tech 4tressif this video has helped you, Do consider buying me a coffee at: https://buymeacoff.ee/oDbCfFNAJ
DeepLearning series Ep 3 : DeepFaking without a Graphics Card - Deepfacelab CPU Walkthrough In this video i will walk you through how to download and use the deepfacelab CPU version, the best part is you dont have to have any graphics card, only back drop is that it will take more than a day to train the model, will suggest you the hardware required, and finally will help you with the total work flow right from extracting frames and faces to training and then swapping the faces and creating the final video
DeepLearning series Ep 3 : DeepFake without a Graphics Card - Deepfacelab CPU Walkthroughtech 4tress2019-02-04 | if this video has helped you, Do consider buying me a coffee at: https://buymeacoff.ee/oDbCfFNAJ
DeepLearning series Ep 3 : DeepFaking without a Graphics Card - Deepfacelab CPU Walkthrough In this video i will walk you through how to download and use the deepfacelab CPU version, the best part is you dont have to have any graphics card, only back drop is that it will take more than a day to train the model, will suggest you the hardware required, and finally will help you with the total work flow right from extracting frames and faces to training and then swapping the faces and creating the final video
follow the on screen instructions, and if you need any assistance, ask them in the comments section below
background music: unision aperture(NCS release)Fix for loading of unsigned module rejected when installing drivers for usb wifi dongle ubuntutech 4tress2023-05-24 | These drivers work for USB WiFi Adapters that are based on the RTL8811CU, RTL8821CU, RTL8821CUH and RTL8731AU Chipsets - v5.12.0.4
thanks to developer morrownr for updating the drivers regularly
The error is as follows +0.000005] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 +0.000002] us 3-3: Product: 802.11ac NIC +0.000001] usb 3-3: Manufacturer: Realtek +0.000001] usb 3-3: SerialNumber: 123456 +0.007299] Loading of unsigned module is rejected
fix is straight forward, i disabled the secure boot option in Bios settings, do access bios settings, keep tapping on delete while initial boot, then disable the secure boot, after that save the bios settings and reboot, this should make the drivers loaded properly, and wifi should start working
thanks for watching, do like and subscribeRe-Calibrate Xiaomi Fingerprint Sensor After LCD Replacement | No Calibration Tool/Root Requiredtech 4tress2023-05-03 | If you have installed custom firmware, you will need to switch back to the original MIUI firmware. Once you are on the stock MIUI, go to "Settings" and select "Device Info" and then "Additional Info". Tap the "Kernel Version" repeatedly to access the CIT menu. Next, tap the three dots at the top right corner of the screen to access additional settings. In the menu, select "Fingerprint Calibration" and start the calibration process.
The calibration process consists of three steps. For the first step, use a white piece of paper. For the second step, place your thumb vertically on the sensor. For the third step, place your thumb horizontally on the sensor. After successful calibration, reboot your phone and test if you can add a new fingerprint.
If the fingerprint enrollment fails or stops midway, recalibrate the fingerprint using this method again. It should work after calibration.
credits for the method : thanks u/Remarkable-Force-359Xiaomi MIX 4 LCD, USB Flex,Sim Tray and Buttons replacement, Fingerprint calibration without tooltech 4tress2023-04-27 | Xiaomi MIX 4 LCD, USB Flex,Sim Tray and Buttons replacement, Fingerprint calibration without tool Tools and replace meant parts used : 1) Hot air gun 2) B-7000 glue 3) Plastic pry tool 4) Hot Glue Gun 5) ISO Propyl Alcohol 6) USB Flex replacement 7) Replacement Sim tray 8) LCD replacement panel
if the screens glass is obliterated into pieces, do cover it with tap so as the glass pieces don't cause any damage.
if you want to know where I bought the parts from, do message me in the comments section below.How to claim free Unlimited 5g on Airtel | On monthly recharges Rs 239tech 4tress2023-04-26 | for prepaid users, plan should be greater than 239 per month Post paid users can claim it, Unlimited data without any data pack, this is an introductory offer. you will need to claim it every month till the offer ends. To claim this offer you will need to install airtel thanks app. and hit on the Claim Unlimited 5G banner, and wait for the activation message :)
you cant share the data by hotspot or tethering to other device, unlimited data can be used on that mobile onlyContinuity and Ventura on Unsupported Macbook pro 15 inch mid 2015 a1398 | Opencoretech 4tress2023-04-17 | Continuity and Ventura on Macbook pro 15 inch mid 2015 a1398 | Opencore My 15inch macbook pro is from mid 2015, its last official supported os is monterey, so in order to get the latest features such as continuity and universal control, i will be using opencore patcher to spoof my macs SMBIOS to 2017 15 inch Macbook pro (Macbook pro 14,3) you can then restart, hold option key during boot to access opencore boot menu and boot up the mac,get the latest update of ventura by checking the latest available update, and then update the os, after every update you will need to use opencore patcher to patch the drivers. to use continuity, your iphone should be a model after iphone xr, also should have the same apple id on both mac and your iphone, and connected to same wifi network. open facetime, under video setting, you should be able to select iphone under video category.
For opencore app github.com/dortania/OpenCore-Legacy-Patcher/releases thanks so much for watchingDJI Update server error Code:0x1103a0090012 | Using DJI Assistant 2 to update drone and rc firmwaretech 4tress2023-04-12 | DJI Update server error Code:0x1103a0090012 | Using DJI Assistant 2 to update drone and rc firmware When updating dji mavic mini 3 pro from 01.00.0450 to 01.00.0500 rc firmware from 01.02.0400 to 01.02.0600 app version on rc from 1.9.4 to 1.9.9
i continuosly got an error saying "Server error. Wait a moment and try again(Code:0x1103a0090012)"
and update fails, the solution is use DJI Asisstant 2(consumer edition) link : dji.com/downloads/softwares/dji-assistant-2-consumer-drones-series install DJI Assistant 2, need to give pemission from security and privacy menu in mac. Power on the drone, connect it to mac, if latest firmware isnt available keep refreshing it, you will be shown the latest firmware, update your drone, do the same for the rc, and you are good to go .Mavic mini 3 pro gimbal horizon issue when rotating fixtech 4tress2023-03-27 | Mavic mini 3 pro gimbal horizon issue when rotating fix issue at hand : when rotating left or right, the horizon doesnt get stabilized, the horizon axis keeps shiting left or right solution: calibrate compass calibrate IMU calibrate gimbal you are good to go :)
thanks for watchingRemove Ads on lockscreen Uninstall Delete Glance permanentlytech 4tress2023-03-11 | remove ads on lockscreen uninstall delete glance permanently this eats up a lot of ram and battery and constantly makes the phone become slow, you can disable glance under lockscreen options in settings menu, or you can uninstall the app by following the video or delete the app named wallpaper corousel.Recover files and Partitions from ext4, ext3, ext2 Partitions on linux for free using r linuxtech 4tress2023-03-11 | Recover files and Partitions from ext4, ext3, ext2 Partitions on linux for free using r linux link for download r-studio.com/free-linux-recovery/Download.shtml partitions formats supported : ext4, ext3, ext2 from the video you can recover partition and files tooDavinci Resolve 18 Linux(Pop Os) No audio/Video issue fix formats and Compress/Encode large outputtech 4tress2023-03-02 | Davinci Resolve 18 Linux(Pop Os) No audio/Video issue fix formats and Compress/Encode large output Download link for Davinci Resolve blackmagicdesign.com/products/davinciresolve The issue is Davinci Resolve Doesnt support most of the formats on linux list of supported formats are as follows documents.blackmagicdesign.com/SupportNotes/DaVinci_Resolve_16_Supported_Codec_List.pdf
you will need to convert your videos to a supported format using the following application Avidemux : Video Output : Mpeg4 ASP (ff) Audio Output : MP3 (lame) Output Format: MOV Muxer
avidemux.sourceforge.net Settings for converting videos to a format that support Davinci Resolve 18 Avidemux
Output Export Settings used for Davinci Resolve: Format : Quicktime Codec : DNxHR Type: DNxHR 444 12-bit The exported output is pretty large, you can use the following application to convert them to h264 which will reduce the size of exported project to usable size
Handbrake install using flatpak flatpak install fr.handbrake.ghb
