Uploaded March 2015 | Updated November 2026, 3 hours ago
Here’s how to use the pickled method (this basically tans hide) when mounting your deer antlers. This will preserve the hide on the skull cap instead of boiling it off and covering it with felt, leather, or doing the European skull mount.
I’ve been doing this for over thirty years for the antlers that I don’t get a full shoulder mount. The process is simple an effective. It will last when done right, you don’t have to worry about all the hair falling out and looking ratty in a couple of years.
First start by getting your buck capped at the butcher. If you do it yourself check the video for a couple tips on keeping some extra hide on the cap.
Cut a gallon jug down and place the skull and hide down. Fill to you cover the cap with equal parts WHITE vinegar and either spring or distilled water. Add a cup of salt and stir it up good. Try not to have the brine or simple tanning solution too deep as to cover too much of the antlers. Leave it soak for one week, stirring every couple days. You can replace the brine mid week if you want, that isn’t necessary.
After a week remove and rinse thoroughly with water to remove all the vinegar smell. Heavily salt the underside of the skull, covering all the bone area. Don’t get too much salt on the hide if you can avoid it. Let it dry for at least two weeks or more.
Get a nice pine or bass wood plaque from your local hobby store and stain/polyurethane it in the color of your choice.
Now comes the unpleasant part, you have to cut the extra bone off the skull so it will sit flush with your plaque. You can use a sander, or band saw, or a hack saw if that’s all you have.
When that’s ready you can either hot glue or mount it to your plaque using screws from the back side into the bone.
Dress it up with the year, add the shotshell, casing, or arrowhead from however you harvested it. Hang it on the wall and enjoy the memories for decades to come.
Here’s how to use the pickled method (this basically tans hide) when mounting your deer antlers. This will preserve the hide on the skull cap instead of boiling it off and covering it with felt, leather, or doing the European skull mount.
I’ve been doing this for over thirty years for the antlers that I don’t get a full shoulder mount. The process is simple an effective. It will last when done right, you don’t have to worry about all the hair falling out and looking ratty in a couple of years.
First start by getting your buck capped at the butcher. If you do it yourself check the video for a couple tips on keeping some extra hide on the cap.
Cut a gallon jug down and place the skull and hide down. Fill to you cover the cap with equal parts WHITE vinegar and either spring or distilled water. Add a cup of salt and stir it up good. Try not to have the brine or simple tanning solution too deep as to cover too much of the antlers. Leave it soak for one week, stirring every couple days. You can replace the brine mid week if you want, that isn’t necessary.
After a week remove and rinse thoroughly with water to remove all the vinegar smell. Heavily salt the underside of the skull, covering all the bone area. Don’t get too much salt on the hide if you can avoid it. Let it dry for at least two weeks or more.
Get a nice pine or bass wood plaque from your local hobby store and stain/polyurethane it in the color of your choice.
Now comes the unpleasant part, you have to cut the extra bone off the skull so it will sit flush with your plaque. You can use a sander, or band saw, or a hack saw if that’s all you have.
When that’s ready you can either hot glue or mount it to your plaque using screws from the back side into the bone.
Dress it up with the year, add the shotshell, casing, or arrowhead from however you harvested it. Hang it on the wall and enjoy the memories for decades to come.










