Uploaded December 2024 | Updated September 2026, 3 weeks ago
This is part 2 of a video series where I design a Christmas ornament in vCarve and then demonstrate how to take that design and be able to produce the ornament using a CNC router, a Laser Machine, or print it on a 3D printer.
In this video I demonstrate how to make the ornament on a CNC router using the vCarve template file we produced in the first video. if you haven't seen the first video it is strongly recommended you watch that video first. That video can be seen at the link below:
youtu.be/cOWDEay5bSE
The series of videos along with other holiday video ideas will be listed in the Playlist: youtube.com/playlist?list=PLbuKRLARGPOy4dZH14IS5ZZigjuheapG2
You'll learn step-by-step how to use the vectric template file and modify the material and design location to cut the ornament previously designed and saved as a template file.
What you'll learn in this video
➡️ How to modify a previously saved vCarve Template file to be able to cut your project with the material you want to use.
➡️ Methods for cutting the ornament on the CNC, including holding methods and sequencing toolpaths.
The vectric file for the Gingerbread ornament, along with a Lightburn file, and STL file will be available on my website once the full video series is complete.
⏰Timecodes⏰
00:00 Opening and setting up the Vectric File to use
01:45 Material Setup
03:35 Validate toolpaths and fine tune
06:00 Start Project at the CNC
07:00 Holding Method for Material hold down
14:00 Ornament Cleanup
14:40 Project Summary
The material used was purchased from Smokey Hill Designs. The pattern can be seen at the following link: smokeyhilldesigns.com/products/patternply%C2%AE-acrylic-starry-sky-two-sided-on-clear?_pos=1&_psq=starry&_ss=e&_v=1.0
====================
Connect with me !
====================
Website: robsandstromdesigns.com
Instagram: instagram.com/robsandstromdesigns
Facebook: facebook.com/robsandstromdesigns1
I love to pass on knowledge and skills Learned. My quest with this channel is to Share knowledge and skills that I have obtained and Inspire others to learn new things and use that knowledge to make cool stuff. Don't let fear get in the way of success.
This is part 2 of a video series where I design a Christmas ornament in vCarve and then demonstrate how to take that design and be able to produce the ornament using a CNC router, a Laser Machine, or print it on a 3D printer.
In this video I demonstrate how to make the ornament on a CNC router using the vCarve template file we produced in the first video. if you haven't seen the first video it is strongly recommended you watch that video first. That video can be seen at the link below:
youtu.be/cOWDEay5bSE
The series of videos along with other holiday video ideas will be listed in the Playlist: youtube.com/playlist?list=PLbuKRLARGPOy4dZH14IS5ZZigjuheapG2
You'll learn step-by-step how to use the vectric template file and modify the material and design location to cut the ornament previously designed and saved as a template file.
What you'll learn in this video
➡️ How to modify a previously saved vCarve Template file to be able to cut your project with the material you want to use.
➡️ Methods for cutting the ornament on the CNC, including holding methods and sequencing toolpaths.
The vectric file for the Gingerbread ornament, along with a Lightburn file, and STL file will be available on my website once the full video series is complete.
⏰Timecodes⏰
00:00 Opening and setting up the Vectric File to use
01:45 Material Setup
03:35 Validate toolpaths and fine tune
06:00 Start Project at the CNC
07:00 Holding Method for Material hold down
14:00 Ornament Cleanup
14:40 Project Summary
The material used was purchased from Smokey Hill Designs. The pattern can be seen at the following link: smokeyhilldesigns.com/products/patternply%C2%AE-acrylic-starry-sky-two-sided-on-clear?_pos=1&_psq=starry&_ss=e&_v=1.0
====================
Connect with me !
====================
Website: robsandstromdesigns.com
Instagram: instagram.com/robsandstromdesigns
Facebook: facebook.com/robsandstromdesigns1
I love to pass on knowledge and skills Learned. My quest with this channel is to Share knowledge and skills that I have obtained and Inspire others to learn new things and use that knowledge to make cool stuff. Don't let fear get in the way of success.
