Blade Attila | Powerful water pump!!! (1521,6 gallon/h at 12V) - 3D printed parts @AttilaBlade | Uploaded May 2018 | Updated October 2024, 4 hours ago.
#diy, #waterpump, #3dprinting
Powerful water pump!!! (1521,6 gallon/h at 12V) - 3D printed parts
Don't forget to check out my 2nd channel @east-europeansmarts πβ€οΈπ
Do you want more infos about my work? π₯Join my channel as a MEMBER via my community section! youtube.com/c/AttilaBlade/community Check it out!
If you don't want to be a member but you would like to support my efforts don't hesitate to use the Super THANKS button under my videos! π
If you want more informations and exclusive contents BUT NOT on youtube, please support my work on Patreon π:
patreon.com/bladeattila
Do you want more infos about my work? π₯Join my channel as a MEMBER via my community section! youtube.com/c/AttilaBlade/community Check it out!
If you don't want to be a member but you would like to support my efforts don't hesitate to use the Super THANKS button under my videos! π
If you want more informations and exclusive contents BUT NOT on youtube, please support my work on Patreon π:
patreon.com/bladeattila
The pump's motor is an 18V high speed leaf blower DC motor (maybe 775?) from a crashed plastic blower.
I had only a 12V battery for this test. Unfortunately!
I measured the water flow at 2m height with 3m long, 32 mm diameter PVC tube also with a 45 degrees elbow in the middle section. The suction side I've a 35 cm long tube with 32 mm diameter.
I started to use new banking platforms to buy spare parts for my experiments.
These are used from today as supporting possibilities, so if you can
please support my efforts via PayPal, Revolut or Transferwise
---------Via PayPal: https://paypal.me/bladeattila?country...
---------Via Revolut - My Revtag: @attilablade
---------Via Transferwise: info.kovacsattila[at]gmail.com
Do you want a banking service with no surprises or hidden costs?
Register now to Transferwise here:
wise.com/invite/u/attilak877
Join me and the more than 15 million users who have already fallen in love with Revolut.
Register with my link below:
revolut.com/referral/attilawfq6!DEC1AR
The water flow is 16 liters/ 10 sec= 5760 L/h = 1 521.6 US gallon/h at 2m!!!
That's crazy! :)
STL files are here, if you interested about it: drive.google.com/open?id=1k7-rbL3hHfLkiEV4dYEIbD8r152HYGh1
Subscribe and follow my channel: youtube.com/user/bladeattila
Google+: plus.google.com/u/0/+AttilaBlade/posts
Check my heat engine blog: http:manson-ericsson-hae.blogspot.hu
Support my efforts with a simple video sharing please
THANKS!
See You Soon!
BLADE
#diy, #waterpump, #3dprinting
Powerful water pump!!! (1521,6 gallon/h at 12V) - 3D printed parts
Don't forget to check out my 2nd channel @east-europeansmarts πβ€οΈπ
Do you want more infos about my work? π₯Join my channel as a MEMBER via my community section! youtube.com/c/AttilaBlade/community Check it out!
If you don't want to be a member but you would like to support my efforts don't hesitate to use the Super THANKS button under my videos! π
If you want more informations and exclusive contents BUT NOT on youtube, please support my work on Patreon π:
patreon.com/bladeattila
Do you want more infos about my work? π₯Join my channel as a MEMBER via my community section! youtube.com/c/AttilaBlade/community Check it out!
If you don't want to be a member but you would like to support my efforts don't hesitate to use the Super THANKS button under my videos! π
If you want more informations and exclusive contents BUT NOT on youtube, please support my work on Patreon π:
patreon.com/bladeattila
The pump's motor is an 18V high speed leaf blower DC motor (maybe 775?) from a crashed plastic blower.
I had only a 12V battery for this test. Unfortunately!
I measured the water flow at 2m height with 3m long, 32 mm diameter PVC tube also with a 45 degrees elbow in the middle section. The suction side I've a 35 cm long tube with 32 mm diameter.
I started to use new banking platforms to buy spare parts for my experiments.
These are used from today as supporting possibilities, so if you can
please support my efforts via PayPal, Revolut or Transferwise
---------Via PayPal: https://paypal.me/bladeattila?country...
---------Via Revolut - My Revtag: @attilablade
---------Via Transferwise: info.kovacsattila[at]gmail.com
Do you want a banking service with no surprises or hidden costs?
Register now to Transferwise here:
wise.com/invite/u/attilak877
Join me and the more than 15 million users who have already fallen in love with Revolut.
Register with my link below:
revolut.com/referral/attilawfq6!DEC1AR
The water flow is 16 liters/ 10 sec= 5760 L/h = 1 521.6 US gallon/h at 2m!!!
That's crazy! :)
STL files are here, if you interested about it: drive.google.com/open?id=1k7-rbL3hHfLkiEV4dYEIbD8r152HYGh1
Subscribe and follow my channel: youtube.com/user/bladeattila
Google+: plus.google.com/u/0/+AttilaBlade/posts
Check my heat engine blog: http:manson-ericsson-hae.blogspot.hu
Support my efforts with a simple video sharing please
THANKS!
See You Soon!
BLADE