Uploaded November 2025 | Updated November 2026, 4 days ago
Project Neon (Neo Geo MVS) - Upgraded to 1.1 on PVM-2950QM. Captured in 4K/60p with iPhone 17 Pro Max.
INSTRUCTIONS (IMPORTANT!) —
!!! Please read ALL instructions BEFORE you proceed with the first step of the update !!!
A REMINDER FOR MVS USERS: YOU’LL HAVE TO GO TO THE SOFT DIPS (BY PRESSING THE TEST BUTTON = 3. SOFT DIPS = PROJECT NEON = UPDATE MODE = YES) TO PUT THE CARTRIDGE INTO UPDATE MODE. PLEASE LET US KNOW SHOULD YOU WANT TO UPDATE VIA A MULTI-SLOT MVS, AS AN AUTOMATED RESET AFTER THE UPDATE IS NOT POSSIBLE ON SOME OF THESE AND IT MIGHT BE HARD TO TELL WHEN THE UPDATE ACTUALLY FINISHED.
1. This first update involves a TWO STEP procedure, e.g. the first update you’ll see after connecting to your wifi will be for the cartridge firmware (e.g. Cartridge FW2.0), not the game itself!
2. After applying the cartridge firmware update via wifi, you will have to go to the update menu again and will then see Project Neon (v1.1)
3. During both updates there will be NO PROGRESS SHOWN on the screen. The only thing you will occasionally see is a static text and SOME FLICKER during the second step of the update. There will be no harm to your system or monitor, it’s just a side effect of the ROMs being rewritten while the cartridge is attached to the system. But if you’re sensitive to flicker, please reach out and we’ll provide you with an offline/USB-C update file for your specific cartridge.
4. Please stay patient and don’t interrupt system power during the update. After each update step the MVS/AES system will automatically reset.
5. Updates can take between 3-20 minutes depending on your internet connection. Again, there will be no progress shown.
6. If anything feels off, please don’t hesitate to reply to this email or DM us on Twitter. There will always be a way to recover via a USB-C in the unlikely event that your dog is pulling the power cord during the update :)
7. Future updates (Project Neon v1.2 and beyond) will only involve applying one update, and there will also be progress shown on the screen during the update as soon on the recently shared video on our YouTube channel! In fact, you can just run the second update (Project Neon v1.1) a second time to see how this will look like. Installing the update again won’t have any negative effect on your cartridge, but you’ll again have to wait until it’s fully finished.
— CHANGELOG —
Cartridge FW Update 2.0
- Updated OTA routine with automatic retries and faster download speeds
- Fixes rare issue for some AES System + Cartridge combinations that previously required a reseat sometimes
Project Neon V1.1:
- Added new, subtle propulsion flames to player ship when accelerating/decelerating
- Increased volume of some SFX, including explosions
- Increased power text timeout from 1 to 2 seconds
- Improved visibility of segment dividers in stage-boss power bars
- Minimal adjustments to some BGM tracks
- Fixed beam sometimes didn’t trigger on button press during busy scenes
- Fixed SFX not playing when attract mode sound is disabled on either system or game level
- Fixed "x" of font not being very readable in TATE mode
- Fixed accidentally flipped combo timer in YOKO mode
- New update mode with % progress shown during future updates
Tipee : fr.tipeee.com/igolgo13
Project Neon (Neo Geo MVS) - Upgraded to 1.1 on PVM-2950QM. Captured in 4K/60p with iPhone 17 Pro Max.
INSTRUCTIONS (IMPORTANT!) —
!!! Please read ALL instructions BEFORE you proceed with the first step of the update !!!
A REMINDER FOR MVS USERS: YOU’LL HAVE TO GO TO THE SOFT DIPS (BY PRESSING THE TEST BUTTON = 3. SOFT DIPS = PROJECT NEON = UPDATE MODE = YES) TO PUT THE CARTRIDGE INTO UPDATE MODE. PLEASE LET US KNOW SHOULD YOU WANT TO UPDATE VIA A MULTI-SLOT MVS, AS AN AUTOMATED RESET AFTER THE UPDATE IS NOT POSSIBLE ON SOME OF THESE AND IT MIGHT BE HARD TO TELL WHEN THE UPDATE ACTUALLY FINISHED.
1. This first update involves a TWO STEP procedure, e.g. the first update you’ll see after connecting to your wifi will be for the cartridge firmware (e.g. Cartridge FW2.0), not the game itself!
2. After applying the cartridge firmware update via wifi, you will have to go to the update menu again and will then see Project Neon (v1.1)
3. During both updates there will be NO PROGRESS SHOWN on the screen. The only thing you will occasionally see is a static text and SOME FLICKER during the second step of the update. There will be no harm to your system or monitor, it’s just a side effect of the ROMs being rewritten while the cartridge is attached to the system. But if you’re sensitive to flicker, please reach out and we’ll provide you with an offline/USB-C update file for your specific cartridge.
4. Please stay patient and don’t interrupt system power during the update. After each update step the MVS/AES system will automatically reset.
5. Updates can take between 3-20 minutes depending on your internet connection. Again, there will be no progress shown.
6. If anything feels off, please don’t hesitate to reply to this email or DM us on Twitter. There will always be a way to recover via a USB-C in the unlikely event that your dog is pulling the power cord during the update :)
7. Future updates (Project Neon v1.2 and beyond) will only involve applying one update, and there will also be progress shown on the screen during the update as soon on the recently shared video on our YouTube channel! In fact, you can just run the second update (Project Neon v1.1) a second time to see how this will look like. Installing the update again won’t have any negative effect on your cartridge, but you’ll again have to wait until it’s fully finished.
— CHANGELOG —
Cartridge FW Update 2.0
- Updated OTA routine with automatic retries and faster download speeds
- Fixes rare issue for some AES System + Cartridge combinations that previously required a reseat sometimes
Project Neon V1.1:
- Added new, subtle propulsion flames to player ship when accelerating/decelerating
- Increased volume of some SFX, including explosions
- Increased power text timeout from 1 to 2 seconds
- Improved visibility of segment dividers in stage-boss power bars
- Minimal adjustments to some BGM tracks
- Fixed beam sometimes didn’t trigger on button press during busy scenes
- Fixed SFX not playing when attract mode sound is disabled on either system or game level
- Fixed "x" of font not being very readable in TATE mode
- Fixed accidentally flipped combo timer in YOKO mode
- New update mode with % progress shown during future updates
Tipee : fr.tipeee.com/igolgo13






![[FIXED] RGB modded PCE Duo-RX Display issue on Sony BVM-D20F1E
Since I RGB modded (8 pins) my PCE Duo-RX, my monitor doesnt display correctly the picture.
No issue with the PVM 2950QM. I tried to fix via the display set up menu, nothing changed.
If someone already had this issue...
Fixed by activating the VCR mode in the Extended menu !
http://www.noelshack.com/2017-02-1484156163-iphone-image-01-11-2017.jpg [FIXED] RGB modded PCE Duo-RX Display issue on Sony BVM-D20F1E](https://i.ytimg.com/vi/Jdpd0LZoaf4/mqdefault.jpg)



