Uploaded April 2023 | Updated November 2026, 5 days ago
This video demonstrates how to make H-band noise figure measurements using a Keysight X-Series signal analyzer with N9069EM0E Noise Figure Measurement Application software. This application software is running inside the Keysight X-Series signal analyzer, and also requires other hardware such as a system downconverter, noise source, and microwave signal generator as an LO for noise figure measurement. This demo video is for the H-band noise figure measurement, but it can be scalable to W-band or D-band, by selecting other VDI converter and noise source for specific bands.
For 30-day trial license of X-apps, please visit:
keysight.com/find/X-Series_apps_trial
Application Note:
How to Make D-band Noise Figure Measurement with Signal Analyzer
keysight.com/us/en/assets/3122-1579/application-notes/How-to-Make-D-band-Noise-Figure-Measurement-with-Signal-Analyzer.pdf
For more information, visit:
keysight.com/find/n9069em0e
This video demonstrates how to make H-band noise figure measurements using a Keysight X-Series signal analyzer with N9069EM0E Noise Figure Measurement Application software. This application software is running inside the Keysight X-Series signal analyzer, and also requires other hardware such as a system downconverter, noise source, and microwave signal generator as an LO for noise figure measurement. This demo video is for the H-band noise figure measurement, but it can be scalable to W-band or D-band, by selecting other VDI converter and noise source for specific bands.
For 30-day trial license of X-apps, please visit:
keysight.com/find/X-Series_apps_trial
Application Note:
How to Make D-band Noise Figure Measurement with Signal Analyzer
keysight.com/us/en/assets/3122-1579/application-notes/How-to-Make-D-band-Noise-Figure-Measurement-with-Signal-Analyzer.pdf
For more information, visit:
keysight.com/find/n9069em0e




![[3] EP-Scan for Compliance Checks
Understand how EP-Scan enables compliance-driven validation of channel performance, delivering clear pass/fail outcomes for faster design decisions and reduced manual result review.
By the end of this session, PCB designers can:
- Apply predefined compliance limits for industry interfaces
- Identify failing nets with clear pass/fail status
- Define custom specifications for impedance and loss metrics
- Generate reports with summarized results and SI metrics
EP-Scan 2026 Download Page:
https://www.keysight.com/find/ep-scan-downloads
Apply for a Free Trial:
https://edaapps.software.keysight.com
Watch full EP‑Scan playlist:
https://www.youtube.com/playlist?list=PLtq84kH8xZ9G1mJrSbCQkSDGoqqiq7F0s
Reference layouts used in this playlist:
Download from Keysight EDA: https://www.keysight.com/us/en/assets/9926-01485/miscellaneous/reference-layout-EP-Scan-Introduction.zip [3] EP-Scan for Compliance Checks](https://i.ytimg.com/vi/CyzFh0HKZdk/mqdefault.jpg)





