Uploaded January 2014 | Updated September 2026, 10 hours ago
Designed by Ammnra Creations
facebook.com/AmmnraCreations
NOTE: This is a kit to build a toy replica. This kit is designed specifically as a con-safe cosplay prop. The end of the prop is squared-off and blunt and is therefore in no way intended to create a potentially dangerous weapon. Any modification to the design as sold is outside the recommendation and responsibility of the creator and manufacturer of this kit.
Pirate Prop Kit: shpws.me/qGfP
Other Items used:
1/4 Elastic Bands (Light): amazon.com/gp/product/B002GCNZMU
1/4 Elastic Bands (Heavy): amazon.com/gp/product/B00A9N7DF8
Foil Tapes: Hardware Store or McMaster-Carr
Sand Paper: Hardware Store (220 grit)
Paper Clips (1mm diameter wire): Staples
Fishing Line (0.5mm dia): Sports/Hobby Store
Ring: shpws.me/op1i
Black Acrylic Paint: Hobby Store (Americana Brand)
Double Stick Tape : Hobby Store
Straps: Hobby Store
McFarlane Prop:
amazon.com/McFarlane-Toys-Assassins-Creed-IV/dp/B00EGMXTI8
Tools:
Razor Blade/Exacto
Clippers
Paint Brush
Old Tooth Brush
Drill/Dremel
Missing a part: shapeways.com/contact/contact_form_customer_service?email_to=service@shapeways.com
Got a question about shipping: shapeways.com/support/shipping
Got a question about Materials: shapeways.com/materials
Want it pre-made:
etsy.com/shop/AmmnraCreations
Sold Out - No Longer Available Fully Assembled (Follow via Facebook for updates)
DAOTF:
I've found dual action is a cool gimmick but I have yet to figure out a way that doesn't make the overall design significantly worse. I feel my gravity designs are the most visually faithful, reliable, comfortable, affordable, accessible and safe designs I have come up with that maintain the important elements for a cosplay/display piece. Perhaps one day I (or another more crafty person) will noodle out a way to integrate the DA functionality elegantly without such sacrifices but, despite all my efforts, I still haven't seen a way to add DA that I'd be happy enough with to sell.
Designed by Ammnra Creations
facebook.com/AmmnraCreations
NOTE: This is a kit to build a toy replica. This kit is designed specifically as a con-safe cosplay prop. The end of the prop is squared-off and blunt and is therefore in no way intended to create a potentially dangerous weapon. Any modification to the design as sold is outside the recommendation and responsibility of the creator and manufacturer of this kit.
Pirate Prop Kit: shpws.me/qGfP
Other Items used:
1/4 Elastic Bands (Light): amazon.com/gp/product/B002GCNZMU
1/4 Elastic Bands (Heavy): amazon.com/gp/product/B00A9N7DF8
Foil Tapes: Hardware Store or McMaster-Carr
Sand Paper: Hardware Store (220 grit)
Paper Clips (1mm diameter wire): Staples
Fishing Line (0.5mm dia): Sports/Hobby Store
Ring: shpws.me/op1i
Black Acrylic Paint: Hobby Store (Americana Brand)
Double Stick Tape : Hobby Store
Straps: Hobby Store
McFarlane Prop:
amazon.com/McFarlane-Toys-Assassins-Creed-IV/dp/B00EGMXTI8
Tools:
Razor Blade/Exacto
Clippers
Paint Brush
Old Tooth Brush
Drill/Dremel
Missing a part: shapeways.com/contact/contact_form_customer_service?email_to=service@shapeways.com
Got a question about shipping: shapeways.com/support/shipping
Got a question about Materials: shapeways.com/materials
Want it pre-made:
etsy.com/shop/AmmnraCreations
Sold Out - No Longer Available Fully Assembled (Follow via Facebook for updates)
DAOTF:
I've found dual action is a cool gimmick but I have yet to figure out a way that doesn't make the overall design significantly worse. I feel my gravity designs are the most visually faithful, reliable, comfortable, affordable, accessible and safe designs I have come up with that maintain the important elements for a cosplay/display piece. Perhaps one day I (or another more crafty person) will noodle out a way to integrate the DA functionality elegantly without such sacrifices but, despite all my efforts, I still haven't seen a way to add DA that I'd be happy enough with to sell.
