QIC-36 Interface Diagnostic Box @ForgottenMachines
QIC-36 Interface Diagnostic Box  @ForgottenMachines
Uploaded June 2015 | Updated November 2026, 2 hours ago
This video is used as part of this web page: bit.ly/1Gnihwa For reference, please see:

Archive 1/4" Streaming Tape Drive Maintenance Manual: bit.ly/1QYpv1z

QIC-36 diagram: bit.ly/1Esl9K5
QIC-02 interface high-level diagram: bit.ly/1II8twC
QIC-02 Pin Assignments: bit.ly/1DdDinO
SCSI diagram: http://pinouts.ru/HD/ScsiInternal_pinout.shtml

PLEASE NOTE: I built this diagnostic box. The LED colors are not significant. They are just what I had available, and they are in no order whatsoever. Also, they are all single color only, and are wired to only light on a positive voltage signal. If the signal voltage goes negative, the LEDs will not light, and will not change color.

This was an oversight on my part. When I design the next version of this type of diagnostic box, I will use bi-directional and bi-color LEDs for every pin/connector.

To move frame by frame, try bit.ly/1Gm0YL7 for Chrome

MightyFrame.com
QIC-36 Interface Diagnostic BoxConvergent Technologies AWS CTOS FULL Installation! [Part 2 of 2]How We Put the Retro Recipes Logos on the Intertec Intertube & Heathkit H-19 TerminalsConvergent Technologies AWS Turbo - First Functioning Boot Disk!  (well, sort of...) - Part 1MFM Hard Drive Diagnostic - AT&T Unix PC - Miniscribe 3438 - Park HeadsConnecting to BeagleBone Black Serial Console using a BusPirate on LinuxMFM Hard Drive Emulator from pdp8online.com - running AT&T UNIX PCAssessing Plastibands for QIC Tension Band ReplacementVirtualBox XP setup to run reNOVAteMiniPRO TL866A 9v programming boost for MBM2716 EPROMs part 2Convergent Technologies AWS Boot AttemptNixdorf 820 Stick Memory demonstration at VCFB 2019
Forgotten Machines |

QIC-36 Interface Diagnostic Box

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER