full/half power option with a single switch.

► Support this channel:
Patreon: patreon.com/jwflame
PayPal Donations: xo4.uk/?PPP

► Social Media:
Twitter: twitter.com/jwflame
Facebook: facebook.com/jwflame
Instagram: instagram.com/jwflame

► Contact info, sending stuff in: etc.:
xo4.uk/?YTT

► Website - More on this video and many other subjects
Website: flameport.com
RCD Testing Rig Overview - Pulsed DC on Type AC RCD Fails to TripThe Switch of MysteryFake Overheating 13 amp Star Fuses BS1362 ?Webinar Part 2: BS7671 Amendment 2 Draft for Public CommentFake Fuses and FlexDiverted Neutral Current - 3 Phase into Single Phase, Open CNE Detection, 400V when things go wrongEconomy 7 and Horstmann BX2000Earth Electrodes - 3 Wire Testing Example (Part 3)Polythene Cable, Twin No CPC, 1960s. Compared to  Modern PVCLead Covered CableDriving Electric Vehicles - Not much different to any other car or vanBS7671 18th Edition Amendment 2 Part 6
John Ward (jwflame) |

RCD Testing Rig Overview - Pulsed DC on Type AC RCD Fails to Trip

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER