Uploaded October 2017 | Updated November 2026, 1 hour ago
I saw an article in an old magazine discussing jigs for mitres and I came across this plane guide for mitre joints (miter joints). I have by no means replicated it to its true potential but I think you can see for yourself just how handy this would be and how accurate it could make mitre joints.
I have since made a mitre jig for my shooting board which I think is easier to use than this but I could still see this jig being of use. You could maybe have a plane always set up with this guide which could then be quickly used and readily available to cut those mitres.
Thank you for viewing, check out the various links below if you'd like to see what else I get up to, thanks a lot!
Twitch - twitch.tv/timberanew
Instagram - @timberanew instagram.com/timberanew
Facebook - facebook.com/timberanew
Instructables - instructables.com/member/timberanew
I saw an article in an old magazine discussing jigs for mitres and I came across this plane guide for mitre joints (miter joints). I have by no means replicated it to its true potential but I think you can see for yourself just how handy this would be and how accurate it could make mitre joints.
I have since made a mitre jig for my shooting board which I think is easier to use than this but I could still see this jig being of use. You could maybe have a plane always set up with this guide which could then be quickly used and readily available to cut those mitres.
Thank you for viewing, check out the various links below if you'd like to see what else I get up to, thanks a lot!
Twitch - twitch.tv/timberanew
Instagram - @timberanew instagram.com/timberanew
Facebook - facebook.com/timberanew
Instructables - instructables.com/member/timberanew

![How to Make a Planing Stop [Woodworking Jig]
I desperately needed a planing stop jig for planing down small boards, mostly for box making. This is a very simple woodworking jig and in this video I show how to make it.
Sometimes when you need to plane a small piece of wood a planing stop is a great addition to the workshop. It works much like a bench hook in that it hooks onto the workbench on the underside and on the top side theres a stop to hold the wood against.
One of the main differences is that the stop in this case needs to be as low as you can make it without it being too low (in case the wood your planing is slightly bowed which it often can be before milling). I decided to screw in the stops for this jig just to make them very secure, you might prefer to glue them and maybe Ill glue them in the future. Theres also a stop at a right angle so that a diagonal planing motion can be achieved.
Thank you for viewing, check out the various links below if youd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - https://www.twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/timberanew
Facebook - https://www.facebook.com/timberanew
Etsy - https://www.etsy.com/uk/shop/TimberAnew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
http://amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
http://amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
http://amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
http://amzn.to/2p4A4Xq - Amazon US How to Make a Planing Stop [Woodworking Jig]](https://i.ytimg.com/vi/YfEnwcgYrqY/mqdefault.jpg)


![Pallet Wood Ball and Claw Foot Lamp [Woodworking Project]
Wanting to make a slightly more challenging pallet wood project than usual I went for a ball and claw foot lamp with abstract shade. It wasnt the first thought in my head for sure but slowly developed into this bizarre item you see before you. I wouldnt say it was a particularly easy woodworking project but it was fun, interesting and was made for about £5! (without labour counted of course).
I used a variety of woodcarving chisels to make this project, mostly older chisels collected over time from eBay. In this video you see a few marples chisels along with some affordable bench chisels.
Thank you for viewing, check out the various links below if youd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - https://www.twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/timberanew
Facebook - https://www.facebook.com/timberanew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
http://amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
http://amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
http://amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
http://amzn.to/2p4A4Xq - Amazon US Pallet Wood Ball and Claw Foot Lamp [Woodworking Project]](https://i.ytimg.com/vi/Zatrgcr97FQ/mqdefault.jpg)


![Dovetail Keepsake Box [Woodworking Project] (Letter Carving)
I was asked to make a dovetail keepsake box for my 4 month old Great Nephew. I really struggled to find some material for this woodworking project until I saw a piece of old piano I had. Planing back the veneer revealed some (mystery) wood underneath which was perfect. I tried my hand at some letter carving as well, something Im very new to. Hopefully itll stand the test of time!
Thank you for viewing, check out the various links below if youd like to see what else I get up to, thanks a lot!
Twitch - https://www.twitch.tv/timberanew
Instagram - https://instagram.com/timberanew
Facebook - https://www.facebook.com/timberanew
Instructables - http://www.instructables.com/member/timberanew Dovetail Keepsake Box [Woodworking Project] (Letter Carving)](https://i.ytimg.com/vi/ZoHhFIi-HnQ/mqdefault.jpg)

![Hand Carved Spalted Beech Wall Clock [Woodworking Project]
I bought a few clock kits recently and wanted to try a couple of hand carved sculptural looking pieces. I used spalted beech to make this wall clock and a couple of chisels to do most of the shaping. The clock kits are relatively inexpensive and can be bought in many places, including amazon, you can find them on my US amazon shop here -
https://www.amazon.com/shop/timberanew
For the numbers I used some walnut dowels and simply carved them down to a shape I liked the look of. Since this video I have also made walnut hands for the clock and so done away with the hands that came with the kit.
Thank you for viewing, check out the various links below if youd like to see what else I get up to.
- - - - - - - - - - - - - - - - - - - -
Twitch - https://www.twitch.tv/timberanew
Instagram - @timberanew https://instagram.com/timberanew
Facebook - https://www.facebook.com/timberanew
Etsy - https://www.etsy.com/uk/shop/TimberAnew
- - - - - - - - - - - - - - - - - - - -
Tools I use in my videos (these are amazon affiliate links, I get a small commission for each sale at no cost to you)
Stanley Fatmax Coping Saw :
http://amzn.to/2FEibEX - Amazon US
Stanley Fatmax Tenon Saw :
http://amzn.to/2p9l6Pe - Amazon US
DeWalt Filip Drive Kit :
http://amzn.to/2DllajS - Amazon US
Bahco Fret Saw :
http://amzn.to/2p4A4Xq - Amazon US Hand Carved Spalted Beech Wall Clock [Woodworking Project]](https://i.ytimg.com/vi/Zxs-mlqcr-0/mqdefault.jpg)