settings used for conversion of Exported Video: Preset : Official -- Production -- Production Max
Os used Pop OSfix for Pycharm Linux No module named distutils cmd Unable to locate package python3.9-distutilstech 4tress2023-02-26 | fix for Pycharm Linux No module named 'distutils cmd' Unable to locate package python3.9-distutils
Error while installing python3.9-distutils: E: Unable to locate package python3.9-distutils E: Couldn't find any package by glob 'python3.9-distutils' E: Couldn't find any package by regex 'python3.9-distutils'
Error on pycharm community edition when installing python modules: error ModuleNotFoundError: No module named 'distutils.cmd'
Song: BVRNOUT - Take It Easy (feat. Mia Vaile) [NCS Release] Music provided by NoCopyrightSounds Free Download/Stream: http://ncs.io/TakeItEasyEnable 5g on Iphone 12 13 14 for airtel network indiatech 4tress2022-12-14 | Enable 5g on Iphone 12 13 14 for airtel network india
Enable 5g on Iphone 12 13 14 for airtel network india update Iphone to the version 16.2 Only iphones greater than Iphone 12 has 5g support go to settings - software update, update to version 16.2 once the update is completed go to settings and enable 5g under settings - Mobile data - Options - Voice & Data - 5G ON if your area has Airtel 5G coverage you should see the 5G network icon beside network indicator in the status bar.Fix for AppImage crashing with FATAL_gpu_data_manager_impl_private GPU process isnt usable Goodbyetech 4tress2022-11-29 | Fix for AppImage crashing with FATAL_gpu_data_manager_impl_private GPU process isn't usable Goodbye
open the AppImage in terminal with ./appname.AppImage --no-sandbox
your application will start working, this is a temporary fix, and an update to fix the app should be on the wayfix Restricted setting is currently unavailable |Allow restricted setting| Android 13 | whatsdeletedtech 4tress2022-10-19 | fix Restricted setting is currently unavailable |Allow restricted setting| Android 13 | whatsdeleted
Google is introducing a change with Android 13 that will prevent sideloaded/altstore apps from abusing the Accessibility APIs.
in order for these apps to access the restricted apis, we need to deliberately enable the access in the app info setting, click on the menu with 3 dots in the corner and the tap on Allow restricted settings, this willMacOS | Linux |Arduino error : Python executable not found in Path |error compiling for board esp32tech 4tress2022-05-01 | MacOS | Linux |Arduino error : Python executable not found in Path |error compiling for board esp32 this error occurs due to Deprecation of Python 2 in the latest Operating Systems (Monterey and other linux distros), this can be solved by opening terminal and using command for mac: sed -i -e 's/=python /=python3 /g' ~/Library/Arduino15/packages/esp32/hardware/esp32/*/platform.txt
for linux : sed -i -e 's/=python /=python3 /g' ~/.arduino15/packages/esp32/hardware/esp32/*/platform.txt
steps needed: 1.Setup your router 2.Downgrade the router to miwifi_rb03_firmware_stable_1.2.7 3.access telnet using the generated password telnet 192.168.31.1 username: root password: your password 4.enable ssh # Enable SSH nvram set ssh_en=1 # Add flags which allow you to recover from bad flashes without going back to the OEM firmware. nvram set uart_en=1 nvram set boot_wait=on nvram commit sed -i '/flg_ssh.*release/ { :a; N; /fi/! ba };/return 0/d' /etc/init.d/dropbear 5. set ssh password for root passwd root 6.Start SSHd /etc/init.d/dropbear enable /etc/init.d/dropbear start 7.test ssh connection ssh root@192.168.31.1
8.Download openwrt images to mac/pc mkdir -p xiaomi_openwrt_images curl -L github.com/mikeeq/xiaomi_ax3200_openwrt/releases/download/v20220314/openwrt-mediatek-mt7622-xiaomi_redmi-router-ax6s-squashfs-factory.bin -o xiaomi_openwrt_images/factory.bin 9.Copy the downloaded folder to the router using scp scp -r xiaomi_openwrt_images root@192.168.31.1:/tmp/ 10.Ssh into the router and update ssh root@192.168.31.1 cd /tmp/xiaomi_openwrt_images #Set NVRAM flags nvram set flag_boot_rootfs=0 nvram set "boot_fw1=run boot_rd_img;bootm" nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit 11.Flash the firmware mtd -r write factory.bin firmware 12.Connect your router to PC/Mac via ethernet cable, and log into admin panel using browser at http://192.168.1.1 13.Setup the openWRT and connect the router to the internet, and enable wifi radios. thanks so much for watching, do like and subscribe
