PCB Courtyards Can Get Close, But Call Your Assembler First @AltiumAcademy
PCB Courtyards Can Get Close, But Call Your Assembler First  @AltiumAcademy
Uploaded November 2026 | Updated November 2026, 3 hours ago
Altium Develop lets your assembler comment on the design during layout, so you can find out how close your parts can sit before you commit to a dense placement: altium.com/develop?utm_source=youtube&utm_medium=video&utm_campaign=altium-academy-shorts&utm_content=pcb-courtyards-can-get-close-but-call-your-assembler-first

PCB courtyards can overlap in some cases, and this clip from Zach Peterson's courtyard vs. clearance walkthrough shows what that looks like in a layout. Pull the parts in tight and the courtyard outlines start to cross, with leads closer than 10 mil (.25 mm). Allow a BGA clearance of .5 mm at U1 and the overlap is certain.

That breaks the whole idea of a courtyard, which is that outlines only run up to each other and touch to mark your clearance limit. So before a dense placement, ask your assembler how close your components can get, then define a clearance between courtyard layers or set a component-to-component design rule.

▶ Watch the full video: youtu.be/rlRuTu9BlSQ

📚 More from this Short:
- Component Clearance placement rule in Altium Designer: altium.com/documentation/altium-designer/pcb-placement-rule-component-clearance
- Working with mechanical layers and courtyard component layer pairs: altium.com/documentation/altium-designer/mechanical-layers
- Eurocircuits component clearance requirements for assembly: eurocircuits.com/technical-guidelines/pcb-assembly-guidelines/component-clearances

💡 Watch Next:
- PCB Courtyard vs Component Clearance: How Close Can Parts Get? (full video): youtu.be/rlRuTu9BlSQ
- Creating a PCB Footprint Courtyard in Altium Designer: youtube.com/watch?v=Qhe8BgAFokc
- Altium Training - PCB Design Rules Creation: Component Clearance Design Rule: youtu.be/oKujm--ngsw
- PCB Assembly: Your Assembler & Your Cuckoo Layouts: youtube.com/shorts/oG4quoIzwZM
- PCB Assembly Mistakes Designers Keep Making: PCB West 2026 Preview: youtu.be/NfpMqeP6JnA

💡 Stay Connected:

Don't forget to like, comment, and subscribe for more in-depth tutorials and tips from @AltiumAcademy Share your thoughts and questions in the comments below!

👉 Subscribe for more: youtube.com/@AltiumAcademy?sub_confirmation=1

Don't forget to follow us on social to stay up-to-date on the latest Altium Academy content.

👉 Follow Altium on TikTok: tiktok.com/@altiumdesigner
👉 Follow Altium on Twitter: twitter.com/altium
👉 Follow Altium on Linkedin: linkedin.com/company/altium
👉 Follow Altium on Facebook: facebook.com/AltiumOfficial

The Altium Academy is an online experience created to bring modern education to PCB Designers and Engineers all across the world. Here you can access a vast library of free training and educational content covering everything from basic design to advanced principles and step-by-step walkthroughs. Join industry legends as they share their career knowledge, review real-life design projects, or learn how to leverage one of Altium's leading design tools. No matter your level of experience, the Altium Academy can help you become a better Designer and Engineer!

About Altium LLC
Altium LLC (ASX:ALU), a global software company based in San Diego, California, is accelerating the pace of innovation through electronics. From individual inventors to multinational corporations, more PCB designers and engineers choose Altium software to design and realize electronics-based products.

#altium #pcbdesign #pcblayout
PCB Courtyards Can Get Close, But Call Your Assembler FirstAltium Training - PCB Design Rule Checks: PCB Rules and Violations PanelAltium Training - Design Review and CommentingsAltium Training - PCB Introduction: View CommandsReverse Polarity Protection Diode: Dont Wire It in ParallelAI PCB Layout vs. Human Design: The Honest TruthAltium Training - PCB Global Editing and List Panel: The List PanelAltium Training - PCB Introduction: Preference SettingsPCB Courtyard vs Component Clearance: How Close Can Parts Get?Altium Training - PCB Viewing and Navigation: Cross Probe Mode: Cross Select ModeAltium Training - Schematic Updating: Constraints Manager - Creating Classes: Adding Design RulesPCB Grounding: Why SGND Doesnt Always Mean Signal Ground
Altium Academy |

PCB Courtyards Can Get Close, But Call Your Assembler First

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER