Uploaded August 2020 | Updated September 2026, 33 minutes ago
Drying the earthen kiln insulation, preparing the floor, and loading kiln in preparation for making a batch of charcoal. The first fire is relatively small and is intended to dry out some of the moisture in the clay/earth around the kiln remaining after construction and before winter. After cooling and cleaning it out, a "floor" is created above the steel floor slats using thin boards and brown charcoal from previous charcoal runs. Then the wood (mostly Pine) is split and stacked vertically from back to front leaving only a small airspace at the top. The front will be filled with kindling and bark and then the opening closed up and mostly sealed before lighting. Controlling the air intake slows down the burn and prevents loss/crumbling/cracking of charcoal wood.
the kiln: islandblacksmith.ca/2019/11/charcoal-kiln-v-4-0
making charcoal: islandblacksmith.ca/how-charcoal-is-made
Drying the earthen kiln insulation, preparing the floor, and loading kiln in preparation for making a batch of charcoal. The first fire is relatively small and is intended to dry out some of the moisture in the clay/earth around the kiln remaining after construction and before winter. After cooling and cleaning it out, a "floor" is created above the steel floor slats using thin boards and brown charcoal from previous charcoal runs. Then the wood (mostly Pine) is split and stacked vertically from back to front leaving only a small airspace at the top. The front will be filled with kindling and bark and then the opening closed up and mostly sealed before lighting. Controlling the air intake slows down the burn and prevents loss/crumbling/cracking of charcoal wood.
the kiln: islandblacksmith.ca/2019/11/charcoal-kiln-v-4-0
making charcoal: islandblacksmith.ca/how-charcoal-is-made