00:13 Where i bought the Chinese version(cheapest) Not affiliated 00:27 Quick unbox 01:02 Download 1.2.7 firmware 01:25 Decrypt the telnet password 01:50 Initial setup 02:35 Access admin page to downgrade the router 03:04 Access the router through telnet and initial setup 03:54 Change root password and enable ssh 05:00 Download openWRT firmware to pc 05:12 Transfer openWRT firmware to the router using SCP 05:30 Go to the transferred directory and flash openWRT 05:55 Connect to router using Lan, and setup openWRTFIX for “Final Cut Pro”, update to the latest version | Not compatible with macOS Montereytech 4tress2022-04-23 | FIX for “Final Cut Pro”, update to the latest version | Not compatible with macOS Monterey The solution is pretty simple, Go to Applications folder Right click on Final Cut Pro app, and click on Show Package Content then dive into Content folder, then click on MacOs folder, Double click on Final Cut Pro your App should start, this might be a temporary fix, try updating if you can :)Reon Pocket 2 Teardown : Heres How it Cools/Heats Your Body (Portable Aircon/Heater)tech 4tress2022-04-03 | The Reon Pocket is only available in Japan, Got this imported to Malaysia using E-Bay, Easily Works for around 2 Hours which is more than enough for my Cycling time to Work, Helps me sweat less under scorching sun.I hope SONY releases this in other countries too.
00:00 Intro 00:21 Prying Open the Housing 00:50 Remove the 2 Screws 01:15 Unplug the Fan and Heater Connectors 01:42 Cut the Adhesive Holding the PCB 2:00 Carefully Lift the PCB 2:57 Remove the 3rd Screw 3:35 Slide the PCB,Battery and Heatsink 4:08 How Reon Pocket 2 Works 5:00 How the Heating Functionality Works
Subscribe to Get Updates on the project on making a DIY Portable Aircon :)Installing luci on openwrt installation with ssh | Mi Redmi router Ax6stech 4tress2022-03-24 | for people who have upgraded to latest firmware and are unable to access admin page(luci) at 192.168.1.1, you need to install the luci package from ssh.
follow the on screen installation to see how it's doneRoot Mix 4 with magisk 24.1 on aospa, safetynet fix 2022tech 4tress2022-02-13 | Root Mix 4 with magisk 24.1 on aospa, safetynet fix 2022
select Hide the Magisk App option from Magisk settings. enable Zygisk and Enforce denylist from Magisk settings, and select ur banking app under configure denylist.
install safetynet-fix-v2.2.1.zip from magisk modules tab, and reboot your phone,
thanks for watching, do like and subscriberain test 360 degree video, use mobile youtube apptech 4tress2021-06-19 | malaysia rain testGadget Bridge for Mi Band 6 Privacy oriented and Open source Replacement for Mi Fit APPtech 4tress2021-05-19 | Gadget Bridge for Mi Band 6 Privacy oriented and Open source build A free and cloudless replacement for your gadget vendors' closed source Android applications. i am using it as a daily driver, and they gave recent support for mi band 6, and i am loving it INFO Gadgetbridge, an open-source app that focuses on removing the manufacturer out of the equation.Gadgetbridge is an android application that allows users to use various smart bands such as Pebble, Mi Band, Amazfit Bip, HPlus ZeBand, XWatch, and more, without constantly utilizing the vendor’s closed source application. It also does away with the need to create an account and transmit your user data to the vendor. What’s more, the open source nature of this app allows users to be confident about how their data is handled and ensure that it does not leave their devices. -- XDA
Changelog 0.57.0. Initial limited support for Mi Band 6 Thanks to a PR, we recently merged, Gadgetbridge 0.57.0 is the first release which supports the new Mi Band 6. We call support limited, since it does not yet support flashing the firmware or watchfaces and not everything is tested yet. But thanks to your donations we were able to order one, which will (once it arrives) enable us to test and improve device support! --Gadgetbridge team
Your Mi band should be Connected to the Mi Fit App with your Mi Account, this is required to get the Bluetooth Authentication key for our MI Band which will used later in the process, also do not unpair from Mi fit app
step 1 : Building the app from source Application home page gadgetbridge.org
Copy the link generated under the script to a browser, login to your MI Account which is bonded to our Mi band, copy the link generated after you login to the python terminal, and press enter
This will generate the Auth_Key copy it and save it. send that authkey to your android device via mail or message
Step 3 : Install the Generated or Downloaded Gadget Bridge apk give all the required permissions and Notification access too, Before we start the pairing process, disable or uninstall Mi Fit app, so it doesnt interrupt our GadgetBridge pairing proces. on Gadget Bridge, start by tapping on the add button, give the location access, as android needs location access to scan for bluetooth devices. tap on Start discovery this should display the Mi band 6 tap and hold on it, to start configuring the settings. paste in the Authentication key and change other settings to your liking. and tap on the back button, this will start the pairing process, and should add your mi band 6 to the application.
this app is a good alternative for the Mi Fit app, and this makes it possible to go thorough your health and activity stats on your device without the need to share it with the device manufacturer.
and if you are good at coding, Contributions are welcome, be it feedback, bug reports, documentation, translation, research or code. Feel free to work on any of the open issues; just leave a comment that you're working on one to avoid duplicated work. --devs at GadgetBridge
I pledge that all the money i get for this video, will send it directly to the GadgetBridge team :)
@inproceedings{wan2020bringing, title={Bringing Old Photos Back to Life}, author={Wan, Ziyu and Zhang, Bo and Chen, Dongdong and Zhang, Pan and Chen, Dong and Liao, Jing and Wen, Fang}, booktitle={Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition}, pages={2747--2757}, year={2020} }OpenClover SSDT GPU SPOOF r9 390 ryzen build | 14 mb video memory | Graphics spooftech 4tress2020-11-09 | OpenClover SSDT GPU SPOOF r9 390 ryzen build
process goes like this : Boot into Windows OS on the same system, open Device Manager , go to Display adapters -- AMD Radeon right click and click on properties go to Details tab and select Location paths copy the ACPI address and convert as follows ACPI(_SB_)#ACPI(PCI0)#ACPI(GPP8)#ACPI(X161) to \_SB_.PCI0.GPP8.X161
use the above address and edit the downloaded SSDT-GPU-SPOOF.dsl as shown in the video
now that you have edited SSDT-GPU-SPOOF.dsl file, we need to convert that to SSDT-GPU-SPOOF.aml using the downloaded iASL.exe, open command prompt or power shell in the iASL folder, and use the command iasl.exe SSDT-GPU-SPOOF.dsl
this will create SSDT-GPU-SPOOF.aml file
reboot to mac, copy SSDT-GPU-SPOOF.aml file to BDU -- EFI -- OC -- ACPI folder
now that the spoofed SSDT file is copied to the opencore bootloader we need to update the config.plist file
to do that open download ProperTree from the above link, go to ProperTree folder, and double click on the ProperTree.command, it will not be opened at first, you need to go to Security & Preferences, and click on Open anyway, this will open the ProperTree app, open bdu -- efi -- oc -- config.plist then in the ProperTree select file -- OC Clean Snapshot and save it
open jupyterlab using jupyter lab[Android tv] Installing ubuntu and accessing terminal on android tvtech 4tress2020-08-30 | recently got my hands on an android tv, will be updating the channel with a lot of android tv related videos.
Connect keyboard and mouse for a better user experience Download and install these apps from play store on the tv: 1. Send files to Tv 2. File manager
On your android phone, download and install 1. Send files to tv 2. F-droid.apk from f-droid.org
Connect your android device to the same wifi network as your Android tv, send the apk to the Android tv using Send files to Tv app, Install F-droid app on the tv using the file manager
open F-droid store, wait for it to update the repo, Search for the app UserLand, download the app and install it open the UserLand app, and click on ubuntu from the list enter the credentials for the ubuntu installation, select ssh for now.
once the required files are installed you can access the ubuntu installation.
Thanks for watching and do subscribe and like the video if it has helped you
music credits Song: Malik Bash - Ghosts [NCS Release] Music provided by NoCopyrightSounds Free Download/Stream: http://ncs.io/Ghosts Watch: http://youtu.be/-9Z5Nhsm7GA[fix]NewPipe could not decrypt video URL signature error | [YouTube] Fix crash when loading videotech 4tress2020-07-29 | [fix]NewPipe could not decrypt video url signature error | [YouTube] Fix crash when loading video
a method for converting a single RGB-D input image into a 3D photo, i.e., a multi-layer representation for novel view synthesis that contains hallucinated color and depth structures in regions occluded in the original view.
execute the following command from project folder(activate the 3dp environment) command #startprocess : python main.py --config argument.ymlDeepLearning series Ep 5.1 : DeepFakes on Mac OS Catalina | CPU | April update | Torrent includedtech 4tress2020-04-23 | if this video has helped you, Do consider buying me a coffee at: https://buymeacoff.ee/oDbCfFNAJ
DeepLearning series Ep 5.1 : DeepFakes on Mac OS Catalina | CPU | April update | Torrent included
Blog post(torrent magnet link included) https://tech4tress.xyz/2020/04/16/deepfakes-on-macintosh-deepfacelab-april-update/
command #BASE_DIRECTORY cd ~/Documents/deepfakes/Deepfacelab
command #3 sh 1_extract_PNG_from_video_data_src.sh
command #4 sh 2_extract_PNG_from_video_data_dst.sh
command #5 sh 3_data_src_extract_faces_S3FD.sh
command #6 sh 4_data_dst_extract_faces_S3FD.sh
command #7 sh 5_train_Quick96.sh
command #8 sh 6_merge_Quick96.sh
command #9 sh 8_merge_to_mp4.sh
for lossless video sh 7_merge_to_mp4_lossless.shFix for Hard Disk showing 2Tb instead of 4Tb on Windows OStech 4tress2020-04-04 | Fix for Hard Disk showing 2Tb instead of 4Tb on Windows OS this happened on my internal seagate hard drive open Disk Management, right click on the drive, and click on convert to GPT, and you can now use the whole 4Tb drive space available, next you can format the drive and use the newly formatted drive
thanks for watchingfix for checkra1n ERROR: Failed to open device 0xc5134 in recovery:DFU modetech 4tress2020-04-03 | fix for checkra1n ERROR: Failed to open device 0xc5134 in recovery:DFU mode this happens when you connect your iphone in recovery directly, the solution is pretty simple, what you need to do is connect your phone directly in normal mode(booted up), trust your laptop, then use the start option on the Checkra1n app, it will boot your iphone/ipad to recovery mode, and then use the on screen instructions to boot your device to dfu mode, this should jailbreak your IDevice.
thanks for watching[Fix] Magisk manager 20.3 ctsProfile : False 2020(for fixing GPay, mobile wallets and Banking apps)tech 4tress2020-03-11 | Open Magisk manager,
download and install both MagiskHide Props Config and Busybox for android NDK modules from downloads, after installing reboot your phone.
Install terminal emulator from playstore
open terminal emulator
enter command : su Grant superuser access when prompted
type in command: props
and follow the on screen options select option 1 - edit device fingerprint by typing : 1 then type in f to Pick a certified fingerprint from the list pick your mobile manufacturer select your mobile model select the latest available android version finally reboot your phone
this should fix the ctsProfile issue, to use banking or wallet apps, hide magisk by using magisk hide option and select the app you want to hide root access from
do like and subscribe
music credits: Song: Jim Yosef - Link [NCS Release]
commands used: in terminal go to the extracted folder sandcastle(android-sandcastle) folder using cd /path/to/folder
use following command to setup and download the android os ./setup_mac.sh
and use the following command to boot into the installed android os ./start_mac.sh
issues: currently only works on iphone 7 and iphone 7 plus if you replaced the screen with oem touch and displays, touch input might not work
Credits: twitter:twitter.com/qwertyoruiopz checkra1n team for their awesome jailbreak and pongoos Twitter: twitter.com/CorelliumHQ Corellium for making it once again possible to install android on iphonesToyota Innova Chrysta Key Battery Replacementtech 4tress2020-01-11 | In this video i will show you how to replace the battery of toyota innova chrysta's key remotes battery.Finding ECID and Saving SHSH Blobs for ios devices (save them before its too late)tech 4tress2020-01-06 | by following this video you can save the shsh blobs for ios devices that are currently being signed by apple, you can use these blobs to downgrade to the current ios version even after apple stops signing them.
