Pimoroni Pirate Radio Internet Radio Build @TheRadiogeek
Pimoroni Pirate Radio Internet Radio Build  @TheRadiogeek
Uploaded January 2019 | Updated November 2026, 3 hours ago
Today we will take a look at the Pimoroni Pirate Radio Kit. This is a cool little internet radio kit that runs on Linux and a Raspberry PI computer. This Video is about the kit build and some problems I had and what I found for fixes. Please see the notes and Links below for all the information I talk about in the video.

(NOTES AND LINKS)

Buy a Pimoroni Pirate Radio

adafruit.com/product/3477
#####
LINKS:
learn.pimoroni.com/tutorial/sandyj/assembling-pirate-radio
learn.pimoroni.com/tutorial/sandyj/soldering-phats
learn.pimoroni.com/tutorial/sandyj/streaming-spotify-to-your-pi
github.com/pimoroni/phat-beat/blob/master/projects/vlc-radio/README.md
learn.pimoroni.com/tutorial/sandyj/internet-radio-on-your-pirate-radio
raspberrypi.org/downloads/raspbian
raspberrypi-spy.co.uk/2017/04/manually-setting-up-pi-wifi-using-wpa_supplicant-conf
raspberrypi.org/forums/viewtopic.php?t=61324

#####
DEFAULT LOGIN for Raspbian Stretch lite

login: pi
Password: raspberry
###################
WIFI SETUP:

sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

country=us
update_config=1
ctrl_interface=/var/run/wpa_supplicant

network={
scan_ssid=1
ssid="MyNetworkSSID"
psk="Pa55w0rd1234"
}

Once you've made those changes, press control and x, then y, and then enter to save and close the file.

Now, type sudo reboot and press enter to reboot. Your Pi should now be connected to Wi-Fi.

#####
RUNNING THE INSTALLER (Can't Type the | key problem (see KEYBOARD PROBLEM BELOW) )

To run the installer, type the following:

curl get.pimoroni.com/vlcradio | bash

The installer will prompt you several times, and you should type y for all of these, and the installer should also ask if you'd like to reboot once the installation is complete. If it doesn't, then restart by typing sudo reboot again.

#####
KEYBOARD PROBLEMS:

Re: Can't type a '#'.

Quote

Mon Dec 29, 2014 8:41 am
You need to remap your keyboard. By default it is set to a UK map.

at the command line type:

sudo nano /etc/default/keyboard
and hit enter. locate the following line

XKBLAYOUT=”gb”
Change the gb to us (This assumes you want a us mapping, if not replace the gb with the two letter code for your country)

and reboot your machine.

if it pauses for a long time during the keyboard mapping stage, enter the following at the command line:

sudo setupcon
Your next reboot should be much faster.

######
ADDING STATIONS

Adding your own stations

The list of stations is in a file in /home/pi/.config/vlc called playlist.m3u. You can edit it by typing sudo nano /home/pi/.config/vlc/playlist.m3u in a terminal, adding the URLs for the stations, one per line, and then pressing control and x, then y, then enter to save and exit. After rebooting (type sudo reboot) the new stations should be available.

There's also an easier way to do this. Shut down your Pi (type sudo shutdown -h now in the terminal) and remove the micro SD card. Pop it into your desktop or laptop's SD card slot, and it should mount the boot partition. You can now use your favourite text editor to add the URLs of the internet radio stations, one per line, saving the file with the filename playlist.m3u. When you put the SD card back into your Pi, our software will copy that file across to /home/pi/.config/vlc/playlist.m3u and the new stations that you added should be available.

You should be able to find URLs for streaming internet radio stations by Google-ing something like "internet radio stream URLs".
Taking it further

VLC actually includes a rudimentary web interface for controlling the stream remotely. You should be able to access this by going to the URL http://raspberrypi.local:8080 or http://192.168.0.2:8080 (where 192.168.0.2 is the IP address of your Pi) in your browser.

##########################
FINDING STATIONS

forums.pimoroni.com/t/pirate-radio-is-worthless/4823


######
USING

After install you should be asked to reboot. If not, reboot :)

When the VLC Radio is ready to rock, the VU should flash once briefly. Press FF or REV to start playback.

You can also access the VLC server via http on port 8080 if you'd like to add streams or control playback and volume if you are not right next to the radio (leave username blank and use password raspberry).

Playlist:

A default playlist is supplied with the project, but you can (and probably will want to) tune in your favorite stations, of course.

You can either create a playlist.m3u and drop it in your home folder (in /home/pi/.config/vlc/), or if you don't feel like logging in via ssh you may also drop the playlist.m3u in the /boot partition of your SD from another computer and the VLC daemon will copy it in place for your convenience.

Reboot (or restart the vlcd service) after editing or creating the file for it to take effect.
#######

Music : Rondo Brother Rondobrothers.com
Opening Song: Dolphin
Pimoroni Pirate Radio Internet Radio BuildOptimus Stereo Mate AM FM Pocket Radio 12 610Sparton Bluebird radioMK484 Radio with New Circuit and information on the MK484 TA7642Bell and Howell 9 band am fm shortwave radioZenith Clock Radio E462W from 1973Emerson 1940s Table RadioAM FM Panasonic RF 689 radioSharp Z-1000 AM FM Radio AKA Model Z1000, FX-208U Radio ReviewShortwave Radio Pirate 6930khz 10 31 2020Mobile Baptist BuildersNIA RD-206SP Pocket Radio Night Time AM Band Scan
TheRadiogeek |

Pimoroni Pirate Radio Internet Radio Build

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER