Uploaded October 2023 | Updated November 2026, 3 days ago
In this video I'll be going off the cuff with honest impressions and feedback trying to use the quest 3 for a PCVR headset- as someone with other headsets available, there are many comparison points I can make in what I feel makes the better PCVR experience for me.
The quest 3 is just far too many trade offs for me to consider this at all for a pcvr headset, I can't even begin to use higher virtual desktop settings like 120hz with hevc 10 bit godlike on any bitrate or game, can't use the bumped up 200mb bitrate for 90hz hevc 10 bit godlike and obviously can't use the AV1 codec on my 3080ti.
so over a pico 4, there really isn't much benefits offered given I'm held back by both a network setup that is absolutely rock solid for other headsets and a gpu that was incredibly expensive not too long ago.
to make the most out of the quest 3, a ''cheap'' headset, its now requiring the best part of £1500 for a 4090 and new WIFI 6 setup.
all to be able to push those visuals just to rival a much lower resolution headset on display port with every increase in vd settings increasing latency that you just don't get on display port and at the end of a huge expense, still don't completely eliminate compression.
not exactly cheap anymore and the worst part is this quest 3 just isn't worth that expense at all in my opinion.
fov may seem big on paper, it may have great lenses and great edge to edge clarity but all get quite literally, overshadowed by the low overlap and the lenses tailing off brightness to the outer edges.
to look around with my eyes, this is not a good headset for me, I want to look to the edges and I can't really do that clearly due to the binocular overlap.
this combination of low overlap ( eye strain and loss of depth perception ) plus the streaming compression on PC causing its own loss of depth especially in distance, just makes this uncomfortable visually for me.
that's not even getting into actual headset comfort, its a heavy headset and can only be balanced by making it even heavier at the rear, this for me is just too much to go back to having tried Pico standalone headsets.
but worst of all, is the now even greater sacrifice made to tracking volume above your head- this may very well be an uncommon situation, but in VR, things need to at least try and be natural- being thrown around the moment you hang on something is incredibly immersion breaking and is one more step backwards for me personally having started with a tracking system that just doesn't break.
final nail in this coffin is I have yet again received a bad headset, this time with 'mura', a dark texture that follows wherever you look, this is on the panel itself and is something that was not present in my first headset, which had tracking problems.
adding to the pain is after just one day, both thumbstick in these controllers have started to fail, becoming loose and rattling despite barely being touched at all- I have never broke vr controllers and certainly didn't do anything to cause this myself.
so yet again, I'm going to have to arrange a return and wait for a replacement headset- I purchased release day and have so far had less than a total of 24hrs use over 2 weeks with 2 headsets.
for me, this headset is not one I plan to use a lot, merely wanting out of interest for what developers do with it, not the hardware of the headset itself.
so that's it, my review and quite possibly last video on quest 3 until something cool happens or I find something worth sharing.
In this video I'll be going off the cuff with honest impressions and feedback trying to use the quest 3 for a PCVR headset- as someone with other headsets available, there are many comparison points I can make in what I feel makes the better PCVR experience for me.
The quest 3 is just far too many trade offs for me to consider this at all for a pcvr headset, I can't even begin to use higher virtual desktop settings like 120hz with hevc 10 bit godlike on any bitrate or game, can't use the bumped up 200mb bitrate for 90hz hevc 10 bit godlike and obviously can't use the AV1 codec on my 3080ti.
so over a pico 4, there really isn't much benefits offered given I'm held back by both a network setup that is absolutely rock solid for other headsets and a gpu that was incredibly expensive not too long ago.
to make the most out of the quest 3, a ''cheap'' headset, its now requiring the best part of £1500 for a 4090 and new WIFI 6 setup.
all to be able to push those visuals just to rival a much lower resolution headset on display port with every increase in vd settings increasing latency that you just don't get on display port and at the end of a huge expense, still don't completely eliminate compression.
not exactly cheap anymore and the worst part is this quest 3 just isn't worth that expense at all in my opinion.
fov may seem big on paper, it may have great lenses and great edge to edge clarity but all get quite literally, overshadowed by the low overlap and the lenses tailing off brightness to the outer edges.
to look around with my eyes, this is not a good headset for me, I want to look to the edges and I can't really do that clearly due to the binocular overlap.
this combination of low overlap ( eye strain and loss of depth perception ) plus the streaming compression on PC causing its own loss of depth especially in distance, just makes this uncomfortable visually for me.
that's not even getting into actual headset comfort, its a heavy headset and can only be balanced by making it even heavier at the rear, this for me is just too much to go back to having tried Pico standalone headsets.
but worst of all, is the now even greater sacrifice made to tracking volume above your head- this may very well be an uncommon situation, but in VR, things need to at least try and be natural- being thrown around the moment you hang on something is incredibly immersion breaking and is one more step backwards for me personally having started with a tracking system that just doesn't break.
final nail in this coffin is I have yet again received a bad headset, this time with 'mura', a dark texture that follows wherever you look, this is on the panel itself and is something that was not present in my first headset, which had tracking problems.
adding to the pain is after just one day, both thumbstick in these controllers have started to fail, becoming loose and rattling despite barely being touched at all- I have never broke vr controllers and certainly didn't do anything to cause this myself.
so yet again, I'm going to have to arrange a return and wait for a replacement headset- I purchased release day and have so far had less than a total of 24hrs use over 2 weeks with 2 headsets.
for me, this headset is not one I plan to use a lot, merely wanting out of interest for what developers do with it, not the hardware of the headset itself.
so that's it, my review and quite possibly last video on quest 3 until something cool happens or I find something worth sharing.










