Uploaded September 2025 | Updated November 2026, 3 hours ago
Turn a public domain woodcut into a laser-cut printing block you can ink and print on a press. In this walkthrough, you’ll see how to bring an image into Photoshop, invert it for relief printing, push it to true black and white with Curves, straighten a skewed scan with Perspective Warp, and crop before sending to your laser cutter. The example starts with a public domain image from the New York Public Library Digital Collections, then shows how sealing with shellac and inking lets you pull real relief prints.
What you’ll learn
- Why invert is essential for relief printing on a laser-cut block
- How to force artwork to 100% black or 100% white with Black and White + Curves
- Checking values with the Eyedropper so the laser cuts the right areas
- Two ways to straighten: Free Transform vs. Perspective Warp
- Cropping clean, parallel edges before exporting to your laser software
Chapters
00:00 Intro: Photoshop prep for laser cutting and printmaking
00:00:16 Duplicating an existing woodcut as a laser-cut block
00:00:29 Finding public domain woodcuts at the NYPL Digital Collections
00:00:41 Laser-cut blocks vs. laser prints
00:00:56 Invert adjustment layer for relief printing
00:01:07 Ensuring cut areas are 100% black
00:01:25 Black and White adjustment layer
00:01:37 Eyedropper check: not truly black yet
00:01:48 Curves adjustment to deepen blacks and lift whites
00:02:01 Using the Curves hand tool to target tones
00:02:13 Making whites pure white
00:02:26 Verifying the image is only black or white
00:02:38 Straightening option 1: Free Transform
00:02:49 Straightening option 2: Perspective Warp
00:03:01 Box, zoom, and pin alignment on all four corners
00:03:13 Warp and confirm to square everything up
00:03:25 Crop tool for clean, parallel edges
00:03:37 Export to your laser cutter, then shellac, ink, and print
Helpful notes
Source imagery: Search the NYPL Digital Collections for public domain woodcuts.
digitalcollections.nypl.org/items/fda93dc0-c606-012f-71bc-58d385a7bc34
Laser workflow tip: For relief blocks, ensure artwork is only solid black and solid white. The cutter will remove the black areas you designate, leaving the raised surface to take ink.
Printmaking tip: After cutting, seal the wood with shellac before inking to get cleaner impressions.
Hashtags
#Photoshop #LaserCutter #Printmaking #Woodcut #ReliefPrint #PublicDomain
Turn a public domain woodcut into a laser-cut printing block you can ink and print on a press. In this walkthrough, you’ll see how to bring an image into Photoshop, invert it for relief printing, push it to true black and white with Curves, straighten a skewed scan with Perspective Warp, and crop before sending to your laser cutter. The example starts with a public domain image from the New York Public Library Digital Collections, then shows how sealing with shellac and inking lets you pull real relief prints.
What you’ll learn
- Why invert is essential for relief printing on a laser-cut block
- How to force artwork to 100% black or 100% white with Black and White + Curves
- Checking values with the Eyedropper so the laser cuts the right areas
- Two ways to straighten: Free Transform vs. Perspective Warp
- Cropping clean, parallel edges before exporting to your laser software
Chapters
00:00 Intro: Photoshop prep for laser cutting and printmaking
00:00:16 Duplicating an existing woodcut as a laser-cut block
00:00:29 Finding public domain woodcuts at the NYPL Digital Collections
00:00:41 Laser-cut blocks vs. laser prints
00:00:56 Invert adjustment layer for relief printing
00:01:07 Ensuring cut areas are 100% black
00:01:25 Black and White adjustment layer
00:01:37 Eyedropper check: not truly black yet
00:01:48 Curves adjustment to deepen blacks and lift whites
00:02:01 Using the Curves hand tool to target tones
00:02:13 Making whites pure white
00:02:26 Verifying the image is only black or white
00:02:38 Straightening option 1: Free Transform
00:02:49 Straightening option 2: Perspective Warp
00:03:01 Box, zoom, and pin alignment on all four corners
00:03:13 Warp and confirm to square everything up
00:03:25 Crop tool for clean, parallel edges
00:03:37 Export to your laser cutter, then shellac, ink, and print
Helpful notes
Source imagery: Search the NYPL Digital Collections for public domain woodcuts.
digitalcollections.nypl.org/items/fda93dc0-c606-012f-71bc-58d385a7bc34
Laser workflow tip: For relief blocks, ensure artwork is only solid black and solid white. The cutter will remove the black areas you designate, leaving the raised surface to take ink.
Printmaking tip: After cutting, seal the wood with shellac before inking to get cleaner impressions.
Hashtags
#Photoshop #LaserCutter #Printmaking #Woodcut #ReliefPrint #PublicDomain