so save them before its too late
Command #1 cd ~/Documents/deepfakes/DeepFakesLabDeepLearning series Ep 5 : DeepFakes on Mac OS Catalina | CPU ( 13 inch MacBook Pro 2013)tech 4tress2020-01-01 | if this video has helped you, Do consider buying me a coffee at: https://buymeacoff.ee/oDbCfFNAJ
#deepfakesonmac Check out the textual tutorial at www.tech4tress.xyz
DeepLearning series Ep 5 : DeepFakes on Macintosh Catalina CPU ( 13 inch MacBook Pro 2013)
credits: bgm - Jim Yosef - Eclipse [NCS Release] youtube.com/watch?v=1WP_YLn1D1c[Fix] Checkrain.dmg is damaged and cant be opened / checkra1n crashes doesnt opentech 4tress2019-11-26 | you need to disable MacOS's Gatekeeper in terminal using the command sudo spctl --master-disable this should allow you to open the Checkra1n.dmg file
if checkra1n does not open and crashes on start, then right click on the checkra1n icon, and click on show package content, and navigate to content - MacOS and click on checkra1n_gui
this should start the application
once you are done with using the application, it is advisable to re-enable gatekeeper by using the command sudo spctl --master-enable
thanks for watching, do like and subscribe if this video helped you[FIX]Mac OS Catalina Adobe Photoshop CS6 needs to be updated errortech 4tress2019-10-25 | Open the contents of the package by right clicking on Adobe Photoshop CS6.app, go to Content and then to Mac OS folder, double click on Adobe Photoshop CS6 app, this will start the application
music credits : NCS http://ncs.io/firstrainDeepLearning series Ep 4 : DeepFakes on Linux - Using FaceSwap App on Ubuntutech 4tress2019-10-10 | if this video has helped you, Do consider buying me a coffee at: https://buymeacoff.ee/oDbCfFNAJ
DeepLearning series Ep 4 : DeepFakes on Linux - Using FaceSwap App on Ubuntu
In this video i will walk you through how to setup and use FaceSwap application on Ubuntu operating system, if you are having nvidia gtx graphics card, this video is for you, you can use cuda cores on ubuntu too, the best part about this app is you will have a graphical user interface which will be easier for most of the people
first you will need to install anaconda for linux, you can find that from this link: anaconda.com/distribution
after downloading open terminal to download folder and use this command to install it sh ./Anaconda*.sh this will install the Anaconda distribution
open Anaconda-Navigator and create a python environment with version 3.6, open the environment, Clone the faceSwap repo using the following command git clone --depth 1 github.com/deepfakes/faceswap.git
once the repo is cloned, change the directory to faceswap folder using cd faceswap
now that you are in faceswap folder, use the following command to install the application: python setup.py
during installation process, you will be prompted with multiple installation options, answer them according to your setup.
once the installations completed, open the installed faceswap using the command python faceswap.py gui
this will open the FaceSwap application, follow the on screen instructions to know how to use it, if you guys loved this video do give a thumbs up and subscribe, also if you have any doubts do shoot em up in the comments section below
background music: unision aperture(NCS release)[Fix]After Effects CS6 High Sierra Mojave : You cant use this version of application, updated linktech 4tress2019-02-10 | [Fix]After Effects CS6 Sierra High Sierra Mojave : You can't use this version of application error description: You can't use this version of application "Adobe After Effects CS6" with this version of macOS (Mojave) updated link : drive.google.com/file/d/1iF9w2bLgcY0wN4rRs2-U03fUAJmuwXqw/view?usp=sharing Adobe After Effects 11.0 quit unexpectedly. Click Reopen to open the application again. Click report to see more detailed information and send a report to apple.
After Effects Alert Last log message was: (43833880640) (AppDirs) (5) Required Dir = /Applications/Adobe After Effects CS6/Adobe After Effects CS6/Contents/Required Generating crash log, which may take a few minutes
thanks for watching and do take time and mention if it work in the comments section belowFix : Mojave Photoshop cs6 Weve encountered issuestech 4tress2019-01-30 | Mojave Photoshop cs6 We've encountered issues fix
this is what i got when i tried installing Adobe Photoshop CS6 on my macintosh We've encountered the following issues Installer failed to initialize. This could be due to missing file. Please download Adobe Support Advisor to detect the problem.
