Maple Bookshelves 3B downtoearthwoodworks 2016-11-13 | In Part 3A Steve has to get a little creative to cut the huge side panels and shelves to size in his small shop. Hints for making sure everything is exactly the right size and the final preparations for setting up to make the dados.Part 3B shows the dado set-up, using the Festool OF1 1400 Router and Guide Rail. A small snag sets the project back a day, while Steve waits on a new router bit... It's happened to everyone, right?To see Part 1, click here:youtu.be/iF25QyrtQJkTo see Part 2, click here:youtu.be/CFi8OH63KoYTo see Part 3A, click here:youtu.be/OlBBdjUeVUwMusic..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
For The Birds Part 2 downtoearthwoodworks 2019-06-29 | Elegant bird feeder made from scrap... or buy a couple of 1 X 4 X 8' boards if you want... a few supplies from the big box store and you are ready to go. I spent less than $10 and have since seen bird feeders this size for sale at stores for $80 or more! And they are not nearly as nice!Mitered corners on the base, a little angled detail on the side pieces, and acrylic panels to hold the seed and let you see when the feeder needs to be refilled are design highlights. I made mine out of cedar because it is naturally bug and decay resistant and it weathers to a nice grayish brown color over time, but you can make this bird feeder out of any kind of material... just don't use "treated" lumber... it's not good for the birds.In part one we lay the groundwork by building the base and gluing up the panels for the sides. In part two, we build the roof, cut the acrylic panels, and make the hanging system. This design lends itself well to making multiple copies, so build 2, or 3, or more. This bird feeder will be a joy in your garden and will make a great gift for every bird-lover on your list.Video...Written and performed by Steven JohnsonMusic...“Get Busy,” "Welcome To The Show," "Feelin Good," Hackbeat,” “The Show Must Be Go,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
For The Birds Part 1 downtoearthwoodworks 2019-06-22 | Elegant bird feeder made from scrap... or buy a couple of 1 X 4 X 8' boards if you want... a few supplies from the big box store and you are ready to go. I spent less than $10 and have since seen bird feeders this size for sale at stores for $80 or more! And they are not nearly as nice!Mitered corners on the base, a little angled detail on the side pieces, and acrylic panels to hold the seed and let you see when the feeder needs to be refilled are design highlights. I made mine out of cedar because it is naturally bug and decay resistant and it weathers to a nice grayish brown color over time, but you can make this bird feeder out of any kind of material... just don't use "treated" lumber... it's not good for the birds.In part one we lay the groundwork by building the base and gluing up the panels for the sides. In part two, we build the roof, cut the acrylic panels, and make the hanging system. This design lends itself well to making multiple copies, so build 2, or 3, or more. This bird feeder will be a joy in your garden and will make a great gift for every bird-lover on your list.Video...Written and performed by Steven JohnsonMusic...“Get Busy,” "Welcome To The Show," "Feelin Good," Hackbeat,” “The Show Must Be Go,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Mobile Raised Container Planter Part 4 downtoearthwoodworks 2019-06-15 | The Mobile Raised Container Planter is easy to build and will accommodate flowers, vegetables, and more. It's raised up off the ground, so no more back-breaking gardening. Keeps the rabbits out, too! It's mobile, so roll it out in the Spring and easily stow it away in the Fall. It's sized to grow vegetables for 2 to 4 people and can be placed almost anywhere... as long as there is sunshine. Container planting is environmentally sound and sustainable.This is a four-part series. In Part 4, the conclusion, Steve finishes up the ends of the unit, adds trim pieces, drills a couple of drainage holes, permanently attaches the legs to the mobile base, and shows how to add a couple of surprise finishing touches that you won't want to miss!Be sure to subscribe! And you are also invited to visit the downtoearthwoodworking.com website to see more projects, read articles about woodworking, download drawings and construction tips for numerous projects, and lot's more --- all for free!Music...“Get Busy,” "Welcome To The Show," "Feelin Good," Hackbeat,” “The Show Must Be Go,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Mobile Raised Container Planter BONUS! downtoearthwoodworks 2019-06-15 | Here is a little bonus content for everyone who would like to see the completely finished Mobile Raised Container Planter in a nice sunny spot on the back of my property.Be sure to subscribe! And you are also invited to visit the downtoearthwoodworking.com website to see more projects, read articles about woodworking, download drawings and construction tips for numerous projects, and lot's more --- all for free!Music...