Uploaded May 2017 | Updated November 2026, 7 hours ago
Rim: XXR 531 (17x9) {5x114.3}
Car: 2006 Acura RSX-S
This is a video of me trying put the gold metalizer for the first time.
4 coats of black (3 cans) and gold metallizer ( 2 cans) (driver side got glossifier while the passenger have none). It seem with glossifier, it show less of the flake but more dept in gloss. And yes, I did mask the wheel barrel. I decided not to dip it. You can definitely do all four wheels with 2-3 cans of black an 1 can of gold but due to the inside spoke, I use more product and i also spray it heavier compare to normal people.
Have any tips or advice for me? comment below because i am no pro lol
Bonus tips:
-don't for get to mask off the valve stem lol
-I prefer to remove the wheels instead of doing it on the car especially if your car have a lot of spoke (but if you have something like the stock 05-06 type S wheels, it should be fine)
- When you are below half can, it is harder to spray it at an 90 degree angle so angle it a bit up (remember this is a spray can, not a spray gun)
I can't promise that anything I show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen me make it look so easy. Talk to a qualified mechanic if you are in any doubt.
Rim: XXR 531 (17x9) {5x114.3}
Car: 2006 Acura RSX-S
This is a video of me trying put the gold metalizer for the first time.
4 coats of black (3 cans) and gold metallizer ( 2 cans) (driver side got glossifier while the passenger have none). It seem with glossifier, it show less of the flake but more dept in gloss. And yes, I did mask the wheel barrel. I decided not to dip it. You can definitely do all four wheels with 2-3 cans of black an 1 can of gold but due to the inside spoke, I use more product and i also spray it heavier compare to normal people.
Have any tips or advice for me? comment below because i am no pro lol
Bonus tips:
-don't for get to mask off the valve stem lol
-I prefer to remove the wheels instead of doing it on the car especially if your car have a lot of spoke (but if you have something like the stock 05-06 type S wheels, it should be fine)
- When you are below half can, it is harder to spray it at an 90 degree angle so angle it a bit up (remember this is a spray can, not a spray gun)
I can't promise that anything I show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen me make it look so easy. Talk to a qualified mechanic if you are in any doubt.










