Uploaded May 2021 | Updated November 2026, 3 hours ago
Hello video showing how to use USB drives which are plugged into Router with Plex via Drive Mapping
In Video i'm using a Netgear R7800 Router running OpenWRT with USB drive mapped into a Raspberry Pi running Plex
Plex Raspberry Pi
Make Directory/Folder
mkdir /home/pi/usbdrive1
Mount Point
sudo nano /etc/fstab
//192.168.1.1/USBplex /home/pi/usbdrive1 cifs guest,_netdev,x-systemd=automount 0 0
Mount Drive
sudo mount /home/pi/usbdrive1
Check Mount
cd /home/pi/usbdrive1
Check Files
ls
#Plex #Raspberrypi #OpenWRT
Hello video showing how to use USB drives which are plugged into Router with Plex via Drive Mapping
In Video i'm using a Netgear R7800 Router running OpenWRT with USB drive mapped into a Raspberry Pi running Plex
Plex Raspberry Pi
Make Directory/Folder
mkdir /home/pi/usbdrive1
Mount Point
sudo nano /etc/fstab
//192.168.1.1/USBplex /home/pi/usbdrive1 cifs guest,_netdev,x-systemd=automount 0 0
Mount Drive
sudo mount /home/pi/usbdrive1
Check Mount
cd /home/pi/usbdrive1
Check Files
ls
#Plex #Raspberrypi #OpenWRT










![TVheadend Recordings into Plex (Drive Mapping)
Video showing you how to add recordings from TVheadend into Plex via mapping a drive
TVheadend Raspberry Pi
Samba Install
sudo apt-get install samba
Samba
sudo nano /etc/samba/smb.conf
[TVheadend]
comment = TVheadend
public = yes
writeable = yes
browsable = yes
path = /home/hts
create mask = 0777
directory mask = 0777
guest ok = yes
only guest = no
Reboot
sudo reboot
Plex Raspberry Pi
Make Directory/Folder
mkdir /home/pi/plextv
Mount Point
sudo nano /etc/fstab
//192.168.1.238/TVheadend /home/pi/plextv cifs guest,_netdev,x-systemd=automount 0 0
Mount Drive
sudo mount /home/pi/plextv
Check Mount
cd /home/pi/plextv
Check Files
ls
TVheadend Format string (edit on string x was missing)
$c $t %F.$x
Have Fun
#RaspberryPi #TVheadend #Plex TVheadend Recordings into Plex (Drive Mapping)](https://i.ytimg.com/vi/exIKhU53CRQ/mqdefault.jpg)