Uploaded May 2020 | Updated September 2026, 2 weeks ago

---

Time to take a look at installing all associated electronic bits. Wiring them up and testing.
Closer Look Electronic Components/Cabling: 0:46
Installing Servo Drives: 09:49
Servo Drives Installed: 12:25
Wiring Mains Power to Servo Drives: 13:45
Mains Power Wiring Complete: 21:27
Wiring Servo Drives Output Power: 22:43
Servo Drives Output Power Wiring Completed: 26:27
Initial Servo Drive testing: 28:54
Servo Drive PT Actuator Compatible Parameter Settings: 29:44
PT Actuator Servo Motion Controller: 36:03
Look Inside Controller Board: 43:03
Bajer E-stop Switch Box: 46:16
PT Actuator Custom E-stop Switch: 47:30
Installing E-stop Switch Plug In Servo Motion Controller Box: 49:30
Closer Look PT Actuator Aviation Connectors: 52:49
Connecting Actuator And Servo Motion Controller Wiring to Servo Drives: 53:33
Initial Full System Testing: 56:47
Building the Servo Drive Containment Enclosure: 1:00:10
Cable Managment Wiring Duct: 1:03:47
Final Cable Management Solution: 1:07:12
Final Thoughts: 1:09:32

pt-actuator.com/index.html

Help support the Sim Racing Garage!

Follow me on instagram: instagram.com/simracinggarage

Sim Racing Garage Consulting Service
simracinggarage.com/srg-consulting-services

PayPal Donations:
paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=NKXYPYEHSJYFY&source=url

patreon.com/simracinggarage

simracinggarage.com
Donate, or purchase an official
Sim Racing Garage T-Shirt.
SRG T-Shirts are available at the
Sim Racing Garage Store:
simracinggarage.com/store

My current Computer and Monitor setup:
MOBO: Asus Z97-a
CPU: i7490k overclocked to 4.6GHz air cooled.
GPU: 1080ti stock clock
RAM: 16gig
Monitors: 3 27" Asus ROG PG279Q IPS panels at 144hz. 4th
monitor is 1920x1080 TN panel.
Side monitors are at 60°