Uploaded May 2024 | Updated November 2026, 1 day ago
I had a project turning a bunch of plates. I had a good bit of 3/4 and 4/4 lumber that was suitable, but how do you hold the blank to get started? I used a Forstner bit to drill a recess on one of them. But then I remembered a club member talking about gluing on a glue block using CA. So, I gave it a try and decided that I really like this method. Take a look and see if maybe this method is a good one for you when turning thin stock.
Ack’s Wood Pastes
Available only at ackswoodpastes.com
Use “DOUG15” for 15% discount
ResinCrete
Use jdictioncraft.com/?ref=acrzze0s for a 10% discount
Parfix 3408 CA, the best CA on the market. Contact me on FaceBook Messenger for price and shipping.
Easy Wood Tools
easywoodtools.com
I had a project turning a bunch of plates. I had a good bit of 3/4 and 4/4 lumber that was suitable, but how do you hold the blank to get started? I used a Forstner bit to drill a recess on one of them. But then I remembered a club member talking about gluing on a glue block using CA. So, I gave it a try and decided that I really like this method. Take a look and see if maybe this method is a good one for you when turning thin stock.
Ack’s Wood Pastes
Available only at ackswoodpastes.com
Use “DOUG15” for 15% discount
ResinCrete
Use jdictioncraft.com/?ref=acrzze0s for a 10% discount
Parfix 3408 CA, the best CA on the market. Contact me on FaceBook Messenger for price and shipping.
Easy Wood Tools
easywoodtools.com

