Uploaded October 2026 | Updated November 2026, 2 hours ago
Not sure if your stone is being worked evenly on a flat lap? This quick rock-polishing guide shows you how to use the Sharpie test to find low spots, uneven contact, and areas your diamond disc has not reached yet.
Draw a simple marker grid across the clean, dry surface of the stone, make a few light passes on your flat lap, and then inspect the remaining lines. Marker disappears from the high areas first, while ink left behind reveals low spots that still need more grinding.
In this beginner-friendly lapidary guide, you’ll learn:
• How to mark a stone for the Sharpie test
• Why marker remains inside low areas
• How to check the contact pattern on a flat lap
• Why heavy pressure will not fix an uneven surface
• The difference between confirming contact and removing old scratches
• When the stone is ready for the next flat lap disc
The Sharpie test is especially useful during coarse grinding, flattening, and early smoothing stages. Just remember that removing the marker does not automatically remove every previous scratch. Before advancing to the next grit, make sure the entire surface has even contact and the scratches from the previous disc are completely gone.
This is Episode 2 of my Quick Rock Polishing Guides, created to give beginners clear lapidary answers without a long tutorial.
Watch next:
When to Move to the Next Flat Lap Disc
youtu.be/F3PY7x_ykcQ
CHAPTERS
00:00 The Sharpie Test
00:28 Why the Test Works
01:04 Step-by-Step Demonstration
02:17 Contact vs Scratch Removal
03:11 The Rule to Remember
#RockPolishing #FlatLap #Lapidary #HowToPolishRocks #WillORocks
Not sure if your stone is being worked evenly on a flat lap? This quick rock-polishing guide shows you how to use the Sharpie test to find low spots, uneven contact, and areas your diamond disc has not reached yet.
Draw a simple marker grid across the clean, dry surface of the stone, make a few light passes on your flat lap, and then inspect the remaining lines. Marker disappears from the high areas first, while ink left behind reveals low spots that still need more grinding.
In this beginner-friendly lapidary guide, you’ll learn:
• How to mark a stone for the Sharpie test
• Why marker remains inside low areas
• How to check the contact pattern on a flat lap
• Why heavy pressure will not fix an uneven surface
• The difference between confirming contact and removing old scratches
• When the stone is ready for the next flat lap disc
The Sharpie test is especially useful during coarse grinding, flattening, and early smoothing stages. Just remember that removing the marker does not automatically remove every previous scratch. Before advancing to the next grit, make sure the entire surface has even contact and the scratches from the previous disc are completely gone.
This is Episode 2 of my Quick Rock Polishing Guides, created to give beginners clear lapidary answers without a long tutorial.
Watch next:
When to Move to the Next Flat Lap Disc
youtu.be/F3PY7x_ykcQ
CHAPTERS
00:00 The Sharpie Test
00:28 Why the Test Works
01:04 Step-by-Step Demonstration
02:17 Contact vs Scratch Removal
03:11 The Rule to Remember
#RockPolishing #FlatLap #Lapidary #HowToPolishRocks #WillORocks

