Uploaded June 2023 | Updated September 2026, 1 day ago
Rare expensive lock was on loan so pardon the rear tension. check out Westlockpicking and DonotDublicate to see front tension method I talk about in the video in action. here is full video ☕☕ https://m.youtube.com/watch?v=hiU_hXIUjEU&t=499s
Rare expensive lock was on loan so pardon the rear tension. check out Westlockpicking and DonotDublicate to see front tension method I talk about in the video in action. here is full video ☕☕ https://m.youtube.com/watch?v=hiU_hXIUjEU&t=499s
![[L144] Lucznik Archer LC Pick and Gut.](https://i.ytimg.com/vi/wUHeWh6-b6k/mqdefault.jpg "[L144] Lucznik Archer LC Pick and Gut.
Lucznik Archer LC is a really tricky lock from the Polish manufacturer Lucznik. This lock has some spools and standard drivers as well as two rows of trap pins. The trap pins are really small spools and like to drop very easily IMHO. To pick a full 360 is part of the challenge with this lock I think due to the trap pins. Thanks for watching and cheers
00:00 Lock Operation
00:27 Picking starts
02:28 Top stack picked time to start phase 2
13:01 Right side traps picked, do not drop stuff in bottom of keyway.
14:03 Phase 3 pick out of left side trap pins
16:26 Picked to open
17:27 Gutting starts and rambling
26:29 Gutted and some more talk about pins ect
27:30 Close up cheers and thanks
#lockpicking #locksport #lpu")
![[L174] Western Electric 30A pick and gut](https://i.ytimg.com/vi/wyiKmU4nTrY/mqdefault.jpg "[L174] Western Electric 30A pick and gut
Today we have an old model of Western Electric 30 A. It has 8 levers with false gates. Shared spring for the lever pack to make oversetting rather easy. To add more problems the cam an the plug are driven independently from one another. So tensioning must be done by the cam and not the plug like many other WE series locks. Because of the tension setup feedback is very muted as their is not that much force on the fence (1.mm wire worth of tension) lol. Cheers and thanks for stopping by
00:00 Lock Operation
00:27 Picking
05:10 Picked
07:04 Gutting starts
11:03 Gutted lets take a look and ramble
16:02 Tools and some more talk
17:34 Thanks and cheers
#lockpicking #locksport #lpu")
![[L102] Abloy Protec2 Picked with Wire and Gutted](https://i.ytimg.com/vi/x5V6KyT81FA/mqdefault.jpg "[L102] Abloy Protec2 Picked with Wire and Gutted
Abloy Protec2 Picked with wire and some challenge lock pin stock for a tensioner. P2 has all the Disc detainer goodies. False gates, dbs, ect. Sorry for the delay in gutting it was my first time. lol Feel free to like comment and all the things. Cheers and thanks for watching
00:00 Lock operation
00:20 Dbs and rear disc setting
01:22 Picking starts
12:26 Open gasp
13:40 Gutting starts
15:04 Sidebar
15:26 Picked core
15:34 Ok so gutting paused because its my first time :) lol
16:47 Sorry watching a video
20:13 Warning eye protection is good. INCOMING ball bearing!
21:04 Getting into the disc pack
24:55 Tools and tactics ramble
27:26 Close up Thanks and cheers
#lockpicking #locksport #lpu")
![[168] Keso 4000s keyless Picked and Gutted](https://i.ytimg.com/vi/y9P3y0n6YJw/mqdefault.jpg "[168] Keso 4000s keyless Picked and Gutted
Today our example is a keyless keso 4000s. Inside we have 14 pins in 3 rows. Over set traps on key pins and sharp spooled and standard drivers. Sorry about the long gutting. Thanks for stopping by and cheers
00:00 Lock Operation
00:28 Picking starts
04:23 Picked
06:42 Gutting starts (for what feels like forever LOL)
14:52 Gutted and lets look at internals and ramble
24:02 Close up Thanks and Cheers
#lockpicking #locksport #lpu")
![[L121] ASSA 700 Hourglass Spools Picked and Gutted](https://i.ytimg.com/vi/ygDGSjOsz_Q/mqdefault.jpg "[L121] ASSA 700 Hourglass Spools Picked and Gutted
This ASSA 700 has 7 pins, 2 tapered pins and 5 hourglass spools. I really enjoyed picking it. I found it rather fun. Thanks for watching and cheers
00:00 Lock Operation
00:26 Picking starts
01:42 Picked
05:05 Gutting actually starts lol
07:35 Gutted and checking out internals
09:06 Close up thanks and cheers
#lockpicking #locksport #lpu")
![[L132] Nabob 7*7 clone Picked and Gutted](https://i.ytimg.com/vi/zCHi0Wfi0_M/mqdefault.jpg "[L132] Nabob 7*7 clone Picked and Gutted
This Nabob is a clone of Mul-t-lock 7x7/garrison. Had a nice handful of spools. Was a fun pick.
00:00 Lock Operation
00:16 Picking Starts
01:14 Open
02:23 Gutting Starts
05:08 Reassembly starts
08:05 Reassembled
08:17 Tools rambling and cheers
#lockpicking #locksport #lpu")
![[L154] LOB 5 Pin Picked and Gutted](https://i.ytimg.com/vi/zPIoQ41-re8/mqdefault.jpg "[L154] LOB 5 Pin Picked and Gutted
This example of Lob is 5 standard pins with a tricky keyway. Good tolerances add a lot to the challenge as well.
00:00 Lock Operation
00:29 Picking starts
05:53 Picked
07:50 Gutting starts
09:54 Gutted and lets look at internals
13:21 Close up thanks and cheers
#lockpicking #locksport #lpu")