“Get Busy,” "Welcome To The Show," "Feelin Good," Hackbeat,” “The Show Must Be Go,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Mobile Raised Container Planter Part 3 downtoearthwoodworks 2019-06-09 | The Mobile Raised Container Planter is easy to build and will accommodate flowers, vegetables, and more. It's raised up off the ground, so no more back-breaking gardening. Keeps the rabbits out, too! It's mobile, so roll it out in the Spring and easily stow it away in the Fall. It's sized to grow vegetables for 2 to 4 people and can be placed almost anywhere... as long as there is sunshine. Container planting is environmentally sound and sustainable.This is a four-part series. In Part 3 Steve shares hints and tips for building the angled braces that hold the prime soil containing boards and shows how to get things lined up perfectly.Be sure to subscribe! And you are also invited to visit the downtoearthwoodworking.com website to see more projects, read articles about woodworking, download drawings and construction tips for numerous projects, and lot's more --- all for free!Music...“Get Busy,” "Welcome To The Show," "Feelin Good," Hackbeat,” “The Show Must Be Go,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Mobile Raised Container Planter Part 2 downtoearthwoodworks 2019-06-01 | The Mobile Raised Container Planter is easy to build and will accommodate flowers, vegetables, and more. It's raised up off the ground, so no more back-breaking gardening. Keeps the rabbits out, too! It's mobile, so roll it out in the Spring and easily stow it away in the Fall. It's sized to grow vegetables for 2 to 4 people and can be placed almost anywhere... as long as there is sunshine. Container planting is environmentally sound and sustainable.This is a four-part series. In Part 2 Steve makes the legs and frame for the container. Some exacting angle work, but Steve makes it easy. Be sure to subscribe! And you are also invited to visit the downtoearthwoodworking.com website to see more projects, read articles about woodworking, download drawings and construction tips for numerous projects, and lot's more --- all for free!Music...“Get Busy,” "Welcome To The Show," "Feelin Good," Hackbeat,” “The Show Must Be Go,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Mobile Raised Container Planter Part 1 downtoearthwoodworks 2019-05-25 | After a little time off, Steve is back with a project that can definitely make your gardening chores easier and more productive. His new Mobile Raised Container Planter is easy to build and will accommodate flowers, vegetables, and more. It's raised up off the ground, so no more back-breaking gardening. Keeps the rabbits out, too! It's mobile, so roll it out in the Spring and easily stow it away in the Fall. It's sized to grow vegetables for 2 to 4 people and can be placed almost anywhere... as long as there is sunshine. Container planting is environmentally sound and sustainable.Learn tricks for quickly producing dados and working with angles... there's even a chance to learn to sew (or get someone you know to sew for you).This is a four-part series. In Part 1 Steve builds the mobile base for the container planter by forming half-lap joints and using the mounting plates on heavy-duty wheels to join the corners. Learn to cut dados in a precise and simple way on the table saw.Be sure to subscribe! And you are also invited to visit the downtoearthwoodworking.com website to see more projects, read articles about woodworking, download drawings and construction tips for numerous projects, and lot's more --- all for free!Music...“Get Busy,” "Welcome To The Show," "Feelin Good," Hackbeat,” “The Show Must Be Go,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Cedar Garden Potting Bench Part 5 downtoearthwoodworks 2018-10-15 | A Potting Bench is a great place to work and an excellent way to keep all your gardening supplies neat and organized. In this series Steve uses construction and trim grade cedar lumber to build a highly functional and beautiful outdoor garden potting bench.Part 5 is the wrap-up to this series. In this video Steve constructs the lower storage shelf and adds some nice decorative touches to the potting bench.Music..."Welcome To The Show," "Feelin Good," Hackbeat,” “The Show Must Be Go,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Cedar Garden Potting Bench Part 4 downtoearthwoodworks 2018-09-09 | A Potting Bench is a great place to work and an excellent way to keep all your gardening supplies neat and organized. In this series Steve uses construction and trim grade cedar lumber to build a highly functional and beautiful outdoor garden potting bench.In Part 4 the worktops get made, including the tricky slotted worktop or "grate." Also learn a couple of tricks for cutting short small pieces on the miter saw.Music..."Welcome To The Show," "Feelin Good," Hackbeat,” “The Show Must Be Go,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Cedar Garden Potting Bench Part 3 downtoearthwoodworks 2018-08-12 | A Potting Bench is a great place to work and an excellent way to keep all your gardening supplies neat and organized. In this series Steve uses construction and trim grade cedar lumber to build a highly functional and beautiful outdoor garden potting bench.In Part 3 The sub-top assemblies are made with cut-outs to hold the kitty litter box and the plastic