Pin Stitch 1 Over 1 Tutorial @PamsCraftyCorner
Pin Stitch 1 Over 1 Tutorial  @PamsCraftyCorner
Uploaded August 2020 | Updated November 2026, 11 hours ago
I show how I do a pin stitch to start and a pin stitch to finish when stitching 1 over 1. In this example I am using 25 count fabric.

Here are written instructions to follow along with video if you have audio issues:

To start a thread. Go down through the center of where your X should be splitting the fabric strand creating a hole. Leave a tail sticking out on top of your fabric. Come up through the fabric hole you would normally use if starting your X (for me that's the bottom left hole) Go back down through the 1st hole you created that has the tail stiching out. (Don't pull the tail through. Come up in the diagonal hole (for me it's the top right). Go back down through the center hole you created with the tail sticking out. Pin stitch that creates 1st leg of your X is now done. Cut floss tail that's sticking out flush to your fabric. Carry on going up through bottom right hole and down through top left hole to completed your full X.

To end a thread. Come up through the bottom of the of the center strand of fabric splitting the fabric to create a new hole. Go down through the center of that same fabric strand creating a 2nd hole. Up through the top of that same fabric strand creating a 3rd. Down through the center hole again(the 2nd one you created). The pin stitch is now done. Come up through the 1st hole you created and cut your floss flush with your fabric.

Thank you for watching

Music: bensound.com
Pin Stitch 1 Over 1 TutorialFlossmas 2024 - Day 13Flossmas/Vlogmas 2020 - Day 18Flossmas 2023 - Day 11Flossmas 2025 Day 20Flossmas 2023 - Day 3Stitchmaynia 2021 - Day 17Stitchmaynia 2020 - Days 14-16Flossmas 2023 - The Last DaysFlossmas 2024 - Day 10Flossmas 2022 Day 6Flossmas 2024 - Day 15
Pams Crafty Corner |

Pin Stitch 1 Over 1 Tutorial

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER