Uploaded December 2016 | Updated November 2026, 2 hours ago
This video shows the alternate locations to run link wires for the HDMI port header on a 1200-series PS4 console with an SAC-001 motherboard.
If you ruin or lift a pad then follow the guide images on this video and connect a wire between the pin on the HDMI port and the shown location on the motherboard to restore that pins connection to the circuit.
Mentioned Videos:
================
How to run link wires:
youtube.com/watch?v=Ji51YUmMCrs
How to solder to vias:
youtube.com/watch?v=5P7bDsHVsV4
HDMI Pin-out for SAA/SAB-001 motherboards:
youtube.com/watch?v=KTQ5JkaLvaY
Equipment / Materials Needed:
==========================
Enameled / Magnet / Transformer Wire:
ebay.co.uk/itm/like/141523210679
PCB Overcoat Pen:
uk.farnell.com/circuitworks/cw3300g/overcoat-pen-green/dp/604045
************************************************************
Sorry for the video quality - photo's and diagrams are fine but sadly I've had to resort to a 1.3MP laptop webcam for this as my shitty LG G4 decided to pack up in a permanent boot-loop. New phone is here - just got to fiddle with the settings a bit to see what gives the best quality etc. Maybe we'll have to find a different cam setup altogether but we'll see how it goes.
Thanks for watching and please remember to comment, rate and subscribe for more - and if this helps you in any way then please watch and/or click an ad - it helps me to continue with what I do on this channel.
Many thanks,
Andy.
This video shows the alternate locations to run link wires for the HDMI port header on a 1200-series PS4 console with an SAC-001 motherboard.
If you ruin or lift a pad then follow the guide images on this video and connect a wire between the pin on the HDMI port and the shown location on the motherboard to restore that pins connection to the circuit.
Mentioned Videos:
================
How to run link wires:
youtube.com/watch?v=Ji51YUmMCrs
How to solder to vias:
youtube.com/watch?v=5P7bDsHVsV4
HDMI Pin-out for SAA/SAB-001 motherboards:
youtube.com/watch?v=KTQ5JkaLvaY
Equipment / Materials Needed:
==========================
Enameled / Magnet / Transformer Wire:
ebay.co.uk/itm/like/141523210679
PCB Overcoat Pen:
uk.farnell.com/circuitworks/cw3300g/overcoat-pen-green/dp/604045
************************************************************
Sorry for the video quality - photo's and diagrams are fine but sadly I've had to resort to a 1.3MP laptop webcam for this as my shitty LG G4 decided to pack up in a permanent boot-loop. New phone is here - just got to fiddle with the settings a bit to see what gives the best quality etc. Maybe we'll have to find a different cam setup altogether but we'll see how it goes.
Thanks for watching and please remember to comment, rate and subscribe for more - and if this helps you in any way then please watch and/or click an ad - it helps me to continue with what I do on this channel.
Many thanks,
Andy.

![MATRIX INFINITY INSTALL inside a SONY PSX!
Welcome to Part 7 of our Sony PSX DVR DESR-7000 Restoration Series. Today we are installing a brand new, old stock Matrix Infinity (green dot) v1.93 modchip. Check out the Sony PSX Repair playlist for the other parts of this restoration series. Hope you enjoy! :-)
Equipment used (Amazon Affiliated links):
Get 30 days of FREE Amazon Prime here:
http://www.amazon.co.uk/tryprimefree?tag=ytandrewpaul-21
Assembly / Disassembly Tools:
~~~~~~~~~~~~~~~~~~~~~
Case opening tools: https://amzn.to/3fmi4ly
Electric Screwdriver: Bosch Ixo - https://amzn.to/2VdEgr6
ESD Tweezer Set: https://amzn.to/2Vl9V9I
Gamebit Screwdrivers (Nintendo Switch): https://amzn.to/3ih8SAA
Screwdriver bit set: Draper 82398 - https://amzn.to/3jupZP5
Soldering Iron / Tools / Flux:
~~~~~~~~~~~~~~~~~~~
Control unit: JBC DDE-2B - https://amzn.to/3ldECIT
Handles: JBC T-245A
Handle Stands: JBC HD-SD - https://amzn.to/3BQF6KO
Tip Cleaner: JBC CL8499 - https://amzn.to/3C5Awsm
Hot-Air Rework Station: Quick 861DW - https://amzn.to/3lacaHS
Flux: Amtech NC-559-V2-TF - https://amzn.to/3lcU3Ry
PCB Holder: https://amzn.to/3j9iVHl
Diagnostics Tools (DMMs etc):
~~~~~~~~~~~~~~~~~~~~~
Multimeter: Fluke 117 - https://amzn.to/3zSDoa5
Multimeter (Budget-friendly): https://amzn.to/3iXCLVG
Serial to USB Adapter: DSD FTDI FT232L - https://amzn.to/3fbXzrw
USB Power Meter: Uni-T UT658-Dual - https://amzn.to/2VRpiHN
Microscope
Microscope: AmScope - https://amzn.to/3iQryYd
Scope Camera: HDMI C-Mount - https://amzn.to/3yQVhWx
Many thanks for watching this video - if it helps then please COMMENT, LIKE and SUBSCRIBE for more content like this.
If youre a new viewer then please check out the rest of my channel - I have over 100 videos on the channel focusing on PS4 / XBONE / Apple Macbook and iPhone repair.
LINKED VIDEOS:
- PLAYLIST: Sony PSX (DESR Series) Restoration Project
https://www.youtube.com/playlist?list=PLtwN0uxZVpoiMeTk0WsTJbARG8mF-V3BH
- Lets Modchip a PS2! (V7 Gap BIOS with Modbo 5.0D v1.93) #ps2 #mods
https://youtu.be/WRuNRZ6rK_Q
MUSIC:
Intro / Outro:
Song: JJD & Division One - Somebody Like Me (feat. Halvorsen) [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: http://NCS.io/JJDSomebody
Watch: http://youtu.be/
Many thanks to the brilliant Sappheiros for the backing tracks:
Sappheiros - Embrace.
https://www.youtube.com/watch?v=Prw2KXmXUA0
https://fanlink.to/QZw
License creativecommons.org/licenses/by/3.0/us/
Sappheiros - Promise.
https://www.youtube.com/watch?v=r4ctdl6q5Ac
https://fanlink.to/sappheiros-promise
License creativecommons.org/licenses/by/3.0/us/
Sappheiros - Reminiscense.
https://www.youtube.com/watch?v=ysfeVH3F9so
License creativecommons.org/licenses/by/3.0/us/ MATRIX INFINITY INSTALL inside a SONY PSX!](https://i.ytimg.com/vi/fN_0DWqyCyE/mqdefault.jpg)








