Uploaded February 2022 | Updated November 2026, 3 hours ago
We got this Sachs Wankel KM24 Rotary engine from eBay a couple years ago and we're finally ready to put it to good use! These were originally used on the 1974 Arctic Cat Lynx 295 snowmobiles and it's horsepower numbers are in the mid 20's. We picked up a 1980's Suzuki LT230 Quadsport frame to complete our trifecta of small rotary engine builds. (This engine is pretty similar to the one on our shifter kart) We weren't able to get it running because of pitting and compression leakage, but we will use what we learned in past rotary builds to get this thing back in working order. Thanks for watching!
Build Break Repeat is Proudly Sponsored by GoPowerSports
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only**
CHECK OUT OUR INSTAGRAM! instagram.com/build.break.repeat?igshid=ulwwhmio96an
LINKS TO OUR NEW TOOLS AND EQUIPMENT: https://linktr.ee/BuildBreakRepeatChannel (Amazon Affiliate Links, if you buy something using our links it will help the channel!)
--------------TOOLS -------------
Tools we use and have received from sponsors:
Texas Metalworks 40x80 Welding Table
texasmetalworks.com/product/fully-fabricated-welding-table
RogueFab Tubing Notcher
roguefab.com/product/versanotcher-universal-tubing-notcher
Pro-tools Tubing Bender
pro-tools.com/collections/tube-and-pipe-benders
Optrel Crystal 2.0 Welding Mask
usa.optrel.com/en/eye_protection_helmets/products/show/crystal20
Optrel Grinding Mask
usa.optrel.com/en/products/augenschutz/helme-zum-schleifen-schneiden/products/show/clearmaxx
----------MUSIC ---------
Intro Song - Jimmi by Andrew Applepie
youtube.com/watch?v=l1zHz8pYfyQ&ab_channel=AndrewApplepie
---------MERCH----------
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
teespring.com/stores/build-break-repeat
Time Stamps:
00:00 - 01:40 : Intro
01:40 - 06:22 : Adapting the starter
06:22 - 10:48 : Trying to run the engine
10:48 - 14:04 : Diagnosing the problems
14:04 - 17:55 : Tearing apart the engine
We got this Sachs Wankel KM24 Rotary engine from eBay a couple years ago and we're finally ready to put it to good use! These were originally used on the 1974 Arctic Cat Lynx 295 snowmobiles and it's horsepower numbers are in the mid 20's. We picked up a 1980's Suzuki LT230 Quadsport frame to complete our trifecta of small rotary engine builds. (This engine is pretty similar to the one on our shifter kart) We weren't able to get it running because of pitting and compression leakage, but we will use what we learned in past rotary builds to get this thing back in working order. Thanks for watching!
Build Break Repeat is Proudly Sponsored by GoPowerSports
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only**
CHECK OUT OUR INSTAGRAM! instagram.com/build.break.repeat?igshid=ulwwhmio96an
LINKS TO OUR NEW TOOLS AND EQUIPMENT: https://linktr.ee/BuildBreakRepeatChannel (Amazon Affiliate Links, if you buy something using our links it will help the channel!)
--------------TOOLS -------------
Tools we use and have received from sponsors:
Texas Metalworks 40x80 Welding Table
texasmetalworks.com/product/fully-fabricated-welding-table
RogueFab Tubing Notcher
roguefab.com/product/versanotcher-universal-tubing-notcher
Pro-tools Tubing Bender
pro-tools.com/collections/tube-and-pipe-benders
Optrel Crystal 2.0 Welding Mask
usa.optrel.com/en/eye_protection_helmets/products/show/crystal20
Optrel Grinding Mask
usa.optrel.com/en/products/augenschutz/helme-zum-schleifen-schneiden/products/show/clearmaxx
----------MUSIC ---------
Intro Song - Jimmi by Andrew Applepie
youtube.com/watch?v=l1zHz8pYfyQ&ab_channel=AndrewApplepie
---------MERCH----------
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
teespring.com/stores/build-break-repeat
Time Stamps:
00:00 - 01:40 : Intro
01:40 - 06:22 : Adapting the starter
06:22 - 10:48 : Trying to run the engine
10:48 - 14:04 : Diagnosing the problems
14:04 - 17:55 : Tearing apart the engine



