Uploaded September 2017 | Updated September 2026, 2 weeks ago

---

** NOTE: I have another video, , that shows you how to remove the PB circuit board and replace it with a RPi entirely if you don't want to have both installed. **

Raspberry Pi inside only
youtu.be/cFY26xVpV38

Raspberry Pi & Pandora's Box inside

How to install a Raspberry Pi inside your Pandora's Box 4s / 4s+/ 4x arcade console, keeping the PB and RPi and configuring it with a power button as well as making the Pandora's box controls show up as 2 separate gamepads in Recalbox.

If you have the exact same PB arcade system as mine, you can just add this to your cmdline.txt, usbhid.quirks=0x16c0:0x05e0:0x040

If you have issues editing the cmdline.txt file, try this:

- Connect with SSH
- Remount partition on read-write
Command: mount -o remount, rw /boot
- Use nano to edit the file located at /boot/cmdline.txt
Command: nano /boot/config.txt

Recalbox OS
github.com/recalbox/recalbox-os/releases

Pandora's Box Arcade Consoles
bit.ly/bgarcadegames

---------------------------

Raspberry Pi 3
amzn.to/2wMfCiX

HDMI/USB Mount Cable
amzn.to/2vlKveo

USB/3.5mm Mount cable
amzn.to/2iKTv71

USB OTG cable
amzn.to/2vIz5gL

USB A male to male (short)
amzn.to/2gs69ac

USB A male to male (long)
amzn.to/2vJcbpw

USB power adapter
amzn.to/2wpX1s4