Uploaded November 2022 | Updated November 2026, 12 hours ago
In the next generation of PAVE, our offering can support and interact with the next generation of design and BIM solutions that our clients and designers are developing.
When paving or milling to a model, the design needs to be overlayed with the existing profile. This profile can be generated by a dense tradition grid or more generally by use of a Lidar scan that many thousands of points per metre squared, rather than a single traditional level. It is vital that any profile captured is coordinated to enable GPS to be used for paver or planer location. The model for depth of cut or paving, is then uploaded to the machine for execution. In essence, the horizontal 'x' and 'y' axis are generated by coordinates, and the vertical 'z' level by the required model.
When Lidar is being deployed it enables a detailed profile to be generated that can be colour coded, to visualise the surface and contours, to assist with water movement and defect removal. The Lidar scans can be carried out from 'static' or from vehicle mounted instruments. The mobile scans give the benefit of speed, and can be carried out under normal road conditions, thus removing the requirement for traffic management.
On general highways the whole process can significantly improve ride quality, by milling the existing carriageway to a model that removes the high and low points.
Immersed in a BIM model, Tarmac can offer access to the design, or live on site with a Virtual, Mixed and Augmented reality capability. Access for the entire project team at any time to bring a scheme to life, exploring, planning, and managing the project for all is facilitated by Pave.
#3droad
#tarmactech
#technology
In the next generation of PAVE, our offering can support and interact with the next generation of design and BIM solutions that our clients and designers are developing.
When paving or milling to a model, the design needs to be overlayed with the existing profile. This profile can be generated by a dense tradition grid or more generally by use of a Lidar scan that many thousands of points per metre squared, rather than a single traditional level. It is vital that any profile captured is coordinated to enable GPS to be used for paver or planer location. The model for depth of cut or paving, is then uploaded to the machine for execution. In essence, the horizontal 'x' and 'y' axis are generated by coordinates, and the vertical 'z' level by the required model.
When Lidar is being deployed it enables a detailed profile to be generated that can be colour coded, to visualise the surface and contours, to assist with water movement and defect removal. The Lidar scans can be carried out from 'static' or from vehicle mounted instruments. The mobile scans give the benefit of speed, and can be carried out under normal road conditions, thus removing the requirement for traffic management.
On general highways the whole process can significantly improve ride quality, by milling the existing carriageway to a model that removes the high and low points.
Immersed in a BIM model, Tarmac can offer access to the design, or live on site with a Virtual, Mixed and Augmented reality capability. Access for the entire project team at any time to bring a scheme to life, exploring, planning, and managing the project for all is facilitated by Pave.
#3droad
#tarmactech
#technology




