ExplainingComputers | Raspberry Pi Pico W: Wireless Weather Station @ExplainingComputers | Uploaded August 2022 | Updated October 2024, 6 days ago.
Raspberry Pi Pico W microcontroller review, plus tutorial connecting the board to a BME280 sensor module to create a wireless weather station that transmits temperature, pressure and humidity readings to a web browser.
On this web page you can find the wiring diagram and a link to the final code:
explainingcomputers.com/pi_pico_w_weather.html
The excellent Pi Pico W "getting started" instructions from the Raspberry Pi Foundation are here:
projects.raspberrypi.org/en/projects/get-started-pico-w
The page with links to download the MicroPython UF2 file is here:
raspberrypi.com/documentation/microcontrollers/micropython.html
The Pimoroni BME280 sensor I used in the video is available directly from Pimoroni, or on Amazon.co.uk here: amzn.to/3Q18Rjy A compatible board is available on Amazon.com here: amzn.to/3PXnF1q Note that these are affiliate links, and that as an Amazon Associate I earn a commission from any qualifying purchases you may make.
If you like this video, you may also be interested in my other Pi Pico videos, including:
Raspberry Pi Pico W: WiFi Controlled Robot:
youtube.com/watch?v=iTo4Qh2R6m4
Raspberry Pi Pico: Inputs & Servos:
youtube.com/watch?v=TDj2kcSA-68
PicoMite: Running BASIC on a Raspberry Pi Pico:
youtube.com/watch?v=Cxmjy1nz6MM
IN CASE OF DIFFICULTIES:
If during your experimentation you end up with a Pi Pico W that executes a program that you cannot interrupt by pressing Ctrl-C or Ctrl-F2 in Thonny, you can return the board to its factory state by holding down the boot select switch, connecting to a PC, and copying over a special UF2 file to reset the flash. You can find a link to this UF2 file at the bottom of this page:
raspberrypi.com/documentation/microcontrollers/raspberry-pi-pico.html
Note that after execution you will have to reinstall MicroPython and any required libraries, such as the one for the BME280. All programs will also be erased! Hence, during program development, it is wise to save a copy to both the Pico W and to the PC you are working on.
For additional ExplainingComputers videos and other content, you can become a channel member here:
youtube.com/channel/UCbiGcwDWZjz05njNPrJU7jA/join
More videos on computing and related topics can be found at youtube.com/explainingcomputers
You may also like my ExplainingTheFuture channel at: youtube.com/explainingthefuture
Chapters:
00:44 Pico + Wireless
02:37 MicroPython & Thonny
06:23 BME280 (Sensor)
08:13 Reading the Sensor
11:26 Final Code
15:13 Remote Test
16:23 Wrap
#RaspberryPicoW #PicoW #BME280 #ExplainingComputers
Raspberry Pi Pico W microcontroller review, plus tutorial connecting the board to a BME280 sensor module to create a wireless weather station that transmits temperature, pressure and humidity readings to a web browser.
On this web page you can find the wiring diagram and a link to the final code:
explainingcomputers.com/pi_pico_w_weather.html
The excellent Pi Pico W "getting started" instructions from the Raspberry Pi Foundation are here:
projects.raspberrypi.org/en/projects/get-started-pico-w
The page with links to download the MicroPython UF2 file is here:
raspberrypi.com/documentation/microcontrollers/micropython.html
The Pimoroni BME280 sensor I used in the video is available directly from Pimoroni, or on Amazon.co.uk here: amzn.to/3Q18Rjy A compatible board is available on Amazon.com here: amzn.to/3PXnF1q Note that these are affiliate links, and that as an Amazon Associate I earn a commission from any qualifying purchases you may make.
If you like this video, you may also be interested in my other Pi Pico videos, including:
Raspberry Pi Pico W: WiFi Controlled Robot:
youtube.com/watch?v=iTo4Qh2R6m4
Raspberry Pi Pico: Inputs & Servos:
youtube.com/watch?v=TDj2kcSA-68
PicoMite: Running BASIC on a Raspberry Pi Pico:
youtube.com/watch?v=Cxmjy1nz6MM
IN CASE OF DIFFICULTIES:
If during your experimentation you end up with a Pi Pico W that executes a program that you cannot interrupt by pressing Ctrl-C or Ctrl-F2 in Thonny, you can return the board to its factory state by holding down the boot select switch, connecting to a PC, and copying over a special UF2 file to reset the flash. You can find a link to this UF2 file at the bottom of this page:
raspberrypi.com/documentation/microcontrollers/raspberry-pi-pico.html
Note that after execution you will have to reinstall MicroPython and any required libraries, such as the one for the BME280. All programs will also be erased! Hence, during program development, it is wise to save a copy to both the Pico W and to the PC you are working on.
For additional ExplainingComputers videos and other content, you can become a channel member here:
youtube.com/channel/UCbiGcwDWZjz05njNPrJU7jA/join
More videos on computing and related topics can be found at youtube.com/explainingcomputers
You may also like my ExplainingTheFuture channel at: youtube.com/explainingthefuture
Chapters:
00:44 Pico + Wireless
02:37 MicroPython & Thonny
06:23 BME280 (Sensor)
08:13 Reading the Sensor
11:26 Final Code
15:13 Remote Test
16:23 Wrap
#RaspberryPicoW #PicoW #BME280 #ExplainingComputers
