Uploaded January 2021 | Updated November 2026, 3 hours ago
In this video, I demonstrate a practical technique to mechanically access your Hero 8's power button without removing the camera from its gimbal mount.
There will come a time when your GoPro Hero 8 is mounted in its gimbal ...powered off and no longer listening to voice commands (this will happen, for example, if a battery is removed for more than a minute before a charged battery is installed). To reenable voice commands, you just need to press the camera's power button. But pulling the camera out of its gimbal to power it up is a royal pain. You could otherwise mount the camera upside down (gaining easy access tot the power button) -- but now you can't reach your battery, USB connector, or SD Card.
But there is an easy workaround (demonstrated with my Hohem iSteady Pro 3 -- and where most GoPro-compatible gimbals use the same basic mounting method -- my trick ...or something like it... should work with most gimbal brands).
This trick will also work with a Hero 9, which has the same button and door configuration as the Hero 8 ...but where the Hero 9 can maintain a level horizon, there is little reason to mount a Hero 9 in a gimbal.
The second half of the video shows how to configure your power/mode button so your camera always starts in a preferred shooting mode (A useful one-time setup considering how it's possible to accidentally change modes with the same power/mode button). If you know how to make this setting -- there's no need to watch the second half of the video.
FYI - This video was recorded with a Hero 7 using a 4-diopter closeup lens attachment.
In this video, I demonstrate a practical technique to mechanically access your Hero 8's power button without removing the camera from its gimbal mount.
There will come a time when your GoPro Hero 8 is mounted in its gimbal ...powered off and no longer listening to voice commands (this will happen, for example, if a battery is removed for more than a minute before a charged battery is installed). To reenable voice commands, you just need to press the camera's power button. But pulling the camera out of its gimbal to power it up is a royal pain. You could otherwise mount the camera upside down (gaining easy access tot the power button) -- but now you can't reach your battery, USB connector, or SD Card.
But there is an easy workaround (demonstrated with my Hohem iSteady Pro 3 -- and where most GoPro-compatible gimbals use the same basic mounting method -- my trick ...or something like it... should work with most gimbal brands).
This trick will also work with a Hero 9, which has the same button and door configuration as the Hero 8 ...but where the Hero 9 can maintain a level horizon, there is little reason to mount a Hero 9 in a gimbal.
The second half of the video shows how to configure your power/mode button so your camera always starts in a preferred shooting mode (A useful one-time setup considering how it's possible to accidentally change modes with the same power/mode button). If you know how to make this setting -- there's no need to watch the second half of the video.
FYI - This video was recorded with a Hero 7 using a 4-diopter closeup lens attachment.










