Part 4. DIY Internal Combustion Engine Made from Old Compressor - Crankcase from Aluminum & JB Weld @makerj101
Part 4. DIY Internal Combustion Engine Made from Old Compressor - Crankcase from Aluminum & JB Weld  @makerj101
Uploaded July 2017 | Updated November 2026, 2 days ago
This part we will be manufacturing a crankcase out of a sheet of aluminum and LOTS of my favorite glue, JB Weld!! I even made the cover to the crankcase removable so that I can repair the engine if needed. I used a nut and a bolt to make an access port so I can take the engine apart if I need to. I made a pretty funny mistake in this video so keep your eye out for it(i may have made a play on a common saying). Stay tuned for part 5! Oh and at the end of the video I said that it will be finished in part 8. I can't math and I meant part 6, derp.

Why? Because it will be a challenge and I like a little challenge. The main constraints that I have put on this project are limited power tools. I will only use a battery drill, hacksaw, and other common hand tools and materials. Working with constraints are what real world engineers basically do and I find it challenging and fun working in this way. There are three reason for trying to do this with minimal tools: 1. so anyone, even someone in a third world country can replicate. 2. to show what you might be able to do in an apocalyptic situation. 3. creative thinking. I hope you enjoy. Please leave ideas and suggestions in the comments below!

Instagram and Facebook for project updates, and pictures of casting, making, hacking, building, and more!
instagram.com/makerj101
facebook.com/makerj101

Keep exploramenting and thank you for watching!
Don't forget to subscribe for more! youtube.com/user/makerj101?sub_confirmation=1firmation=1
Part 4. DIY Internal Combustion Engine Made from Old Compressor - Crankcase from Aluminum & JB WeldCasting an Aluminium Cube - Experimenting with Fluxs - Homemade Free Green Sand from Common ClayPart 3. DIY Internal Combustion Engine Made from Old Compressor - Head from Intel Heat SinkNew Intro Video, Fume Extractor, Building Solar Panels, ZVS Driver Talk, and UpdatesLaptop Teardown3KW DIY Solar Project Part 4 - Putting the Panels Up On the Roof and Hooking Up the DC WiringStirling Engine #4 Build5000 Subscribers! Thank You So Much!! Sneak Peak of Frequency Counter Project Using Binary CounterMerry Christmas!!! Putting Valve Cover Back on My CarHelp Needed!!! (not any more, thanks!) Replacing Toyota Corolla Valve CoverIC Engine Featured in Hot Rod Magazine and I Got a Job!!!Manipulator Tear Down and How it Works - SCR Pulse Width Modulation Type Motor Controller Circuit
Makerj101 |

Part 4. DIY Internal Combustion Engine Made from Old Compressor - Crankcase from Aluminum & JB Weld

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER