Uploaded November 2026 | Updated November 2026, 3 hours ago
GTA 6 Stained Glass, I Really Screwed Up
20% off ALL brackets through Monday night, no code needed: aglimpseinside.org
etsy.com/shop/aglimpseinsideSHOP
GTA 6 is not even out yet and it has already done a billion dollars in revenue and sold 12 million copies. So I figured I would commemorate one of the biggest launches in history the only way I know how, by building it. This is a faux stained glass GTA 6 sunset, Mount Kalaga with the helicopter, poured in resin section by section on acrylic, mounted on a lightboard so the whole thing lights up.
Before the big one, I practiced on a Gulf Oil sign. That one has family history behind it. My grandfather on my mother's side owned a Pure Oil station in Akron, Ohio after World War II, then moved to Miami and ran a Quaker State station for years. Miami, gasoline, Vice City. It all ties together. The Gulf sign came out pretty good, minus a little blue leaking into the white, fixed with a toothpick and some patience. There is also a pair of Cars & Bids practice pieces in here, black and white mirror images of each other, and one genuinely ugly sign that is going into a random customer's order as a surprise. You have been warned.
Then the main piece went sideways, and it was a chain reaction. I set it face down on a textured moving blanket at 16 hours when the resin needed a full 24 to cure. Sanding out the damage left swirl marks and cloudy spots. The flood coat went on in a 40 degree shop, so it was full of microbubbles that would not rise and pop. The tape dam I built to protect the lightboard electronics curled right into the resin under the heat gun. It honestly felt like my first day on the job.
The save: sand the edge flat, run a bead of 5 minute epoxy around the whole thing, and cut a brand new black acrylic frame for it. It now hangs on a little French cleat in our upstairs TV room, looks good with the lights off, and pops when you plug it in. Not bad for a project that tried to die three times.
What is the worst shop mistake you have ever managed to save? And what game logo should get this treatment next?
Thanks for watching.
Chris
My affiliates and the stuff I actually use:
TotalBoat (the resin in this video): totalboat.com/AGlimpseInside
Amazon Storefront: amazon.com/shop/influencer-822ac1f8
My Workshop Favorites: amazon.com/shop/influencer-822ac1f8/list/2IN6TWH4SFZEY
Starbond (code AGI15): starbond.com
Carbon Method: carbonmethod.com/?ref=wzyl79y3
Taylor Toolworks: https://lddy.no/1fn08
Patreon, full plans library and early videos: patreon.com/aglimpseinsideprojects
As an Amazon Associate I earn from qualifying purchases.
Chapters:
00:00 GTA 6 is not even out yet
00:30 Practice run: the Gulf Oil sign
02:02 The Cars & Bids practice pieces
03:12 Finding the lightboard
03:43 Finishing the Gulf sign
04:52 Designing the Mount Kalaga artwork
05:36 Setting up the lightboard piece
06:48 Time lapse: weeding and pouring the colors
07:56 How it hangs: a French cleat, of course
09:17 The screw up: face down on a moving blanket
10:11 Sanding damage, swirls and cloudy spots
10:54 The tape dam and the flood coat
12:28 Microbubbles: the 40 degree shop problem
14:16 The save: 5 minute epoxy and a new black frame
14:48 Back to the Cars & Bids pieces
15:31 The final reveal
15:41 Hanging it in the TV room
16:19 A surprise for one lucky customer
GTA 6 Stained Glass, I Really Screwed Up
20% off ALL brackets through Monday night, no code needed: aglimpseinside.org
etsy.com/shop/aglimpseinsideSHOP
GTA 6 is not even out yet and it has already done a billion dollars in revenue and sold 12 million copies. So I figured I would commemorate one of the biggest launches in history the only way I know how, by building it. This is a faux stained glass GTA 6 sunset, Mount Kalaga with the helicopter, poured in resin section by section on acrylic, mounted on a lightboard so the whole thing lights up.
Before the big one, I practiced on a Gulf Oil sign. That one has family history behind it. My grandfather on my mother's side owned a Pure Oil station in Akron, Ohio after World War II, then moved to Miami and ran a Quaker State station for years. Miami, gasoline, Vice City. It all ties together. The Gulf sign came out pretty good, minus a little blue leaking into the white, fixed with a toothpick and some patience. There is also a pair of Cars & Bids practice pieces in here, black and white mirror images of each other, and one genuinely ugly sign that is going into a random customer's order as a surprise. You have been warned.
Then the main piece went sideways, and it was a chain reaction. I set it face down on a textured moving blanket at 16 hours when the resin needed a full 24 to cure. Sanding out the damage left swirl marks and cloudy spots. The flood coat went on in a 40 degree shop, so it was full of microbubbles that would not rise and pop. The tape dam I built to protect the lightboard electronics curled right into the resin under the heat gun. It honestly felt like my first day on the job.
The save: sand the edge flat, run a bead of 5 minute epoxy around the whole thing, and cut a brand new black acrylic frame for it. It now hangs on a little French cleat in our upstairs TV room, looks good with the lights off, and pops when you plug it in. Not bad for a project that tried to die three times.
What is the worst shop mistake you have ever managed to save? And what game logo should get this treatment next?
Thanks for watching.
Chris
My affiliates and the stuff I actually use:
TotalBoat (the resin in this video): totalboat.com/AGlimpseInside
Amazon Storefront: amazon.com/shop/influencer-822ac1f8
My Workshop Favorites: amazon.com/shop/influencer-822ac1f8/list/2IN6TWH4SFZEY
Starbond (code AGI15): starbond.com
Carbon Method: carbonmethod.com/?ref=wzyl79y3
Taylor Toolworks: https://lddy.no/1fn08
Patreon, full plans library and early videos: patreon.com/aglimpseinsideprojects
As an Amazon Associate I earn from qualifying purchases.
Chapters:
00:00 GTA 6 is not even out yet
00:30 Practice run: the Gulf Oil sign
02:02 The Cars & Bids practice pieces
03:12 Finding the lightboard
03:43 Finishing the Gulf sign
04:52 Designing the Mount Kalaga artwork
05:36 Setting up the lightboard piece
06:48 Time lapse: weeding and pouring the colors
07:56 How it hangs: a French cleat, of course
09:17 The screw up: face down on a moving blanket
10:11 Sanding damage, swirls and cloudy spots
10:54 The tape dam and the flood coat
12:28 Microbubbles: the 40 degree shop problem
14:16 The save: 5 minute epoxy and a new black frame
14:48 Back to the Cars & Bids pieces
15:31 The final reveal
15:41 Hanging it in the TV room
16:19 A surprise for one lucky customer










