Pedaltrain Novo 18 to a Novo 24 - More is More! @paulbradshawguitar

Pedaltrain Novo 18 to a Novo 24 - More is More! @paulbradshawguitar

Uploaded December 2025 | Updated September 2026, 2 weeks ago

Check out all the elements on this board build here:
thmn.to/thocf/hy011lioih

Just add the Turbo Tuner / Barber Gain Changer / Chase Secret Preamp

-- -- --
Support me by using any of these links:
►Thomann Affiliate🔊: thomann.de/de/index.html?offid=1&affid=3523
►Gear I Use 🔊: thmn.to/thocf/fi5qa1i74l
-- -- --
►All my Fractal audio presets 🎸: ko-fi.com/s/5a6542f393
-- -- --
►NAM + TONEX packs ☕: ko-fi.com/paulbradshawguitar
-- -- --
►All my links 🎧: https://linktr.ee/paulbradshawguitar
-- -- --
►Guitar Youtube Collective on DISCORD : discord.gg/YBrYTvJmGr
-- -- --
follow me on IG here : instagram.com/paulbradshawguitar

TIME STAMPS
00:00 Going from a Pedaltrain Novo 18 to a Pedaltrain Novo 24
02:29 Pedaltrain Novo 18 next to a Novo 24
04:03 Cioks SOL grip v2 replaced with a Cioks DC7 on the new board
04:59 Updated board
07:00 TONES - Dry then adding in effects for my base tone
08:30 TONES - adding in the Source Audio Collider
09:48 TONES Barber Gain Changer
10:18 TONES Ditto looper x4
10:55 TONES too much gain and Octave / glitch action
11:35 TONES ditto looper x4 hold/functions
12:08 Final Thoughts

#pedalboard #pedalboardoftheday #guitar

Pedaltrain Novo 18 to a Novo 24 - More is More!

Pedalboard build 2025 : Strymon, EHX, Line6 and more

Quad Cortex : Multiband compressor trick

When should I change the preamp tubes? - Before and After test

TIGHTEST noise gate setup in your DAW #guitar #metal #musicproduction #metalguitar #riff #shorts

$NEW FIRMWARE - Fractal FM3 Firmware 13 beta 3 Checking out the latest BETA Firmware on the FM3 Get it here: https://forum.fractalaudio.com/forums/fm3-discussion.114/ Please remember to backup presets/settings before trying out beta firmware, if youve got a lot of gigs going Id recommend sticking to official firmware releases to be safe Heres the rundown: The FM3 is now up to date with Axe-Fx III firmware release 32.06. This version uses FM3 DynaCabs 1.09. Amp Modeling improvements based on the latest Axe-Fx III Firmware. NEW Amp Models: Brit JVM Crunch Green, Orange and Red models based on the Crunch channel of JVM410. PVH 6160 Block Clean. Deluxe Tweed Normal (Existing model renamed to “Deluxe Tweed Bright”). Improved power amp modeling. Improved preamp and power tube grid modeling. Improved frequency response across models. Refined multiple model parameters using new analysis techniques. Many amps now feel more responsive and “open.” Existing presets are updated automatically. Updated models to use new preamp bias and cathode-follower values, improving response. Improved JCM800 and Plexi models based on new insights. New “TRANSISTOR” Power Tube Type. This type is now the default for the Jazz 120 model. Existing presets automatically updated. Fixed a cap value in 5153 100W Red amp model. New Swedish Metal Drive pedal model based on a Boss™ HM-2 Heavy Metal. The 1S2473 diode from this model is also now available as a Diode Type for other models. Improved Chorus block including the following new models and updates. Japan CE-1 Chorus. Based on a Boss CE-1 in chorus mode. Japan CE-1 Vibrato. Based on a Boss CE-1 in vibrato mode. Japan CH-1. Based on a Boss CH-1. MX234. Based on an MXR M234 Analog Chorus. Small Copy. Based on an EXH Small Clone. Japan CE-2 Bass. Based on a Boss CE-2B. Vibrato. A generic vibrato effect. Rockguy: Based on the Rockman X-100 chorus. MX134 Stereo: Based on an MXR M134 Stereo Chorus. Remastered the Japan CE-2 model. Added new EQ controls to some chorus models. The Input Gate and Gate block now allow faster Attack times down to 0.1 ms. Note: Setting Attack and Release times too fast in any gate can cause distortion. Pitch tracking improvements: Increased high range to ~2500 Hz to allow better tracking of pinch harmonics etc. Improved low frequency shifting for , e.g. bass guitars. Reduced CPU usage in some blocks. Changed default values of Dual Head Tape type in Delay block to be a bit more musical. Reverb types are now grouped by shared prefixes—like “Spring” and “Plate”—making things easier to find. Added micro Delay controls to the Mixer block. These let you delay each signal by up to 64 samples for precise phase alignment and latency compensation in parallel routings. Note: Such extremely short delays (1 sample ≈ 0.02 ms), are NOT intended for audible echo effects. Plex Master Pitch now only controls pitch and not detune. Master Detune still only controls detune. Various other improvements. Support me by using any of these links: ►Thomann Affiliate🔊: https://www.thomann.de/de/index.html?offid=1&affid=3523 ►Gear I Use 🔊: https://thmn.to/thocf/fi5qa1i74l ►GVM Lights : https://shop.gvmled.com/?sca_ref=7456514.KSJxOK7Ztb ►All my Fractal audio presets 🎸: https://ko-fi.com/s/5a6542f393 ►NAM + TONEX packs ☕: https://ko-fi.com/paulbradshawguitar ►All my links 🎧: https://linktr.ee/paulbradshawguitar ►Guitar Youtube Collective on DISCORD : https://discord.gg/YBrYTvJmGr follow me on IG here : https://instagram.com/paulbradshawguitar/ #fractalaudio TIMESTAMPS 00:00 Fractal FM3 Firmware 13 beta 3 00:15 Whats New? where to download beta firmware 02:05 Comparing Firmware 12 tones to Firmware 13 beta3 03:40 TEST Firmware 12 vs Firmware 13 beta3 05:56 Initial Thoughts 07:19 HM-2 - Swedish Metal 07:55 HM-2 TONES 10:24 Faster Gate 11:40 Chorus 14:52 Rockguy Chorus & Delay & Verb 15:40 Final thoughts$

