Uploaded November 2026 | Updated November 2026, 2 hours ago
Burnishing vs polishing rocks is one of the most confusing parts of rock tumbling for beginners. Is burnishing the same as polishing? No. Polishing creates the shine, while burnishing cleans the shine by removing polish haze, residue, and fine film left behind after the final polish stage.
In this quick rock tumbling guide, I’ll show you the simple difference between polishing and burnishing, when burnishing actually helps, and when it will not fix the problem. If your tumbled rocks look hazy after polish, a burnishing cycle with clean water, clean media, and a small amount of Borax or mild soap may help clear up the finish.
But burnishing is not a repair step. It will not fix scratches, pits, cracks, bruising, undercutting, or a surface that was not ready before polish. If your rocks are still dull after burnishing, the problem probably started in an earlier rock tumbling stage.
This is Part 4 in my Quick Rock Tumbling Guides series from Will O’s Southwest Studio.
Final rule: Polish creates the shine. Burnishing cleans the shine.
◉══════[ CHAPTERS ]══════◉
00:00 Polishing vs Burnishing
00:30 Polish Creates the Shine
01:27 The Buffing Test
02:18 How to Burnish Rocks
03:14 What Burnishing Can’t Fix
04:26 Final Rule
#RockTumbling #RockPolishing #Lapidary #TumbledRocks #WillORocks
Burnishing vs polishing rocks is one of the most confusing parts of rock tumbling for beginners. Is burnishing the same as polishing? No. Polishing creates the shine, while burnishing cleans the shine by removing polish haze, residue, and fine film left behind after the final polish stage.
In this quick rock tumbling guide, I’ll show you the simple difference between polishing and burnishing, when burnishing actually helps, and when it will not fix the problem. If your tumbled rocks look hazy after polish, a burnishing cycle with clean water, clean media, and a small amount of Borax or mild soap may help clear up the finish.
But burnishing is not a repair step. It will not fix scratches, pits, cracks, bruising, undercutting, or a surface that was not ready before polish. If your rocks are still dull after burnishing, the problem probably started in an earlier rock tumbling stage.
This is Part 4 in my Quick Rock Tumbling Guides series from Will O’s Southwest Studio.
Final rule: Polish creates the shine. Burnishing cleans the shine.
◉══════[ CHAPTERS ]══════◉
00:00 Polishing vs Burnishing
00:30 Polish Creates the Shine
01:27 The Buffing Test
02:18 How to Burnish Rocks
03:14 What Burnishing Can’t Fix
04:26 Final Rule
#RockTumbling #RockPolishing #Lapidary #TumbledRocks #WillORocks





![Rock Tumbler Ceramic Media: Don’t Make These Mistakes
How much ceramic media should you add to a rock tumbler? In this quick rock tumbling guide, I’ll show you the simple rule beginners need to know: fill your barrel about two-thirds to three-quarters full with rocks and ceramic media combined.
Ceramic media helps fill empty space, cushion your rocks, improve tumbling action, and carry grit or polish through the barrel. But if you use too little, your rocks can crash into each other and come out chipped or bruised. If you use too much, the barrel can get crowded and stop tumbling correctly.
This video also covers one ceramic media mistake that can hurt your polish: adding brand-new, sharp media straight into pre-polish or polish. I’ll explain why new media should be broken in during Stage 1 or Stage 2 first.
This is the second video in my quick rock tumbling guides, made for beginners who want clear, straight-to-the-point answers without a full-length tutorial.
◉══════[ CHAPTERS ]══════◉
00:00 How Much Ceramic Media Should You Add?
01:32 What Ceramic Media Does in a Rock Tumbler
02:37 Correct Rock Tumbler Barrel Fill Level
03:45 Why You Should Break In New Ceramic Media
04:58 Rock Tumbling Ceramic Media Rule to Remember
#RockTumbling #RockTumbler #CeramicMedia #RockTumblingForBeginners #WillORocks Rock Tumbler Ceramic Media: Don’t Make These Mistakes](https://i.ytimg.com/vi/1ghJ0UlvGt8/mqdefault.jpg)




