Uploaded January 2012 | Updated November 2026, 3 hours ago
These are target holders I made to take to our gun range for target practice.
each one takes:
1- 10 foot PVC 1 1/4 schedule 40 stick approx 4.25
2- 1 1/4 pvc caps
2- 1 1/4 tee 1.25 ea
2- 1 1/4 90 degrees connectors 1.07 ea
2 - furring strips .85 ea
cut the 10 foot stick into 7 - 16" pieces
the rest is self explanatory
I found this idea online or someone else had posted an idea of these with 1 1/2 inch Pvc. however I used 1 1/4 inch pvc schedule 40 for my project. The furring strips cost about .85 cents each and fit perfectly in the tee . When you are out at the range you can find a shotgunshell to stick in front of the strip to keep it from coming foward in the holder. please feel free to comment ask questions. I have a few gun review videos and will be posting more in the future please subscribe and rate.
.
These are target holders I made to take to our gun range for target practice.
each one takes:
1- 10 foot PVC 1 1/4 schedule 40 stick approx 4.25
2- 1 1/4 pvc caps
2- 1 1/4 tee 1.25 ea
2- 1 1/4 90 degrees connectors 1.07 ea
2 - furring strips .85 ea
cut the 10 foot stick into 7 - 16" pieces
the rest is self explanatory
I found this idea online or someone else had posted an idea of these with 1 1/2 inch Pvc. however I used 1 1/4 inch pvc schedule 40 for my project. The furring strips cost about .85 cents each and fit perfectly in the tee . When you are out at the range you can find a shotgunshell to stick in front of the strip to keep it from coming foward in the holder. please feel free to comment ask questions. I have a few gun review videos and will be posting more in the future please subscribe and rate.
.










