Program Seeeduino XIAO as USB-to-Serial bridge, to access HC-08 BLE 4.0 Module. @AndroidEric

Program Seeeduino XIAO as USB-to-Serial bridge, to access HC-08 BLE 4.0 Module. @AndroidEric

Uploaded September 2020 | Updated September 2026, 2 weeks ago

In this exercise, Seeeduino XIAO is programmed as a USB-to-Serial bridge to read/write HC-08 from Raspberry Pi using Arduino IDE's Serial Monitor.

Program Seeeduino XIAO as USB-to-Serial bridge, to access HC-08 BLE 4.0 Module.

Install official Visual Studio Code (ver 1.5) and PlatformIO IDE on Raspberry Pi OS (32 bit)

Install Nano RP2040 Connect to Arduino IDE and fix An error occurred while uploading the sketch

Check installed package in Raspberry Pi OS, using dpkg/dpkg-query

Install JDK (from Oracle) on Ubuntu 20.04

Raspberry Pi Pico/CircuitPython 7+ LSM303 Accelerometer/Magnetometer

Flash MicroPython firmware on ESP32-C3

Install Python 2 and pip on Ubuntu 20.04

ESP32 BLE Client remote control Raspberry Pi Pico/HC-08 via Bluetooth

Raspberry Pi Pico/CircuitPython + ILI9341 SPI Display with Touch

Python to control Raspberry Pi Camera

Arduino Nano RP2040 Connect/CircuitPython + ov7670 cam (incomplete) display on st7789 Display

Program Seeeduino XIAO as USB-to-Serial bridge, to access HC-08 BLE 4.0 Module.