Uploaded March 2026 | Updated November 2026, 9 minutes ago
So, make sure the bed and chamber are at the correct temperature.
The chamber won't heat until the bed is at the correct temperature.
I cleaned the plate with hot water and detergent, then IPA and then coated with a light spray of 3DLAC
Problems all went away with no further failures.
So, make sure the bed and chamber are at the correct temperature.
The chamber won't heat until the bed is at the correct temperature.
I cleaned the plate with hot water and detergent, then IPA and then coated with a light spray of 3DLAC
Problems all went away with no further failures.