trash can... the catch-all for spilled dirt when potting a plant and the container for a supply of potting soil. The garden bench is then ready for work tops and a shelf on the bottom to store supplies.Music..."Welcome To The Show," "Feelin Good," Hackbeat,” “The Show Must Be Go,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Cedar Garden Potting Bench Part 2B downtoearthwoodworks 2018-07-15 | A Potting Bench is a great place to work and an excellent way to keep all your gardening supplies neat and organized. In this series Steve uses construction and trim grade cedar lumber to build a highly functional and beautiful outdoor garden potting bench.In Part 2B the basic garden bench frame is completely assembled and made ready for the tops, sub-tops, and shelves.Music..."Welcome To The Show," "Feelin Good," Hackbeat,” “The Show Must Be Go,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Cedar Garden Potting Bench Part 2A downtoearthwoodworks 2018-07-15 | A Potting Bench is a great place to work and an excellent way to keep all your gardening supplies neat and organized. In this series Steve uses construction and trim grade cedar lumber to build a highly functional and beautiful outdoor garden potting bench.In Part 2A we cut the notches for the frame assembly and assemble the main sub-assemblies for the bench. Screws and glue, and extra care to make sure everything is square is the key here... be sure to find and play Part 2B to see the final frame assembly steps!Click here to see Part 2B:youtube.com/watch?v=32OpJJDnQsU&t=1sMusic..."Welcome To The Show," "Feelin Good," Hackbeat,” “The Show Must Be Go,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Cedar Garden Potting Bench Part 1 downtoearthwoodworks 2018-06-11 | A Potting Bench is a great place to work and an excellent way to keep all your gardening supplies neat and organized. In this series Steve uses construction and trim grade cedar lumber to build a highly functional and beautiful outdoor garden potting bench.In Part 1 design considerations are outlined and the rough lumber is jointed straight, planed smooth, and cut to size for the basic bench framework.Music..."Welcome To The Show," "Feelin Good," Hackbeat,” “The Show Must Be Go,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Under Table Saw Storage Cabinet Part 8 downtoearthwoodworks 2018-05-13 | Underneath your table saw extension table could be wasted space... so why not build a storage cabinet to fit? But just a storage cabinet might not be enough... how about a multi-use cabinet that can also be used as an infeed and outfeed table? Follow along as Steve makes a multi-purpose cabinet to compliment the SawStop Outfeed Table.Part 8 is the final installment of this series. The tops for the cabinet are finished, roller balls added, and the decorative metal plates for the lifting mechanism are attached. And for the first time, I get to try it out!The cabinet makes an awesome infeed table for the tablesaw, and a great outfeed table for the band saw. In addition, with the plain top attached, the cabinet can be used for a variety of purposes around the shop.A couple of drawings and some additional information, including the sources for the hardware used, are all available for download for FREE on my website. Click here to download:http://www.downtoearthwoodworking.com/under-the-tablesaw-storage-infeed-outfeed-cabinetAs always, thanks for watching!Music..."Welcome To The Show," "Feelin Good," Hackbeat,” “The Show Must Be Go,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Under Table Saw Storage Cabinet Part 7 downtoearthwoodworks 2018-04-15 | Underneath your table saw extension table could be wasted space... so why not build a storage cabinet to fit? But just a storage cabinet might not be enough... how about a multi-use cabinet that can also be used as an infeed and outfeed table? Follow along as Steve makes a multi-purpose cabinet to compliment the SawStop Outfeed Table.In Part 7, the mechanism for raising and lowering the tops is assembled and the tops are built. Almost finished. In fact, between now and the next (and last) video in this series, I will put a few coats of finish on.Be sure to watch for Part 8, where we will finish up this project and use it for the first time!Thanks for watching!Music..."Welcome To The Show," "Feelin Good," Hackbeat,” "The Show Must Be Go," & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Under Table Saw Storage Cabinet Part 6 downtoearthwoodworks 2018-03-11 | Underneath your table saw extension table could be wasted space... so why not build a storage cabinet to fit? But just a storage cabinet might not be enough... how about a multi-use cabinet that can also be used as an infeed and outfeed table? Follow along as Steve makes a multi-purpose cabinet to compliment the SawStop Outfeed Table.In Part 6, a demonstration of how a drum sander can make quick work of prepping a face frame, the final cabinet glue-up, the aluminum square stock gets drilled and tapped for the lifting and holding mechanism for the top, and more.Thanks for watching!Music..."Welcome To The Show," "Feelin Good," Hackbeat,” "The Show Must Be Go," & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/b...
