Uploaded April 2018 | Updated November 2026, 5 days ago
I converted my Quest velomobile to tubeless. It's a lot of work because I had to took all the wheels off. I used 3 days to this project, but that's just because I had to film everything and then I also did other maintenance things. But it's good to reserve enough time for this kind of project.
First set of tyres I left lying on their side for the night. But the second set I didn't. Because they aren't tubeless ready tyres, they are now leaking air a little bit from the tyre side walls. So if you are doing this conversion, make sure you left the tyres lying on their side for a while so the sealant can block all the small air leaks from the side walls.
Why tubeless? Read more in my blog: saukki.com/2018/04/miksi-tubeless-why-tubeless
My setup:
Front tires: Schwalbe Shredda 40-406
Rear tyre: Schwalbe Marathon Almotion 55-559
Stan's NoTubes tire sealant
Quaxar universal tubeless valves
Quaxar tubeless rim tape 25 mm
Stan's NoTubes tire sealant injector
Rear axle modification:
I was trying to solve the wobbly rear wheel problem. I mounted longer spacer between the swingarm and rear casette: youtu.be/a45HzAZrSsc
But that didn't solve the problem: youtu.be/YYMRts14e8M
More velomobile maintenance videos: youtube.com/playlist?list=PLZWUH_85V1ZMIxVvC1XDHCan7CphJ3Z25
—————————————————————————————————
Thanks for watching! Please subscribe: youtube.com/saukki86?sub_confirmation=1
Check out my new webshop with velomobile & recumbent T-Shirts & more: saukki.com/shop
My blog: saukki.com
Twitter: twitter.com/saukkico
Instagram: instagram.com/saukkico My up to date social media links: links.saukki.com
I converted my Quest velomobile to tubeless. It's a lot of work because I had to took all the wheels off. I used 3 days to this project, but that's just because I had to film everything and then I also did other maintenance things. But it's good to reserve enough time for this kind of project.
First set of tyres I left lying on their side for the night. But the second set I didn't. Because they aren't tubeless ready tyres, they are now leaking air a little bit from the tyre side walls. So if you are doing this conversion, make sure you left the tyres lying on their side for a while so the sealant can block all the small air leaks from the side walls.
Why tubeless? Read more in my blog: saukki.com/2018/04/miksi-tubeless-why-tubeless
My setup:
Front tires: Schwalbe Shredda 40-406
Rear tyre: Schwalbe Marathon Almotion 55-559
Stan's NoTubes tire sealant
Quaxar universal tubeless valves
Quaxar tubeless rim tape 25 mm
Stan's NoTubes tire sealant injector
Rear axle modification:
I was trying to solve the wobbly rear wheel problem. I mounted longer spacer between the swingarm and rear casette: youtu.be/a45HzAZrSsc
But that didn't solve the problem: youtu.be/YYMRts14e8M
More velomobile maintenance videos: youtube.com/playlist?list=PLZWUH_85V1ZMIxVvC1XDHCan7CphJ3Z25
—————————————————————————————————
Thanks for watching! Please subscribe: youtube.com/saukki86?sub_confirmation=1
Check out my new webshop with velomobile & recumbent T-Shirts & more: saukki.com/shop
My blog: saukki.com
Twitter: twitter.com/saukkico
Instagram: instagram.com/saukkico My up to date social media links: links.saukki.com










