Uploaded November 2026 | Updated November 2026, 3 hours ago
Skimming over Artex or another textured ceiling? Putting a coat of bonding on first means the finish can go on thin, but it caught Roger out.
Get the bonding near flat, then control the suction before you skim. If the bonding dries out, it'll pull the water straight out of your finish coat.
Roger's back at his friend Ben's house to plaster over a stubborn textured coating that wasn't coming off without taking the boards with it. Skimming it straight would have meant thickening the Multi-Finish to fill every contour, so the plan was bonding first and a thinner finish coat on top. The bonding didn't go off on day one, though, and by the next morning it had gone too far the other way.
KEY TAKEAWAYS
• Skimming straight over a heavy textured coating means building your finish coat up thick to fill the contours. A coat of bonding first gets the ceiling close to flat, so the finish can go on thin.
• Bonding coat can take a lot longer than you'd expect to go off over an old textured ceiling. Roger's hadn't set by the end of the first day, so he left it overnight.
• Leaving it overnight brought the opposite problem. The bonding dried right out and the suction pulled the moisture out of the finish, so he was working hard for no good reason.
• The fix is to prime a dry bonding coat with SBR or a PVA such as UniBond and let it go tacky before skimming. A splash of water on its own may not be enough.
• Mixing a bit of finish in with the bonding can get you there in one hit, although there's a risk it picks up too soon.
• On bigger jobs, plasterers work to a simple ratio: one black bucket of water to one bag of finish in a tall bucket, whisked in stages. Old bags and hot weather will both change how the plaster behaves.
WATCH NEXT
youtu.be/zCzoOLxWRtc
youtu.be/fp7OW9o5un0
CHAPTERS
00:00 Why we're skimming over the Artex
00:38 SBR and the first bonding coat
01:15 Roll-on versus trowel-on
02:05 First coat almost flat
05:58 Paper tape instead of scrim
06:29 Following the curve at the ceiling edge
07:25 Getting the mix to stick
07:51 Where it went wrong: suction
09:08 How many coats of bonding?
09:59 SBR to kill the suction
11:41 Too wet or about right?
12:01 One bag, one bucket: the mixing ratio
12:47 Old plaster and hot weather
Have you ever had plaster fight you on a ceiling? Tell us what caught you out in the comments.
#Plastering #Artex #Skimming #BondingCoat #SkillBuilder
====================
👇 SUPPORT SB - BECOME A MEMBER youtube.com/channel/UC9GdB6vG6m6cDAwrTAWXgyg/join
📪 JOIN OUR NEWSLETTER skill-builder.uk/signup
🛒 SEE OUR FAVOURITES ON AMAZON amazon.co.uk/shop/skillbuilder
🎧 LISTEN TO OUR PODCAST blubrry.com/skillbuilder/subscribe
🎬 OUR VIDEO LIBRARY youtube.com/@SkillBuilder/videos
🔗 SEE EVERYTHING SB ON LINKTREE https://linktr.ee/skillbuilder
🤝 WORK WITH US skill-builder.uk/media
facebook.com/skillbuilderchannel
tiktok.com/@skillbuilder
instagram.com/skill_builder
(As an Amazon Associate, we earn from qualifying purchases)
====================
OUR FAVOURITE CHARITIES
👷 BAND OF BUILDERS bandofbuilders.org
💡 THE LIGHTHOUSE CHARITY lighthousecharity.org
💧 CHARITY WATER charitywater.org
Skimming over Artex or another textured ceiling? Putting a coat of bonding on first means the finish can go on thin, but it caught Roger out.
Get the bonding near flat, then control the suction before you skim. If the bonding dries out, it'll pull the water straight out of your finish coat.
Roger's back at his friend Ben's house to plaster over a stubborn textured coating that wasn't coming off without taking the boards with it. Skimming it straight would have meant thickening the Multi-Finish to fill every contour, so the plan was bonding first and a thinner finish coat on top. The bonding didn't go off on day one, though, and by the next morning it had gone too far the other way.
KEY TAKEAWAYS
• Skimming straight over a heavy textured coating means building your finish coat up thick to fill the contours. A coat of bonding first gets the ceiling close to flat, so the finish can go on thin.
• Bonding coat can take a lot longer than you'd expect to go off over an old textured ceiling. Roger's hadn't set by the end of the first day, so he left it overnight.
• Leaving it overnight brought the opposite problem. The bonding dried right out and the suction pulled the moisture out of the finish, so he was working hard for no good reason.
• The fix is to prime a dry bonding coat with SBR or a PVA such as UniBond and let it go tacky before skimming. A splash of water on its own may not be enough.
• Mixing a bit of finish in with the bonding can get you there in one hit, although there's a risk it picks up too soon.
• On bigger jobs, plasterers work to a simple ratio: one black bucket of water to one bag of finish in a tall bucket, whisked in stages. Old bags and hot weather will both change how the plaster behaves.
WATCH NEXT
youtu.be/zCzoOLxWRtc
youtu.be/fp7OW9o5un0
CHAPTERS
00:00 Why we're skimming over the Artex
00:38 SBR and the first bonding coat
01:15 Roll-on versus trowel-on
02:05 First coat almost flat
05:58 Paper tape instead of scrim
06:29 Following the curve at the ceiling edge
07:25 Getting the mix to stick
07:51 Where it went wrong: suction
09:08 How many coats of bonding?
09:59 SBR to kill the suction
11:41 Too wet or about right?
12:01 One bag, one bucket: the mixing ratio
12:47 Old plaster and hot weather
Have you ever had plaster fight you on a ceiling? Tell us what caught you out in the comments.
#Plastering #Artex #Skimming #BondingCoat #SkillBuilder
====================
👇 SUPPORT SB - BECOME A MEMBER youtube.com/channel/UC9GdB6vG6m6cDAwrTAWXgyg/join
📪 JOIN OUR NEWSLETTER skill-builder.uk/signup
🛒 SEE OUR FAVOURITES ON AMAZON amazon.co.uk/shop/skillbuilder
🎧 LISTEN TO OUR PODCAST blubrry.com/skillbuilder/subscribe
🎬 OUR VIDEO LIBRARY youtube.com/@SkillBuilder/videos
🔗 SEE EVERYTHING SB ON LINKTREE https://linktr.ee/skillbuilder
🤝 WORK WITH US skill-builder.uk/media
facebook.com/skillbuilderchannel
tiktok.com/@skillbuilder
instagram.com/skill_builder
(As an Amazon Associate, we earn from qualifying purchases)
====================
OUR FAVOURITE CHARITIES
👷 BAND OF BUILDERS bandofbuilders.org
💡 THE LIGHTHOUSE CHARITY lighthousecharity.org
💧 CHARITY WATER charitywater.org










