Uploaded September 2017 | Updated November 2026, 3 hours ago
The 470K resistor (feedback resistor on second opamp) shown in the diagram is too high and gives too much gain. It should be a 220K.
Showing how I amplified and filtered the small signals from this module to make it suitable for use with an Arduino analogue input.
Here's the joystick module on Ebay: ebay.co.uk/itm/1-x-ALPS-3D-JOYSTICK-ANALOG-ANALOGUE-THUMBSTICK-FOR-PS3-DualShock-3-/252632824917
The 470K resistor (feedback resistor on second opamp) shown in the diagram is too high and gives too much gain. It should be a 220K.
Showing how I amplified and filtered the small signals from this module to make it suitable for use with an Arduino analogue input.
Here's the joystick module on Ebay: ebay.co.uk/itm/1-x-ALPS-3D-JOYSTICK-ANALOG-ANALOGUE-THUMBSTICK-FOR-PS3-DualShock-3-/252632824917