Peavey Classic 20mh - it even has a USB port

$Fractal AM4 Boot Time #fractalaudio #shorts$

I got to try Helix Stadium + The Biggest gig Ive ever played

Nano CORTEX as a replacement for my FM3 rig ?

$Fractal AM4 - First look - Full overview Get your AM4 here: https://www.g66.eu/en/products/fractal-audio/am4 https://www.fractalaudio.com/am4/ TRS to XLR cable: https://thmn.to/thoprod/193909?offid=1&affid=3523 A huge thanks to @G66eu for their support and sending this out for upcoming videos/content Fractal Talk can be seen on their channel thanks for watching! ►All my Fractal audio presets 🎸: https://ko-fi.com/s/5a6542f393 Support me by using any of these links: ►Thomann Affiliate🔊: https://www.thomann.de/de/index.html?offid=1&affid=3523 ►Gear I Use 🔊: https://thmn.to/thocf/fi5qa1i74l ►NAM + TONEX packs ☕: https://ko-fi.com/paulbradshawguitar ►All my links 🎧: https://linktr.ee/paulbradshawguitar ►Guitar Youtube Collective on DISCORD : https://discord.gg/YBrYTvJmGr follow me on IG here : https://instagram.com/paulbradshawguitar/ TIME STAMPS 00:00 Fractal AM4 00:19 Overview of the hardware 00:34 I/O of the Fractal AM4 01:25 AM4 size/dimensions on a pedalboard 01:46 A note on power from Cioks/power supplies 02:07 Connecting the AM4 to a mixing desk or interface via TRS and XLR 03:00 Boot time 03:24 Footswitch modes ( scenes , presets, effects ) 05:16 Navigation on the actual device 07:15 TONE quick palette cleanser 07:47 AM4 Edit 08:19 Standard view in the Editor 10:27 Expert edit / expert mode 13:10 Controlling AM4 modes via AM4 editor 14:24 Series or Parallel routing 15:10 Making a preset from scratch 16:40 TONE basic plexi preset 17:40 Gapless switching 17:59 TONE heavy gain and gapless switching 19:07 Final thoughts$

John Connearn Interview #shorts #guitar #interview

Paul Bradshaw |

Pedaltrain Novo 18 to a Novo 24 - More is More!