Uploaded February 2026 | Updated September 2026, 2 weeks ago

---

Overhead glass work on an upside-down surface? Here’s the move.

We’re stacking 4 layers of 1708 wet on wet on peel ply, starting small and building out to match the taper. Once it’s fully wet out and bubble-free, we lift the whole laminate in one shot and set it in place.

Prep it right. Work the air out. Let it cure.

Follow along as this thru-hull repair comes back stronger than before.

@boatworkstoday

#TotalBoat #ForMakersByMakers #FiberglassRepair #BoatRepair #MarineDIY