Under Table Saw Storage Cabinet Part 5 downtoearthwoodworks 2018-02-11 | Underneath your table saw extension table could be wasted space... so why not build a storage cabinet to fit? But just a storage cabinet might not be enough... how about a multi-use cabinet that can also be used as an infeed and outfeed table? Follow along as Steve makes a multi-purpose cabinet to compliment the SawStop Outfeed Table.In Part 5, Steve locates and cuts the dados for the cabinet wall panels, creates the side panels, glues up the base pieces, designs the face frame, and more. Useful tips and tricks throughout!This project has featured a lot of meticulous fabrication to get the legs "just right," but now things are moving much faster. Thanks for watching!Music..."Welcome To The Show," "Feelin Good," Hackbeat,” "The Show Must Be Go," & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Under Table Saw Storage Cabinet Part 4 downtoearthwoodworks 2018-01-14 | Underneath your table saw extension table could be wasted space... so why not build a storage cabinet to fit? But just a storage cabinet might not be enough... how about a multi-use cabinet that can also be used as an infeed and outfeed table? Follow along as Steve makes a multi-purpose cabinet to compliment the SawStop Outfeed Table.In Part 4, we finally get to glue up these complicated, multi-part legs, and it is fairly difficult. But, by taking it slow and paying attention to a few details, it need not be intimidating. Follow along as Steve takes us meticulously through each step.The end blocks for the bottoms of the legs are cut to size and glued in place, and the legs are finally ready to become a part of this multi-function under-the-table-saw storage cabinet.Music..."Welcome To The Show," "Feelin Good," Hackbeat,” "The Show Must Be Go," & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Under Table Saw Storage Cabinet Part 3 downtoearthwoodworks 2017-12-12 | Underneath your table saw extension table could be wasted space... so why not build a storage cabinet to fit? But just a storage cabinet might not be enough... how about a multi-use cabinet that can also be used as an infeed and outfeed table? Follow along as Steve makes a multi-purpose cabinet to compliment the SawStop Outfeed Table.In Part 3, slots are cut for the tabletop adjustment height system. Slots in plywood are very difficult to cut, but by drilling out most of the waste first at the drill press, then cleaning up the slot with the router table, these slots come out looking pretty good!The last steps before the glue-up includes cutting rabbets for the leg mounting blocks and cutting the channel for the aluminum tube stock to final length.Music..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0
Under Table Saw Storage Cabinet Part 2 downtoearthwoodworks 2017-11-12 | Underneath your table saw extension table could be wasted space... so why not build a storage cabinet to fit? But just a storage cabinet might not be enough... how about a multi-use cabinet that can also be used as an infeed and outfeed table? Follow along as Steve makes a multi-purpose cabinet to compliment the SawStop Outfeed Table.In Part 2, the leg parts preparation continues with cutting and test fitting of some of the critical parts. The internal structure of the legs will allow the top of the table to move up and down and adjust for different heights so the table can be used as a roller stand for other machines around the shop.Music..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0
Under Table Saw Storage Cabinet Part 1 downtoearthwoodworks 2017-10-08 | Underneath your table saw extension table could be wasted space... so why not build a storage cabinet to fit? But just a storage cabinet might not be enough... how about a multi-use cabinet that can also be used as an infeed and outfeed table? Follow along as Steve makes a multi-purpose cabinet to compliment the SawStop Outfeed Table.In Part 1, various design considerations are explored, drawings are reviewed, the hardware is demonstrated, and the Down To Earth Woodworker gets started on making the legs.Music..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Festool CT Sys Backpack Vac Hack downtoearthwoodworks 2017-08-06 | The Festool CT SYS HEPA is an outstanding portable dust extractor, but in just a few minutes you can turn the CT SYS into a wearable backpack vacuum! On the job site or in the woodworking shop, a backpack vacuum is super convenient.Music..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Sliding Bypass Doors Part 5 downtoearthwoodworks 2017-07-16 | Sliding bypass doors are a great choice for places where a swinging, hinged door might take up too much space. In this video series learn how to design sliding bypass doors, choose and use the hardware, and build strong doors with haunched tenon construction that will be beautiful, last for years, match your decor, and slide easily.Part 5 concludes this series with the insertion of the door panels, glue-up, finishing, and installation of the rolling door hardware. The finish is shop-mixed shellac and General Finishes Arm-R-Seal.While building these doors, Steve developed a spreadsheet that will help with the calculation of door height, door width, and rail length. The spreadsheet also includes supplementary instructions for the rolling door hardware. It can be downloaded for FREE by clicking on this link:http://www.downtoearthwoodworking.com/free-products/sliding-bypass-door-tips-calculatorTo see Part 1, click here:youtu.be/YS5yP1L45fkTo see Part 2, click here:youtu.be/KG7g6kJNx8cTo see Part 3, click here:youtu.be/Qa5LRjJBMFATo see Part 4, click here:youtu.be/cEgbETriCD4Music..