Uploaded April 2026 | Updated November 2026, 12 hours ago
This week on Maker Update: a song you can print in plastic, a tape measure for football fields, a custom control panel, and adding textures to your 3d prints.
+Show Notes [Maker Update Ep.479]+
=Project of the Week=
3d Printing a Song by Super Valid Designs 0:27
youtube.com/watch?v=QZZD3ODLs_Y
=More Projects=
Guinness World Record Tape Measure by Ali Spagnola 3:02
youtube.com/watch?v=_GptQ0BmwkI
Rocket Selfie Camera by BPS.Space 4:00
youtube.com/watch?v=G61T-5d9jiA
Lego-Style Sim Racing Dash by Xshift 4:52
youtube.com/watch?v=qbU20-ULeZM
=Tips & Tools=
Every Hardware Protocol Explained in 6 Minutes by Tech Explained 5:30
youtube.com/watch?v=0rlpwVNyBO8
Any Texture On Your 3d Prints by CNC Kitchen 6:00
youtube.com/watch?v=rTBkjR7JvzI
bumpmesh.com
3d Printed Concrete Molds by CNC Bratan 6:31
youtube.com/watch?v=ig0CmUef3sQ
=DigiKey Spotlight=
Product Unboxing: M5Stack Tab5 IoT Dev Kit 7:11
youtube.com/watch?v=ok58Z6icQF4
Find the M5Stack Tab5 IoT Dev Kit on DigiKey
digikey.com/en/products/detail/m5stack-technology-co-ltd/K145/26740594
--------
#makerupdate
Maker Update is a weekly video series covering news, projects, tips, and events that interest the maker and DIY community.
Find more online:
Blog: makerprojectlab.com
Instagram: instagram.com/makerprojectlab
This week on Maker Update: a song you can print in plastic, a tape measure for football fields, a custom control panel, and adding textures to your 3d prints.
+Show Notes [Maker Update Ep.479]+
=Project of the Week=
3d Printing a Song by Super Valid Designs 0:27
youtube.com/watch?v=QZZD3ODLs_Y
=More Projects=
Guinness World Record Tape Measure by Ali Spagnola 3:02
youtube.com/watch?v=_GptQ0BmwkI
Rocket Selfie Camera by BPS.Space 4:00
youtube.com/watch?v=G61T-5d9jiA
Lego-Style Sim Racing Dash by Xshift 4:52
youtube.com/watch?v=qbU20-ULeZM
=Tips & Tools=
Every Hardware Protocol Explained in 6 Minutes by Tech Explained 5:30
youtube.com/watch?v=0rlpwVNyBO8
Any Texture On Your 3d Prints by CNC Kitchen 6:00
youtube.com/watch?v=rTBkjR7JvzI
bumpmesh.com
3d Printed Concrete Molds by CNC Bratan 6:31
youtube.com/watch?v=ig0CmUef3sQ
=DigiKey Spotlight=
Product Unboxing: M5Stack Tab5 IoT Dev Kit 7:11
youtube.com/watch?v=ok58Z6icQF4
Find the M5Stack Tab5 IoT Dev Kit on DigiKey
digikey.com/en/products/detail/m5stack-technology-co-ltd/K145/26740594
--------
#makerupdate
Maker Update is a weekly video series covering news, projects, tips, and events that interest the maker and DIY community.
Find more online:
Blog: makerprojectlab.com
Instagram: instagram.com/makerprojectlab





![Take it for a Spin [Maker Update] | Maker.io
This Week on Maker Update: a top that won’t stop, overmolding your 3d printed parts, a twerking bot, and a guide to finishing your projects, no matter what they are.
+Show Notes [Maker Update Ep.467]+
=Project of the Week=
Overengineered Spinning Top by Aaed Musa 0:29
https://www.youtube.com/watch?v=Wp5NodfvvF4
=More Projects=
Tiny Walking Bot by Dorian Todd 3:00
https://www.youtube.com/watch?v=1UDsWkcQZhc
Fastener Counting Machine by Christopher Helmke 4:06
https://www.youtube.com/watch?v=IRBd9d30pRA&pp=ugUEEgJlbg%3D%3D
Dumpster Fire Model by North of the Border 5:04
https://www.youtube.com/watch?v=f1OBhxS6RgQ
=Tips & Tools=
Overmolding of 3d Printed Parts by Anonymous Kiwi 5:51
https://www.youtube.com/watch?v=kpUjnAPUKm0
Amazing LED Diffusers by Mirza Makes 6:31
https://www.youtube.com/watch?v=AdxYnMlzYUM
How to Finish Every Project by Stuck at Prototype 7:05
https://www.youtube.com/watch?v=pjzuAi9NE8A
=DigiKey Spotlight=
Motorized Ice Cream Maker by Tomorrow Lab 7:40
https://www.youtube.com/watch?v=pQJFSTl5OOE
#makerupdate
Maker Update is a weekly video series covering news, projects, tips, and events that interest the maker and DIY community.
Find more online:
Blog: http://makerprojectlab.com
Instagram: https://www.instagram.com/makerprojectlab/ Take it for a Spin [Maker Update] | Maker.io](https://i.ytimg.com/vi/iWnmNPQ_44Y/mqdefault.jpg)




![Plowing Ahead [Maker Update] | Maker.io
This week on Maker Update: remote control snow patrol, cleaning up after Wall-E, fighting plastic with plastic, and a boogie-down Bottango bot.
+Show Notes [Maker Update Ep.474]+
=Project of the Week=
1/7 PB 600 Snowcat with 12-way Blade by Willem Smith (4x3D) 0:26
https://youmagine.com/designs/ea2e008d-95f2-42de-b343-d7fddfc5ef6f#top
=More Projects=
Can I Turn M-O from Wall-E into a Real Vacuum? by Kiaras Workshop 1:58
https://www.youtube.com/watch?v=ZdyHG45VR3Y
Can a 3D Printed Combat Robot Actually Do Damage? by Makers Muse 2:56
https://www.youtube.com/watch?v=pm5FW0dlryY
Droid-Style RC Animatronics Using Bottango and ESP32 by Donald Bell 3:54
https://www.instructables.com/Droid-Style-RC-Animatronics-Using-Bottango-and-ESP/
=Tips & Tools=
Simple Screw Counter by mitxela 4:37
https://mitxela.com/projects/screwcounter
Dont Waste Time on Wrong ESP32 Pins by Vman Builds 5:05
https://www.youtube.com/watch?v=E4LxQvyeiWw
Arcade Fightstick by John Park 6:08
https://learn.adafruit.com/arcade-fightstick
=DigiKey Spotlight=
Electronics Teardowns and Recycling - Electronics with Becky Stern 6:50
https://www.youtube.com/watch?v=agOJkBQqup8
#makerupdate
Maker Update is a weekly video series covering news, projects, tips, and events that interest the maker and DIY community.
Find more online:
Blog: http://makerprojectlab.com
Instagram: https://www.instagram.com/makerprojectlab/ Plowing Ahead [Maker Update] | Maker.io](https://i.ytimg.com/vi/lUVlauwsN8I/mqdefault.jpg)