solutions pretty simple right click on the installer, open "show contents of the package", then go to Contents/MacOs, execute the Install script and you are good to go.. if this solution has helped please take a small amount your time to click the thumbs up and also mention it in the comments for the world to know..... if possible do subscribe :)DeepLearning series Ep 2 : DeepCreamPy Installation and Workflow TUTORIALtech 4tress2019-01-23 | DeepLearning series Ep 2 : DeepCreamPy Installation and Workflow TUTORIAL in this video i will walk you through how to install the required dependencies, hardware needed(can run mostly on all computers),and help you run DeepCreamPy to run and un-censor anime or hentai blurred images
if this video has helped you or if you wish to support me further,Do consider buying me a coffee at: https://buymeacoff.ee/oDbCfFNAJ :)
****************************************** DeepLearning series Ep 1 : DeepFaceLab Installation and Workflow TUTORIAL youtube.com/watch?v=nboXZlXGFWM
background music: unision aperture(NCS release)DeepLearning series Ep 1 : DeepFaceLab Installation and Workflow TUTORIALtech 4tress2018-12-17 | DeepLearning series Ep 1 : DeepFaceLab Installation and Workflow TUTORIAL In this video i will walk you through how to install the dependencies required, hardware suggestions, and finally will help you with the total work flow right from extracting frames and faces to training and then swapping the faces and creating the final video
**UPDATE** as per the developer of the app , you dont need to install cuda 9 and cuDNN in the app, and all you would need are the drivers for the nvidia gpu. Models used Source: Robert Downey JR (Iron Man stage show) Destination : shia lebouf(do it video)
training algo used : defaker model trained for 14 hours
background music: unision aperture(NCS release)TUMBLR DOWNLOADER they are gonna block our fav blogs, lets download them before 17th decembertech 4tress2018-12-10 | now that tumblr has changed its policies and deleting most of the blogs which we follow, follow these steps to download them(rip them)
thank the dev for this awesome crawler at: github.com/dixudxiphone error message not sent for normal messages fixtech 4tress2018-12-10 | if this video has helped you, you can buy me a coffee maybe :)? https://buymeacoff.ee/oDbCfFNAJ ETH: 0x1fcbBBa480b4c116cc37924353F93D26365B2303
Fixing IPhone error "message not sent" One of the reasons for this error to occur is that the message center number of your carrier isn't set correctly! to set that follow this Change the SMS Centre Number
From the home screen, tap Phone.
1. If the dial pad is not visible, tap Keypad.
2. Enter *#5005*7672#, then tap Call.
3. The current SMSC setting is shown on the screen. Tap Dismiss. 4. If the SMSC number needs changing, enter **5005*7672*SMSCNUMBER#, (where SMSCNUMBER is replaced with the correct SMSC number in full international format).
5. Tap Call. The message "Setting succeeded, Service Centre Address, No Address" will appear on screen. 6. Tap Dismiss.
7. Enter *#5005*7672# then tap Call.
The new SMSC number will be shown on the screen. So follow the video to set it right to solve the problem
sources:http://ee.co.uk/help/phones-and-device/apple/apple-iphone-6/apple-iphone-6-calls-messaging-and-email/iphone-6---change-the-sms-centre-numberFind serial number of hard drivetech 4tress2018-11-16 | my 4tb wd elements external drives serial numbers erased after use, so i had to do this to find the serial number for my rma i had to produce the proof of ownership by submitting the bill, i lost the bill to, wd support asked me to crack open the drive to send them the serial number(only open the exterior case, on their request or you will loose your warranty), they gave me the rma request form. sent my drive for rma, will update how it went hope it helps you
For Windows OS: command used in command prompt wmic diskdrive get serialnumber
For Macintosh OS: download wd disk utility from, support.wdc.com/downloads.aspx?p=157 open wd disk utility, hover your mouse on the hd icon, get serial number thanks for tuning in
------------------------------------------------------------------------------------------------------- Song: Ship Wrek, Zookeepers & Trauzers - Vessel [NCS Release] Music provided by NoCopyrightSounds. Watch: youtu.be/PXf4rkguwDI Download/Stream: http://ncs.io/VesselCrUpdate IMAC 2011 to High Sierra( High Sierra Download Link)tech 4tress2018-10-30 | This video is about updating old 2011i mac to mac os High Sierra
as the latest version of mac os (mojava) isnt supported by devices made prior to 2012, i had to find the download link to high sierra and then use it to manually update my mid 2011 imac to high sierra.