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Sliding Bypass Doors Part 4 downtoearthwoodworks 2017-06-12 | Sliding bypass doors are a great choice for places where a swinging, hinged door might take up too much space. In this video series learn how to design sliding bypass doors, choose and use the hardware, and build strong doors with haunched tenon construction that will be beautiful, last for years, match your decor, and slide easily.Trim the tenons for a perfect fit in part 4... Shows how to use a shoulder plane, a skew-block plane, and a 1/8" plane float. Any of these tools will do a great job! Also in this video we set up the drill press to drill the 35mmm holes for the roller hardware.To see Part 1, click here:youtu.be/YS5yP1L45fkTo see Part 2, click here:youtu.be/KG7g6kJNx8cTo see Part 3, click here:youtu.be/Qa5LRjJBMFAMusic..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Sliding Bypass Doors Part 3 downtoearthwoodworks 2017-05-21 | Sliding bypass doors are a great choice for places where a swinging, hinged door might take up too much space. In this video series learn how to design sliding bypass doors, choose and use the hardware, and build strong doors with haunched tenon construction that will be beautiful, last for years, match your decor, and slide easily.In Part 3 we make the mortises using a Hollow Chisel Mortising Machine. Learn how to set up the Hollow Chisel Mortiser, sharpen the chisels, and layout the marks to cut beautiful mortises.To see Part 1, click here:youtu.be/YS5yP1L45fkTo see Part 2, click here:youtu.be/KG7g6kJNx8cMusic..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Sliding Bypass Doors Part 2 downtoearthwoodworks 2017-04-09 | Sliding bypass doors are a great choice for places where a swinging, hinged door might take up too much space. In this video series learn how to design sliding bypass doors, choose and use the hardware, and build strong doors with haunched tenon construction that will be beautiful, last for years, match your decor, and slide easily.In Part 2 we cut perfectly centered grooves for the door panel inserts and lay out and form the tenons.To see Part 1, click here:youtu.be/YS5yP1L45fkMusic..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Sliding Bypass Doors Part 1 downtoearthwoodworks 2017-03-12 | Sliding bypass doors are a great choice for places where a swinging, hinged door might take up too much space. In this video series learn how to design sliding bypass doors, choose and use the hardware, and build strong doors that will be beautiful, last for years, match your decor, and slide easily.In Part 1, explore the hardware, see how to determine the necessary dimensions, and how to make the track rails.Music..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Maple Bookshelves 6 downtoearthwoodworks 2017-02-12 | Some reinforcement bracing was added into the base of the bookshelves and the face frame is built in this episode. The face frame is designed to keep the shelves from sagging using a special piece underneath, attached to the face frame.Now if I can figure out how to get this monster bookshelf out of my shop and into my truck...To see Part 1 of the "Big Maple Bookshelves" Project, click here:youtu.be/iF25QyrtQJkTo see Part 2, click here:youtu.be/CFi8OH63KoYTo see Part 3A, click here:youtu.be/OlBBdjUeVUwTo see Part 3B, click here:youtu.be/QK9jRHE2qYgTo see Part 4, click here:youtu.be/To7kKta3QkgTo see Part 5, click here:youtu.be/XAXNfr75Pck"Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Maple Bookshelves 5 downtoearthwoodworks 2017-01-08 | It is time to glue up these monster shelves. In his small shop, Steve has to do a bit of rearranging before the first drop of glue gets spread. At first the glue-up is fairly straight-forward, methodical, and "calm"... then it gets a bit frenzied toward the end!In this video learn how to make custom cauls to aid in a glue-up.If you would like to read a bit more about cauls, how they work, and how to make them, click here:http://www.highlandwoodworking.com/woodworking-tips-1701jan/DTEW/custom-clamping-cauls.htmlAgain in this video there is a reference to the "I-Beam Work Support and Bases" project. If you would like to see that video, click here:youtu.be/C-rfBtZVeC8If you would like to download a free cut list and directions for making the I-Beam Work Supports and Bases, click here:http://www.downtoearthwoodworking.com/i-beam-work-supportsTo see Part 1 of the "Big Maple Bookshelves" Project, click here:youtu.be/iF25QyrtQJkTo see Part 2, click here:youtu.be/CFi8OH63KoYTo see Part 3A, click here:youtu.be/OlBBdjUeVUwTo see Part 3B, click here:youtu.be/QK9jRHE2qYgTo see Part 4, click here:youtu.be/To7kKta3QkgMusic..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Maple Bookshelves 4 downtoearthwoodworks 2016-12-11 | After cutting rabbets (on the table saw) in the side pieces to accommodate the back, Steve begins the task of "mock" assembling the larger of the two bookcase units in order to get dimensions for fabricating the back. It only takes three tries to find a place and a way to get these giant bookcases dry-assembled in his small shop! Fabricating the two-piece back, cutting dados in those pieces, and more are covered in this video.By the way, a number of viewers requested more details about how the Festool OF 1400 Router, Guide Rail, and Guide Stop are set-up to make dados and rabbets. A short video explains it in detail and you can see that by clicking here:youtu.be/GTIGJpdoKJMAlso in this video there is a reference to the "I-Beam Work Support and Bases" project. If you would like to see that video, click here:youtu.be/C-rfBtZVeC8If you would like to download a free cut list and directions for making the I-Beam Work Supports and Bases, click here:http://www.downtoearthwoodworking.com/i-beam-work-supportsTo see Part 1 of the "Big Maple Bookshelves" Project, click here:youtu.be/iF25QyrtQJkTo see Part 2, click here:youtu.be/CFi8OH63KoYTo see Part 3A, click here:youtu.be/OlBBdjUeVUwTo see Part 3B, click here:youtu.be/QK9jRHE2qYgMusic..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Festool Router, Guide Rail & Guide Stop downtoearthwoodworks 2016-12-04 | In this Product Spotlight, Steve takes a look at how to set up the Festool Router, Guide Rail, and Guide Stop to cut rabbets and dados.Music..."How It Begins," "Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Rabbit Air Purifier Product Spotlight downtoearthwoodworks 2016-12-03 | In this "Product Spotlight" video, Steve takes a look at the Rabbit Air Air Purifier, a super "clean air" addition to his workshop... and his house.The Rabbit Air unit automatically adjusts speed, senses contaminants in the air, and can be purchased with specialized filters for pollen, odors, VOCs, and more. Expensive, but a solid investment, and the annual operating cost is lower than many competitive units. Highly recommended.As a side note, I opened up a can of denatured alcohol to mix with some shellac flakes, and within seconds of opening the alcohol, the Rabbit Air unit, thirty feet away, "sensed" the alcohol fumes in the air and ramped up in speed. Pretty amazing!Music..."How It Begins," "Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Maple Bookshelves 3A downtoearthwoodworks 2016-11-13 | In Part 3A Steve has to get a little creative to cut the huge side panels and shelves to size in his small shop. Hints for making sure everything is exactly the right size and the final preparations for setting up to make the dados.Part 3B shows the dado set-up, using the Festool OF1 1400 Router and Guide Rail. A small snag sets the project back a day, while Steve waits on a new router bit... It's happened to everyone, right?To see Part 1, click here:youtu.be/iF25QyrtQJkTo see Part 2, click here:youtu.be/CFi8OH63KoYMusic..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Maple Bookshelves Part 2 downtoearthwoodworks 2016-10-09 | In Part 2 some hints on building big projects in small spaces, the use of a cabinet scraper for glue squeeze-out, and more tips for gluing up large panels.To see Part 1, click here:youtu.be/iF25QyrtQJkMusic..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Maple Bookshelves Part 1 downtoearthwoodworks 2016-09-11 | Bookshelves... large, heavy-duty, made of solid Maple. In this first installment, go through the design considerations, selection and milling of select Maple boards, and edge glue to make perfect larger panels using the Festool Domino machine.
Bath Vanity Part 10 downtoearthwoodworks 2016-06-05 | Basic cabinet construction techniques get enhancements that turn this bath vanity into a beautiful piece of furniture. In this video series, we "plus up" a basic cabinet design with many new design elements and construction techniques.In Part 10 a new Leigh D4R Pro Dovetail Jig is used to make the drawer boxes. See how to set up the Leigh Jig for the first time and how to use it.Please visit my web site at:http://www.downtoearthwoodworking.comTo see Part 1, click here:youtu.be/Nd5Ro2cTuNcTo see Part 2, click here:youtu.be/46xv0aRAOeMTo see Part 3, click here:youtu.be/q18HmsqUStUTo see Part 4, click here:youtu.be/mEVEcSxa89ETo see Part 5, click here:youtu.be/hYZjjAIXHAoTo see Part 6, click here:youtu.be/YvGb7rYvJv4To see Part 7, click here:youtu.be/doaXBxm4Zv4To see Part 8A, click here:youtu.be/o5bogSWMyFk?To see Part 8B, click here:youtu.be/y1VlNvSqD1o?To see Part 9, click here:youtu.be/74-ZR2Juj3oMusic..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Bath Vanity Part 9 downtoearthwoodworks 2016-05-08 | Basic cabinet construction techniques get enhancements that turn this bath vanity into a beautiful piece of furniture. In this video series, we "plus up" a basic cabinet design with many new design elements and construction techniques.In Part 9 see how to glue-up cope & stick doors fast and easy for super strong and square doors. Also review a Hettich jig for fast & accurate cup hole drilling for hinges. Then, see how to mix and apply shellac to add color and "pop" the grain in Maple.Please visit my web site at:http://www.downtoearthwoodworking.comTo see Part 1, click here:youtu.be/Nd5Ro2cTuNcTo see Part 2, click here:youtu.be/46xv0aRAOeMTo see Part 3, click here:youtu.be/q18HmsqUStUTo see Part 4, click here:youtu.be/mEVEcSxa89ETo see Part 5, click here:youtu.be/hYZjjAIXHAoTo see Part 6, click here:youtu.be/YvGb7rYvJv4To see Part 7, click here:youtu.be/doaXBxm4Zv4To see Part 8A, click here:youtu.be/o5bogSWMyFk?To see Part 8B, click here:youtu.be/y1VlNvSqD1o?Music..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Bath Vanity Part 8B downtoearthwoodworks 2016-04-10 | Basic cabinet construction techniques get enhancements that turn this bath vanity into a beautiful piece of furniture. In this video series, we "plus up" a basic cabinet design with many new design elements and construction techniques.In Part 8B, learn how to use a "panel-raising" bit at the router table to make beautiful raised panels for cabinet doors.In Part 8A learn how to make Cope & Stick doors using a router bit set and the router table. All the details, including how to set up the bits easily for a perfect-fitting joint...to go back to Part 8A, click here:youtu.be/o5bogSWMyFk Please visit my web site at:http://www.downtoearthwoodworking.comTo see Part 1, click here:youtu.be/Nd5Ro2cTuNcTo see Part 2, click here:youtu.be/46xv0aRAOeMTo see Part 3, click here:youtu.be/q18HmsqUStUTo see Part 4, click here:youtu.be/mEVEcSxa89ETo see Part 5, click here:youtu.be/hYZjjAIXHAoTo see Part 6, click here:youtu.be/YvGb7rYvJv4To see Part 7, click here:youtu.be/doaXBxm4Zv4Music..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Bath Vanity Part 8A downtoearthwoodworks 2016-04-10 | Basic cabinet construction techniques get enhancements that turn this bath vanity into a beautiful piece of furniture. In this video series, we "plus up" a basic cabinet design with many new design elements and construction techniques.In Part 8A learn how to make Cope & Stick doors using a router bit set and the router table. All the details, including how to set up the bits easily for a perfect-fitting joint.In Part 8B, learn how to use a "panel-raising" bit at the router table to make beautiful raised panels for cabinet doors. Click here... youtu.be/y1VlNvSqD1o...to go to Part 8B. Please visit my web site at:http://www.downtoearthwoodworking.comTo see Part 1, click here:youtu.be/Nd5Ro2cTuNcTo see Part 2, click here:youtu.be/46xv0aRAOeMTo see Part 3, click here:youtu.be/q18HmsqUStUTo see Part 4, click here:youtu.be/mEVEcSxa89ETo see Part 5, click here:youtu.be/hYZjjAIXHAoTo see Part 6, click here:youtu.be/YvGb7rYvJv4To see Part 7, click here:youtu.be/doaXBxm4Zv4Music..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Bath Vanity Part 7 downtoearthwoodworks 2016-03-13 | Basic cabinet construction techniques get enhancements that turn this bath vanity into a beautiful piece of furniture. In this video series, we "plus up" a basic cabinet design with many new design elements and construction techniques.Make stunning book-matched panels! In Part 7 learn how to make simple templates to help visualize the final appearance of sections of wood. Use those same templates to mark out the first oversize cutting locations. Use a hand plane to joint the edges for a perfect, almost invisible seam. Festool Dominos help to line up the edges for the glue-up. Beautiful!Also in this video, an overview and instructions for using the "Door Configurator" --- this is a spreadsheet-based calculator for figuring out parts sizes for cope and stick and raised panel doors. The spreadsheet is available as a FREE DOWNLOAD from my website... click here:http://www.downtoearthwoodworking.com/sources-downloadsBe sure to check out my web site at:http://www.downtoearthwoodworking.comTo see Part 1, click here:youtu.be/Nd5Ro2cTuNcTo see Part 2, click here:youtu.be/46xv0aRAOeMTo see Part 3, click here:youtu.be/q18HmsqUStUTo see Part 4, click here:youtu.be/mEVEcSxa89ETo see Part 5, click here:youtu.be/hYZjjAIXHAoTo see Part 6, click here:youtu.be/YvGb7rYvJv4Music..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Bath Vanity Part 6 downtoearthwoodworks 2016-02-28 | Basic cabinet construction techniques get enhancements that turn this bath vanity into a beautiful piece of furniture. In this video series, we "plus up" a basic cabinet design with many new design elements and construction techniques.Part 6 may wind up being a "stand-alone" video since so many woodworkers have expressed interest in how to best mill rough lumber and get it ready to use in projects. In this video I show the steps I go through to get stable warp-free wood.To see Part 1, click here:youtu.be/Nd5Ro2cTuNcTo see Part 2, click here:youtu.be/46xv0aRAOeMTo see Part 3, click here:youtu.be/q18HmsqUStUTo see Part 4, click here:youtu.be/mEVEcSxa89ETo see Part 5, click here:youtu.be/hYZjjAIXHAoBe sure to check out my web site at:http://www.downtoearthwoodworking.comMusic..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Bath Vanity Part 5 downtoearthwoodworks 2016-02-14 | Basic cabinet construction techniques get enhancements that turn this bath vanity into a beautiful piece of furniture. In this video series, we "plus up" a basic cabinet design with many new design elements and construction techniques.In Part 5 the back frame parts are built and the final cabinet assembly is completed. Next up... milling lumber for doors and drawers.To see Part 1, click here:youtu.be/Nd5Ro2cTuNcTo see Part 2, click here:youtu.be/46xv0aRAOeMTo see Part 3, click here:youtu.be/q18HmsqUStUTo see Part 4, click here:youtu.be/mEVEcSxa89EBe sure to check out my web site at:http://www.downtoearthwoodworking.comMusic..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Bath Vanity Part 4 downtoearthwoodworks 2016-01-31 | Basic cabinet construction techniques get enhancements that turn this bath vanity into a beautiful piece of furniture. In this video series, we "plus up" a basic cabinet design with many new design elements and construction techniques.In Part 4 Steve builds the decorative end panel for the larger base cabinet. The panel is built from maple and walnut using tongue and groove construction techniques to make tight-fitting joints. The router table is used for all joinery. The panel reflects the future look of the face frame, doors and raised panels on the front of the cabinet while still maintaining a flat profile.Precise measurements are the key to successfully building this panel, and the video includes several tips and tricks that can be used in many other projects. Also see some tips for gluing up solid panels!To see Part 1, click here:youtu.be/Nd5Ro2cTuNcTo see Part 2, click here:youtu.be/46xv0aRAOeMTo see Part 3, click here:youtu.be/q18HmsqUStUMusic..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/b...
