Uploaded December 2016 | Updated November 2026, 16 hours ago
Click Here to View This Product: goo.gl/bg58X3
Increased Stiffness with an Integrated Resin System
This unidirectional is non-woven, so there is no crimping of the fibers and less than 3% of polyester binder is used on one side to allow for the highest possible density of carbon fibers. The resin system with curing agent has been preimpregnated into the fabric for an ideal 37% strength-to-weight ratio, and repeatable high-quality results.
This 9.0 oz fabric is widely used in marine applications such as boat hulls, but is also a great choice for recreational parts like hockey sticks and bicycle frames. Or, anything else that demands maximum strength in two directions.
Features
• Unidirectional fabrics add strength in just one direction
• Never-twisted SM fiber with a tensile modulus of 33.4 MSI and strength of over 700 KSI
• Flawless, outward surface after curing
• 12" wide fabric lays up seamlessly side-by-side
• Integrated epoxy system provides consistent, flawless results
• Room temperature storage means this fabric is always ready to use—no freezing and thawing required!
Tips
• Use this fabric for marine and recreational applications.
• Unidirectional fabrics provide maximum strength in two directions—which is the direction the fibers run.
• Cure the resin with a vacuum bagging and a ramp-up heat cycle—less waste, and less curing time!
• All of our prepregs are shelf stable at room temperature for up to 12 months.
• When laying up in a mold, use a heat gun to make fabric more pliable—but be careful, it will also become tackier.
Fibre Glast is committed to ensuring that every roll of fabric we handle is First Quality and manufactured to the highest standards, so that you can expect the same properties and handling characteristics every time you order.
Click Here to View This Product: goo.gl/bg58X3
Increased Stiffness with an Integrated Resin System
This unidirectional is non-woven, so there is no crimping of the fibers and less than 3% of polyester binder is used on one side to allow for the highest possible density of carbon fibers. The resin system with curing agent has been preimpregnated into the fabric for an ideal 37% strength-to-weight ratio, and repeatable high-quality results.
This 9.0 oz fabric is widely used in marine applications such as boat hulls, but is also a great choice for recreational parts like hockey sticks and bicycle frames. Or, anything else that demands maximum strength in two directions.
Features
• Unidirectional fabrics add strength in just one direction
• Never-twisted SM fiber with a tensile modulus of 33.4 MSI and strength of over 700 KSI
• Flawless, outward surface after curing
• 12" wide fabric lays up seamlessly side-by-side
• Integrated epoxy system provides consistent, flawless results
• Room temperature storage means this fabric is always ready to use—no freezing and thawing required!
Tips
• Use this fabric for marine and recreational applications.
• Unidirectional fabrics provide maximum strength in two directions—which is the direction the fibers run.
• Cure the resin with a vacuum bagging and a ramp-up heat cycle—less waste, and less curing time!
• All of our prepregs are shelf stable at room temperature for up to 12 months.
• When laying up in a mold, use a heat gun to make fabric more pliable—but be careful, it will also become tackier.
Fibre Glast is committed to ensuring that every roll of fabric we handle is First Quality and manufactured to the highest standards, so that you can expect the same properties and handling characteristics every time you order.