Bath Vanity Part 3 downtoearthwoodworks 2016-01-10 | Basic cabinet construction techniques get enhancements that turn this bath vanity into a beautiful piece of furniture. In this video series, we "plus up" a basic cabinet design with many new design elements and construction techniques.In Part 3 the construction of the smaller "branch" cabinet is completed using an "in situ" building process. Pocket screw joinery and glue take care of making a super strong frame. To see Part 1, click here:youtu.be/Nd5Ro2cTuNcTo see Part 2, click here:youtu.be/46xv0aRAOeMMusic..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/b...
Bath Vanity Part 2 downtoearthwoodworks 2015-12-20 | Basic cabinet construction techniques get enhancements that turn this bath vanity into a beautiful piece of furniture. In this video series, we "plus up" a basic cabinet design with many new design elements and construction techniques.In Part 2 the lumber gets milled to size (jointer, planer, SawStop table saw, miter saw) for the two face frames. Festool Domino system and glue is used to join the face frame parts. Another tip on using chalk in the shop and the importance of "mock assembly" is covered.To see Part 1, click here:youtu.be/Nd5Ro2cTuNcMusic..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Bath Vanity Part 1 downtoearthwoodworks 2015-12-13 | Basic cabinet construction techniques get enhancements that turn this bath vanity into a beautiful piece of furniture. In this video series, we "plus up" a basic cabinet design with many new design elements and construction techniques.This "L" shaped vanity will be installed as a "built-in." Learn how to design for a continuous toe-kick, how to build in accommodations for final scribing and fitting during installation, how to assemble complicated face frames, substitute hardwood panels for plywood, make raised-panel doors, the subtleties and nuances of working with dark woods and much more.Music..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
How To Install Drawer Slides downtoearthwoodworks 2015-11-15 | How To Install Drawer Slides - Quick Cabinet Drawers Part 2Demonstration, tips, & techniques for installing drawer slides quickly, easily, and without commercial jigs or templates.Music..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Quick Cabinet Drawers Pt 1 downtoearthwoodworks 2015-10-11 | Quick, sturdy, elegant, easy-to-build drawers.Sometimes drawer-making can be intimidating... especially when using drawer slides. The fit just has to be perfect. There are dozens (maybe hundreds) of ways to make drawers. In this video we look at the drawer lock router bit method and show tips for making perfect drawers quickly and easily.Music..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0http://creativecommons.org/licenses/by/3.0
Quick Kitchen Cabinet Pt 2 downtoearthwoodworks 2015-09-21 | Build a kitchen base cabinet in two hours or less in your woodworking shop? Yes, you can! In Part 2 the sides are assembled to the base, cross cabinet supports are installed, the back and face frame are attached. Ready for drawers or doors and a top!Versatile, sturdy, and beautiful kitchen cabinets need not be daunting or expensive... in fact, they are easy to build. In this two-part video learn the methods to make kitchen cabinets with simple joinery and a basic kit of tools.I used a table saw, jig saw, power drill, and miter saw. You could easily build these cabinets with just a circular saw, jig saw, drill and a shop-made straight-edge saw guide.Build one cabinet like this and you will be ready to tackle an entire kitchen project. The simple base cabinet can be modified and re-sized easily... make double-door, single-door, and all-drawer cabinets by just changing the face frames. Tips in the videos show how to speed up the work without sacrificing quality or strength.Music..."Welcome To The Show," "Feelin Good," Hackbeat,” & "Hustle" all written and performed by Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0
